Philips 191v2ab User Manual
Have a look at the manual Philips 191v2ab User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Consumer Information Centers Argentina / Australia / Brasil / Canada / New Zealand / Belarus / Bulgaria / Croatia / Czech Republic / Estonia / United Arab Emirates / Hong Kong / Hungar y / India / Indonesia / Israel / Latvia / Lithuania / Malaysia / Middle East + Nor th Africa / New Zealand / Pakistan / Romania / Russia / Serbia & Montenegro / Singapore / Slovakia / Slovenia / South Africa / South Korea / Taiwan / Philippines / Thailand / Turkey / Ukraine / Vietnam Eastern Europe BELARUS Technic al Center of JV IBA M. Bogdanovich str. 155 BY - 220040 Minsk Tel: +375 17 217 33 86 BELARUS Ser vice.BY Petrus Brovky st. 19 – 101-B 220072, Minsk Belarus BULGARIA LAN Ser vice 140, Mimi Balkanska Str. Office center Translog 1540 Sofia, Bulgaria Tel: +359 2 960 2360 www.lan-ser vice.bg CZECH REPUBLIC General Consumer Information Center 800 142100 Xpectrum Lu.ná 591/4 CZ - 160 00 Praha 6 Tel: 800 100 697 or 220 121 435 Email:[email protected] www.xpectrum.cz CROATIA Renoprom d.o.o. Ljubljanska 4, Sv. Nedjelja,10431 Croatia Tel: +385 1 333 0974 ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE-12618 Tallinn Tel: +372 6519900 www.ee.invia.fujitsu.com HUNGARY Serware Szer viz Vizimolnár u. 2-4 HU - 1031 Budapest Tel: +36 1 2426331 Email: [email protected] www.serware.hu HUNGARY Profi Ser vice Center Ltd. 123 Kulso-Vaci Street, H-1044 Budapest ( Europe Center ) Hungar y Tel: +36 1 814 8080 [email protected] LATVIA Ser viceNet LV Jelgavas iela 36 LV - 1055 Riga, Tel: +371 7460399 Email: ser viss@ser vicenet.lv LITHUANIA Ser viceNet LT Gaiziunu G. 3 LT - 3009 KAUNAS Tel: +370 7400088 Email: ser visas@ser vicenet.lt www.ser vicenet.lt
32 ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel: +40 21 2101969 SERBIA & MONTENEGRO Kim Tec d.o.o. Viline vode bb, Slobodna zona Beograd L12/3 11000 Belgrade Serbia Tel. +381 11 20 70 684 SLOVAKIA General Consumer Information Center 0800004551 Datalan Ser visne Stredisko Puchovska 8 SK - 831 06 Bratislava Tel: +421 2 49207155 Email: ser [email protected] SLOVENIA PC HAND Brezovce 10 SI - 1236 Trzin Tel: +386 1 530 08 24 Email: ser [email protected] RUSSIA CPS 18, Shelepihinskaya nab. 123290 Moscow Russia Tel. +7(495)797 3434 Profservice: 14A -3, 2Karacharovskaya str, 109202, Moscow , Russia Tel. +7(095)170-5401 TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.com LLC Topaz Company Topaz-Ser vice Company, Mishina str. 3, Kiev Ukraine-03151 Tel: +38 044 245 73 31 Latin America ARGENTINA Azopardo 1480. (C1107ADZ) Cdad. de Buenos Aires Tel: 0800 3330 856 Email: CIC [email protected] BRASIL Alameda Raja Gabaglia, 188 - 10°Andar - V. Olímpia - S. Paulo/SP - CEP 04551-090 - Brasil Tel: 0800-7254101 Email: CIC [email protected] Pacific AUSTRALIA Company: AGOS NETWORK PTY LTD Address: 4/5 Dursley Road, Yenorra, NSW 2161, Australia Tel: 1300 360 386 Fax: +61-2-80808147 Email: [email protected] Ser vice hours: Mon.~Fri. 8:00am-7:30pm
