Philips 200wp7e User Manual

Installing Your LCD Monitor 
   
        
 
 •  Front View Produt Description
 • Setting Up and Connecting 
Your Monitor
 • 
The Base
 • Getting Started 
 • Optimizing Performance
Installing Your LCD Monitor
Front View Product Description
 
1To switch monitors power On and Off
2
To access OSD menu
3
  To adjust the OSD
4
To adjust brightness of the display
5
  To adjust the OSD
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/install.htm (1\
 of 3)2006-08-04 11:01:41 AM 

Installing Your LCD Monitor 
 
6AUTO Automatically adjust the horizontal position, vertical 
position, phase and clock setting
RETURN TO TOP OF THE PAGE
Rear View
1 AC power input
2 DVI-D input
3 D-sub
4 Kensington anti-thief lock
5 USB upstream and downstream
 
RETURN TO TOP OF THE PAGE 
    
 
   
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/install.htm (2\
 of 3)2006-08-04 11:01:41 AM 

Installing Your LCD Monitor 
Optimizing Performance 
l     For best performance, ensure that your display settings are set at 1680 \
x 1050 @60Hz
Note: You can check the current display settings by pressing the OK button \
once. Go into the Product Information. The current display mode is shown\
 on 
the item called RESOLUTION.
l     You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the 
best performance out of your monitor. This is included on this CD. Step-\...

Setting up and Connecting Your Monitor
   
        
 
  Your LCD Monitor :
 
• Front View Product 
Description
 • Accessory Pack
 • Setting Up and Connecting 
Your Monitor
 • Getting Started 
 • Optimizing Performance
 • The Base
  
   
   
   
   
   
 
Setting Up and Connecting Your Monitor
Accessory Pack
Unpack all the parts. 
 
Power cord VGA cable DVI cable
 
USB cable  EDFU pack 
 
  
RETURN TO TOP OF THE PAGE 
Connect to PC
Connect the power cord and DVI cable to the back of the monitor firmly. \...

Setting up and Connecting Your Monitor
Connect the cables to the back of your computer by following these steps\
:(a) Turn off your computer and unplug its power cord.
(b) Connect the monitor signal cable to the video connector on the back of y\
our computer.
(c) Plug the power cord on your computer and your monitor into a nearby outl\
et.
(d) USB plug
(1) Connect USB upstream port on monitor and the USB port on PC with a USB c\
able.
(2) The USB downstream port is now ready for any USB device to plug...

The Base
   
        
 
 
Your LCD Monitor :
 • Front View Product 
Description
 • Accessory Pack
 • Setting up and connecting 
your monitor
 • Getting Started 
 • Optimizing Performance
  
The Base
1) Place the monitor face down on a smooth surface taking care to avoid sc\
ratching or damaging the 
screen.  
  
 
Do not release the pin 
before the base stand is 
firmly fixed to the base 
column.
 
 
 
 
 
 
 
2) Hold the monitor base with both hands and firmly fix the base plate int\
o four-pronged...

The Base
 
 
 
 
 
 
3)Fastening base stand with the monitor.  
 
    
 
   
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/base.htm (2 of\
 5)2006-08-04 11:01:54 AM 

The Base
 
VESA Standard Mounting 
1) Place monitor face down on a smooth surface.  
 
 
 
2) Unscrew the 4 screws at the base. 
 
 
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/base.htm (3 of\
 5)2006-08-04 11:01:54 AM 

The Base
3) VESA mounting holes  
 
 
 
4) Install the wall mount
 
RETURN TO TOP OF THE PAGE 
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/base.htm (4 of\
 5)2006-08-04 11:01:54 AM 

The Base
  
        
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/INSTALL/base.htm (5 of\
 5)2006-08-04 11:01:54 AM