Philips 191v2ab User Manual

							EN User manual  1
  Customer care and warranty  27
 
  Troubleshooting & FAQs  39
191V2
www.philips.com/welcome
 
						

							Table of Contents
1 Important
1.1  Safety precautions and maintenance  ...............  1
1.2  Notational Descriptions  ......................................... 2
1.3  Disposal of product and packing material .... 3
2  Setting up the monitor
2.1  Installation  .......................................................................  4
2.2  Operating the monitor  ...........................................  5
2.3  Remove Base Stand and Base  .............................  7
3  Product information
3.1  Smar tContrast  ............................................................. 7
3.2  Smar tControl Lite  ...................................................... 8
3.3  Philips Pixel Defect Policy  ......................................15
4  Technical Specifications  .................................17
4.1  Resolution & Preset Modes ..................................20
4.2  Automatic PowerSaving  ..........................................20
5  Regulatory Information  ................................. 21
6  Customer care and warranty  ......................27
7  Troubleshooting & FAQs
7.1  Troubleshooting  .......................................................... 39
7.2  Smar tControl Lite FAQs  ........................................41
7.3  General FAQs  .............................................................. 43
2010 © Koninklijke Philips Electronics N.V.  All rights reser ved.  
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke 
Philips Electronics N.V. and are used under license from Koninklijke Philips 
Elecr tonics N.V.
Specifications are subject to change without notice.
 
						

							1
This electronic user’s guide is intended for anyone 
who uses the Philips monitor. Take time to read 
this user manual before you use your monitor. 
It contains impor tant information and notes 
regarding operating your monitor.
The Philips guarantee applies provided the 
product is handled properly for its intended use, 
in accordance with its operating instructions and 
upon presentation of the original invoice or cash 
receipt, indicating the date of purchase, dealer’s 
name and model and production number of the 
product.
1.1 
Safety precautions and maintenance
 Warnings
Use of controls, adjustments or procedures other 
than those specified in this documentation may 
result in exposure to shock, electrical hazards 
and/or mechanical hazards.
Read and follow these instructions when 
connecting and using your computer monitor.
Operation
•	 Keep	the	monitor	out	of	direct	sunlight	and		
  away from stoves or any other heat source.
•	 Remove	any	object	that	could	fall	into		
  ventilation holes or prevent proper cooling  
  of the monitor’s electronics. 
•	 Do	not	block	the	ventilation	holes	on	the		
  cabinet.
•	 When	positioning	the	monitor, 	make		
  sure the power plug and outlet are easily  
  accessible.
•	 If	turning	off	the	monitor	by	detaching	the		
  power cable or DC power cord, wait for 6  
  seconds before attaching the power cable or  
  DC power cord for normal operation.
•	 Please	use	approved	power	cord	provided	
  by Philips all the time. If your power cord  
  is missing, please contact with your local  
  ser vice center. (Please refer to Customer  
  Care Consumer Information Center)
1. Important
•	 Do	not	subject	the	monitor	to	severe		
 vibration or high impact conditions during  
  operation.
•	 Do	not	knock	 or	drop	the	monitor	during		
  operation or transpor tation.
Maintenance
•	 To	protect	your	monitor	from	possible		
  damage, do not put excessive pressure on  
	 the	LCD	panel. 	When	moving	your	monitor, 		
  grasp the frame to lift; do not lift the 
  monitor by placing your hand or fingers on  
  the LCD panel.
•	 Unplug	the	monitor	if	you	are	not	going	to		
  use it for an extensive period of time.
•	 Unplug	the	monitor	if	you	need	to	clean	it		
  with a slightly damp cloth. The screen may  
  be wiped with a dr y cloth when the power is 
  off. However, never use organic solvent, such  
  as, alcohol, or ammonia-based liquids to  
  clean your monitor.
•	 To	avoid	the	risk	of	shock	or	permanent		
  damage to the set, do not expose the  
  monitor to dust, rain, water, or excessive  
  moisture environment.
•	 If	your	monitor	gets	wet, 	wipe	it	with	dr y		
  cloth as soon as possible. 
•	 If	foreign	substance	or	water	gets	in	your	
  monitor, please turn the power off  
  immediately and disconnect the power cord.  
  Then, remove the foreign substance or  
  water, and send it to the maintenance center.
•	 Do	not	store	or	use	the	monitor	in		
  locations exposed to heat, direct sunlight or  
  extreme cold.
•	 In	order	to	maintain	the	best	performance		
  of your monitor and use it for a longer  
  lifetime, please use the monitor in a location  
  that falls within the following temperature  
  and humidity ranges. 
  
o  Temperature: 0-40°C 32-95°F
  o  Humidity: 20-80% RH
 
						

