Philips 21 9 Manual

3.4Pause TV and recording
Smart  USB recording
With   this   TV   you   can   pause   a  TV   broadcast   from  a  digital
channel.   You   can   pause   a  TV   broadcast   to  watch   it   later.
Simply  connect   a  USB   Hard  Drive   device   to  your   TV   and  you
can   pause   the   broadcast.
If   your   TV   is  connected   to  the   Internet,   you   can   also  record   or
set   a  programmed  recording   of   a  digital   broadcast.  In   some
countries,  recording   is  not   supported....

Specifics
The  Audio  Description  audio   (commentary)   for   the   visually
impaired  is  not   available   for   playback  in   Smart  USB   Recording.
Recording
If   the   TV   is  connected   to  the   Internet  and  there  is  a Recordings
button  on   the   Programme   guide  page,   you   can   record   a  digital
TV   broadcast   on   the   USB   Hard  Drive.
You   can   manage   all   recordings  in   the   Programme  guide  on   TV.
If   the   Recordings   button  is  not   available,  check...

3.5Games
Play a game
Add   a  game  console
In   the   Home  menu,  start   Add   your   devices  to  add   the   console
to  the   Home  menu   for   easy   selection  later  on.  When   adding  a
game  console   to  the   Home  menu,  select  Game  when   the   TV
asks   for   the   device   type.  If   your   game  console  is  an   EasyLink
HDMI -CEC  device   it   might  add   itself  to  the   Home  menu.
Smart   setting   -  Game
The  Smart  picture   setting  Game  sets   the   TV   to  the...

3.6Text
Text pages
Open  Text
To   access   Text   while   you   are   watching   TV   channels,  press
TEXT .
To   close  Text,   press   TEXT  again.
Select  a  Text   page
To   select  a  page  …
•   Enter  the   page  number  with   the   number  keys.
•   Press   W  or  X
•   Press   u  or  v.
•   Press   a  colour  key  to  select  a  colour-coded   subject  at  the
bottom  of   the   screen.
Text   sub -pages
A   Text   page  number  can   hold  several   subpages.  The  subpage
numbers  are...

Text   language
Some   digital   TV   broadcasters  have   several  Text  languages
available.
To   set   your   primary  and  secondary  Text   language,  press   h >
Set   up > Channel  settings   and  select Primary  or Secondary  Text
and  select  your   preferred   Text   languages.
Text   2.5
If   available,  Text   2.5  offers  more   colours  and  better  graphics.  Text
2.5  is  activated   as   a  standard   factory   setting.
To   switch   it   off,  select  h > Setup  > TV  settings  >...

4
4.1
Setup
Picture and sound
Picture
In   the   Picture   menu,  you   can   adjust   all   picture   settings
individually.
To   open   the  Picture   settings ,  press  h > Setup  > TV  settings  >
Picture .
•   Contrast
Sets   the   contrast   level  of   the   picture.
•   Brightness
Sets   the   brightness   level  of   the   picture.
•   Colour
Sets   the   level  of   colour  saturation.
•   Hue
If   NTSC   is  broadcast,  hue   compensates   the   colour  variations.
•   Sharpness
Sets   the...

Reset   a  Smart   setting
To  reset   a  Smart  setting  to  its  original   values,  select  the   Smart
setting  you   want   to  reset   in   the   ADJUST   menu.  Then   press   h
>  Setup  > TV  settings  > Picture,  select Reset,  press   OK and
confirm.
Read  more   about   using  Smart  picture   and  sound   settings   in   Help
>  Basics  > Watch  TV  > Smart   picture  and  sound   settings .
ISF  Calibration
Get   the   most  out   of   your   HD   TV   display   with   ISF  Calibration.
An...

4.2Ambilight
Placement
For  the   best  Ambilight  effect   :
•   Dim   the   lighting   conditions   in   the   room  and  position   the   TV
up  to  25  cm  away  from  the   wall.
•   Adjust  Ambilight  according  to  the   colour  of   your   wall  at  home
in   the   Wall   colour  setting.
•   To   prevent   poor   infrared  remote   control   reception,   position
your   devices  out   of   sight  of   Ambilight.
Adjust
To   open   the   Adjust  menu,  press   t  ADJUST .
To   close,   press   t...

You   can   also  set   up  the   colour  scheme  in   the   Setup   menu.
With   the   TV   switched   on,  press  h  and  select  Setup.  Select   TV
settings  > Ambilight  > Lounge   light   mood .  Select   the   colour
scheme  with   which  Lounge   light   will   start   up.
Setup   /   Ambilight39 

4.3Channels
Reorder and rename
You   can   reorder   and  rename  channels   in   the   Channel   list.
To   reorder   or  rename  a  channel,   read  Help > Basics  > Watch
TV  > Channel  list .
Update channels
The  TV   puts  all   installed   channels   in   the   Channel   list.  If   you
receive   digital   channels,  you   can   set   the   TV   to  automatically
update   the   list   with   new   channels.  You   can   also  start   an   update
of   the   Channel   list   yourself.
Automatic...