Philips 21 9 Manual

For  use  with   Net  TV   .  .  .
- Tab  and  Shift  Tab   =  Next   and  Previous
-  Home   =  scroll   to  the   top   of   the   page
-  End   =  scroll   to  the   bottom  of   the   page
-  Page  Up   =  jump  one  page  up
-  Page  Down   =  jump  one  page  down
-  +  =  zoom   in   one  step
-  -  =  zoom   out   one  step
-  *   =  fit  to  width
USB  mouse
You   can   connect   a  USB   mouse  to  navigate   pages  on   the   Internet.
On  an   Internet  page,   you   can   select  and  click...

Use  a  DVI  to  HDMI   adapter  to  connect   the   PC  to  HDMI   and  an
audio   L/R  cable   to  connect   the   Audio  L/R  to  the   back   of   the   TV.
Ideal  TV  setting
Set   the   TV   picture   format   to  Unscaled   for   the   sharpest   picture
quality.   While   watching   TV,   press  t  ADJUST ,  select Picture
format   and  select  Unscaled.
For  a  list   of   supported   resolutions   see  Help > Specifications  >
Display   resolutions .
62Connections  /   Connect  more   devices 

5.5Network
Wireless
To   set   up  the   wireless  network   connection,  read  Help > Setup  >
Network .
Wired
To   set   up  the   wired  network   connection ,  read Help > Setup  >
Network
Connect  the   router   to  the   TV   with   a  network   cable.  To   fulfil
EMC   regulations,  use  a  shielded  FTP  Cat.   5E  Ethernet   cable.
Connections  /   Network63 

5.6SD card
Memory size
To   store   videos   downloaded   from  a  Video  store   on   Net  TV,   you
need  to  insert   an   SD  memory  card   into  the   TV   SD  card   slot.
Once  formatted,  leave  the   card   permanently  in   the   slot.
SD  memory  card  size
Use  a  SD  HC  (High   Capacity)   memory  card   with   at  least  4GB  of
storage  capacity.
For  high -definition  (HD)   video,  use  an   SD  card   with   at  least  8GB
of   storage  capacity.   Use  a  speed  class  2   card   or...

5.7Common interface CAM
CAM
Scrambled  digital   TV   channels   can   be  decoded   with   a  Conditional
Access   Module  (CAM).  Digital   TV   service   operators   provide  the
CAM   when   you   subscribe  to  their   services.  Contact   a  digital   TV
service   operator   for   more   information  and  to  see  terms   &
conditions.
Insert   a  CAM
Switch   off   the   TV   before   inserting   a  CAM.
Look  on   the   CAM   for   the   correct   method  of   insertion.  Incorrect
insertion...

6
6.1
Troubleshooting
Contact information
If   the   advice   and  suggestions  in   Troubleshooting   do   not   help
resolve   the   problem,  try   switching   the   TV   off   and  back   on   again.
Warning
If   your   TV   breaks  down, NEVER  try   to  repair   the   TV   yourself.
Consumer  Care
If   the   TV   problem  is  not   solved   you   can   call  the   Consumer   Care
hotline   in   your   country.   Look  up  the   TV   model   and  serial  number
before   you   call.  Find  the...

6.2TV and remote control
The   TV  does   not   switch   on
•   Switch   the   TV   off   and  on   again  with   the   switch   on   the   bottom
of   the   TV.
•   Check   the   power   cable   connection.
•   Try  using  the   keys   on   the   TV   to  switch   on.
The   TV  does   not   switch   on   from  standby
•   Check   that  the   batteries   of   the   remote   control   are   not   empty
or  weak.  Check   their   +  /   -  orientation.
•   Try  using  the   keys   on   the   TV   to...

6.3TV channels
Some   TV  channels   are  gone
•   Check   if  the   correct   list   is  selected  in   the   Channel   list.  Press   ¬
FIND   to  open   the   Channel   list,  then  press   r  OPTIONS  and
select  the   list   you   need  with   Select  list.
•   A   channel  could   be  hidden   in   the   Channel   list.  Read  more
about   Channel   list   in   Help > Basics  > Watch  TV  > Channel  list .
No  digital   channel  found  during  installation
•   Check   if  the   TV   supports  DVB-T...

6.4Picture and sound
No  picture
•   Check   if  the   antenna  is  connected   properly.
•   Check   if  the   correct   device   is  selected  and  connected   properly.
•   Check   the   contrast   or  brightness   setting  in   h > Setup  > TV
settings  > Picture  > Contrast   or Brightness .
The   picture  is   poor
•   Bad   weather  can   influence   the   picture   quality.
•   Check   if  the   antenna  is  connected   properly.
•   Non -earthed   audio   devices,   neon   lights,   high...

6.5Devices
HDMI  connections
•   The  HDMI -HDCP  procedure  might  take  a  few  seconds   before
the   picture   from  a  device   appears.
•   If   the   TV   does  not   recognise   the   device   and  there  is  no
picture,   try   switching   from  one  device   to  another  and  back   again
to  restart  the   HDCP  procedure.   Or   switch   the   device   off   and
back   on   again.
•   If   sound   interruptions   occur  persistently,   see  the   user  manual   of
the   device   to  check...