							2
•	 IMPORTANT:
	Always	activate	a	moving		
  screen saver program when you leave your  
  monitor unattended. Always activate a  
  periodic screen refresh application if your  
  monitor will display unchanging static  
  content. Uninterrupted display of still or  
  static images over an extended period may 
  cause “burn in”, also known as “after-imaging” 
  or “ghost imaging”,  on your screen. 
  "Burn-in", "after-imaging", or "ghost imaging" is a  
  well-known phenomenon in LCD panel  
  technology. In most cases, the “burned  
  in” or “after-imaging” or “ghost imaging” will  
  disappear gradually over a period of time  
  after the power has been switched off. 
 Warning
Severe” burn-in” or “after-image” or “ghost image” 
symptoms will not disappear and cannot be 
repaired. The damage mentioned above is not 
covered under your warranty.
Service
•	 The	casing	cover	should	be	opened	only	by		
  qualified ser vice personnel.
•	 If	there	is	any	need	for	any	document	for		
  repair or integration, please contact with  
  your local ser vice center. (please refer to the  
  chapter of "Consumer Information Center") 
•	 For	transpor tation	information, 	please	refer		
  to "Technical Specifications". 
•	 Do	not	leave	your	monitor	in	a	car/trunk		
  under direct sun light.
 Note
Consult a ser vice technician if the monitor does 
not operate normally, or you are not sure what 
procedure to take when the operating instructions 
given in this manual have been followed.
1.2  Notational Descriptions
The following subsections describe notational 
conventions used in this document. 
Notes, 	Cautions	and	 Warnings
Throughout this guide, blocks of text may be 
accompanied by an icon and printed in bold or 
italic type. These blocks contain notes, cautions or 
warnings. They are used as follows:
  Note
This icon indicates impor tant information and tips 
that help you make better use of your computer 
system.
  Caution
This icon indicates information that tells you how 
to avoid either potential damage to hardware or 
loss of data.
  Warning
This icon indicates the potential for bodily harm 
and tells you how to avoid the problem.
Some warnings may appear in alternate formats 
and may not be accompanied by an icon. In such 
cases, the specific presentation of the warning is 
mandated by the relevant regulator y authority.
 
						

							3
1.3 
Disposal of product and packing  
  material
Waste Electrical and Electronic Equipment-
WEEE
This marking on the product or on its packaging 
illustrates that, under European Directive 2002/96/
EC governing used electrical and electronic 
appliances, this product may not be disposed 
of with normal household waste. You are 
responsible for disposal of this equipment through 
a designated waste electrical and electronic 
equipment collection. To determine the locations 
for dropping off such waste electrical and 
electronic, contact your local government office, 
the waste disposal organization that ser ves your 
household or the store at which you purchased 
the product.
Your new monitor contains materials that can be 
recycled and reused. Specialized companies can 
recycle your product to increase the amount of 
reusable materials and to minimize the amount to 
be disposed of. 
All redundant packing material has been omitted. 
We	have	done	our	utmost	to	make	the	packaging	
easily separable into mono materials.
Please find out about the local regulations on how 
to dispose of your old monitor and packing from 
your sales representative. 
Recycling Information for Customers
There is currently a system of recycling up and 
running in the European countries, such as The 
Netherlands, Belgium, Norway, Sweden and 
Denmark.
In Asia Pacific, Taiwan, the products can be taken 
back by Environment Protection Administration 
(EPA) to follow the IT product recycling 
management process, detail can be found in web 
site www.epa.gov.tw
The monitor contains par ts that could cause 
damage to the nature environment. Therefore, it is 
vital that the monitor is recycled at the end of its 
life cycle. 
For help and ser vice, please contact Consumers 
Information Center or F1rst Choice Contact 
Information Center in each countr y. 
 
						

							4
2.1 
Installation
191V2
  Package contents
2. Setting up the monitor
  Install base stand
191V2
1.  Place the monitor face down a smooth  
  surface taking care to avoid scratching or  
  damaging the screen.
2.  Hold the monitor base stand with both  
  hands and firmly inser t the base stand into  
  the base column.
 Connecting to your PC
 
 
  AC power input
 
  VGA input
 
  PC Audio input(Available for selected models)
  Kensington anti-thief lock
             
D VI-D input(Available for selected models)
Connect to PC
  1 .   Connect the power cord to the back of  
      the monitor firmly.
  2 .   Turn off your computer and unplug its  
      power cable.
  3.   Connect the monitor signal cable to the   
      video connector on the back of your  
      computer.
  4 .   Plug the power cord of your computer  
      and your monitor into a nearby outlet.
  5 .   Turn on your computer and monitor.  
      If the monitor displays an image,   
      installation is complete.
2.2  Operating the monitor
Guide de  démarrage  r a pid e / Guía rápida / Kur zanleitung / 
Guida rapida /  快速入门指南 / 
Краткое руководство  по запуск у
H
�z l� ba şlangi ç k� lavuzu  / 安装Kurulum连接性人体工程学调整
 Monitor LCD / Monitor LCD / LCD-Monitor /  Moniteur LCD /
LCD Monitor / LCD监视器  / LCD-мониторомLCD Monitor19 1V
M2191VE1TQ70G19C1-813-2A
19
1V191V
Monitor
Quick start guide
EDFU CD
P o w er cor d V
GA signal cable 
Aud io  cab
le (
o pti onal) DVI
 cable (opti oon al)
CLICK!
CLICK!
191V
 
						

							5
 Front view product description
   : To switch monitor’s power ON and OFF
  : To access the OSD menu
   : To adjust brightness of the display
   :Auto picure control switching in wide 
and 4:3 format 
    : Automatically adjust the horizontal 
position, ver tical position, phase and clock settings./
Return to previous OSD level.
  Description of the On Screen Display
What is On-Screen Display (OSD)?
On-Screen Display (OSD) is a feature in all Philips 
LCD monitors. It allows an end user to adjust 
screen performance or select functions of the 
monitors directly through an on-screen instruction 
window. A user friendly on screen display interface 
is shown as below:
Basic and simple instruction on the control keys
In the OSD shown above users can press 
 
buttons at the front bezel of the monitor to move 
the cursor,  OK to confirm the choice or change. The OSD Menu
Below is an overall view of the structure of the 
On-Screen Display. You can use this as a reference 
when you want to work your way around the 
different adjustments later on.
Main menu
Input Sub menu
VGA
DVI (available for selective models)
Picture Picture Format 
- 4:3, Wide screen
Brightness
Contrast
Color Color Temp. 
-  5000K, 6500K, 7500K, 8200K, 9300K, 11500K
sRGB
Language English, Español, Fran
çais, Deutsch, Italiano
Portugu ês, PycckИЙ, 簡體中文
User Define      Red
 
    Green
      Blue
SmartContrast 
-  On, Off
OSD Settings Horizontal
Vertical
Transparency 
-  Off, 1, 2, 3, 4
OSD Time out  -  5, 10, 20, 30, 60
Gamma 
-  1.8, 2.0, 2.2, 2.4, 2.6
Setup Power LED 
-  0, 1, 2, 3, 4
H. Position  -  0 ~ 100
Resolution Notification   -  On, Off
Reset  -  Yes, No
V. Position 
-  0 ~ 100
Information Phase  -  0 ~ 100
Clock  -  0 ~ 100
 Resolution notification
This monitor is designed for optimal performance 
at its native resolution, 1366×768@60Hz. 
When	the	monitor	is	powered	on	at	a	different	
resolution, an aler t is displayed on screen: Use 
1366×768@60Hz for best results.
Display of the native resolution aler t can be  
switched off from Setup in the OSD (On Screen 
Display) menu.
 
 
						

							6
 Physical Function
 
Tilt
2.3  Remove Base Stand and Base
 
  Remove the Base Stand
191V2
Place the monitor face on a safe surface, pull the 
base stand away from the monitor.
 
  Remove the Base
Condition:
•  
For VESA standard mounting applications
1.  Separate the base from the base stand.
191V
(191V2) Note
This monitor accepts a 100mm x 100mm  
VESA-Compliant mounting interface.  
100mm
100mm
 
						

							7
3.1 
SmartContrast
 What is it? 
Unique technology that dynamically analyzes 
displayed content and automatically optimizes 
a LCD monitor's contrast ratio for maximum 
visual clarity and viewing enjoyment, stepping up 
backlighting for clearer, crisper and brighter images 
or dimming backlighting for clear display of images 
on dark backgrounds. 
  Why do I need it? 
You want the ver y best visual clarity and viewing 
comfor t for ever y type of content. Smar tContrast 
dynamically controls contrast and adjusts 
backlighting for clear, crisp, bright gaming and 
video images or displays clear, readable text for 
office work. By reducing your monitor's power 
consumption, you save on energy costs and 
extend the lifetime of your monitor. 
  How does it work? 
When	you	activate	Smar tContrast, 	it	will	analyse	
the content you are displaying in real time to 
adjust colors and control backlight intensity. This 
function will dynamically enhance contrast for a 
great enter tainment experience when viewing 
videos or playing games.
3.  Product information
 
						

							8
First launch -Wizard
•  The f irst  time after installation  of  
  Smar tControl  Lite , it will automaticall y  
  go to  Wizard f or first  time launch.  
•  The wizard will  guide you through  
  adjustment  your  monitor perf ormance  step  
  by step . 
•  You can go to  Plug-in menu to launch wizard  
  later on as w ell. 
•  You can adjust  more options without wizard  
  by Standard pa ne.3.2  Philips Smar tControl Lite
The new Smar tControl Lite software b y Phillips 
allo ws you  to control y our monitor via an easy 
to use on-screen gr aphic interface .  Complicated 
adjustments are a thing of the past as this user 
fr iendl y software guides y ou through 
f ine-tuning resolution,  Color calibration, 
Clock/Phase adjustments,  RGB White point 
adjustment,  etc.  
Equipped with latest technology in core algor ithm 
f or fast processing and response , this  Windo ws 
7 compliant ey e catching animated Icon based 
software is ready to enhance y our exper ience 
with Philips monitor s!
 Installation
•  Follo w the instr uction and complete  the  
  installation.  
•  You can launch after installation is  completed. 
•  If you want to  launch later , y ou  can either  
  click the shor tcut on desktop or  toolbar.