33 NEW ZEALAND Company: Visual Group Ltd. Address: 28 Walls Rd Penrose Auckland Phone: 0800 657447 Fax: 09 5809607 E-mail: [email protected] Ser vice Hours: Mon.~Fri. 8:30am~5:30pm Asia HONG KONG/Macau Company Name: PHK Ser vice Limited Address: Flat A, 10/F., Pak Sun Building, 103 - 107 Wo Yi Hop Road, Kwai Chung, New Territories, Hong Kong Tel.: (852) 2610-6908 / (852) 2610-6929 for Hong Kong and (853) 2856-2277 for Macau Fax: (852) 2485 3574 for Hong Kong and (853) 2856 1498 for Macau E-mail: enquir y@phkser vice.com.hk Ser vice Hours: Mon.~Sat. 09:00am~06:00pm India Company: REDINGTON INDIA LTD Address: SPL Guindy House, 95 Mount Road, Chennai 600032, India Tel: +9144-42243352/353 E-mail: [email protected] Ser vice hours: Mon.~Fri. 9:00AM~5:30PM; Sat. 9:00AM~1:00PM Indonesia Company Name: PT. Gadingsari elektronika Prima Address: Kompleks Pinang 8, Jl. Ciputat raya No. 8F, Pondok Pinang. Jakar ta Tel: 021-750909053, 021-750909056 Fax: 021-7510982 E-mail: [email protected] Ser vice hours: Mon.~Fri. 8:30am~4:30pm; Sat. 8:30am~2:00pm Additional service points: 1. Philips Building Jl. Buncit Raya Kav 99. Jakar ta Selatan. Phone: 021-7940040, ext 1722/1724, 98249295, 70980942 2. Jl. Tanah Abang 1 no 12S. Jakar ta Pusat. Phone: 021-3455150, 34835453 3. Rukan City Home no H31, Gading Square. Jl. Bulevar Barat. Kelapa Gading. Jakar ta Utara. Phone: 021-45870601, 98131424 South Korea Company: PCS One Korea Ltd. Address: 112-2, Banpo-dong, Seocho-ku, Seoul, 137-040, Korea Call Center Tel: 080-600-6600 Tel: 82 2 591 1528 Fax: 82 2 595 9688 E-mail: [email protected] Ser vice hours: Mon.~Fri. 9:00AM~ 6:00PM; Sat. 9:00AM~1:00PM Malaysia Company: After Market Solutions (CE) Sdn Bhd Address: Lot 6. Jalan 225/51A, 46100 Petaling Jaya, Selangor DE, Malaysia. Phone: 603 7953 3370 Philips Info Line: 1-800-880-180 Fax: 603 7953 3338 E-mail: [email protected] Ser vice Hours: Mon.~Fri. 8:15am~5:15pm; Sat. 9:00am~1:00pm Pakistan Philips Consumer Ser vice Address: Mubarak manzil, 39, Garden Road, Saddar, Karachi-74400 Tel: (9221) 2737411-16 Fax: (9221) 2721167 E-mail: [email protected] Website: www.philips.com.p
34 Singapore Company: Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) Address: 620A Lorong 1 Toa Payoh, TP4 Building Level 1, Singapore 319762 Tel: (65) 6882 3999 Fax: (65) 62508037 E-mail: [email protected] Ser vice hours: Mon.~Fri. 9:00am~6:00pm; Sat. 9:00am~1:00pm Taiwan Company: FETEC .CO Address: 3F, No.6, Lane 205, Sec. 1, Chang Hsing Rd, Lu Chu Hs, Taoyuan, Taiwan R.O.C 33800 Consumer Care: 0800-231-099 Tel: (03)2120336 Fax: (03)3129184 E-mail: [email protected] Ser vice hours: Mon.~Fri. 8:30am~7:00pm Thailand Company: Axis Computer System Co., Ltd. Address: 1421 Soi Lardprao 94, Srivara Town In Town Soi 3 Road, Wangthonglang, Bangkok 10310 Thailand Tel: (662) 934-5498 Fax: (662) 934-5499 E-mail: [email protected] Ser vice Hours: Mon.~Fri. 08:30am~05:30pm Glee Electronics Inc Contact nos. (632) 636-3636 / 7064028 to 29 Fax no. (632) 7064026 Receiving Centers NEO CARE - Megamall 4th Level Cyberzone, Building B, SM Megamall, Mandaluyong City NEO CARE - SM North EDSA 4th Level Cyberzone, Annex Bldg. SM City Nor th EDSA, Quezon City 441-1610 MDR Microware Sales Inc. Cebu Branch N. Escario corner Clavano St., Cebu City Phils. # 255-4415/ 255-3242/253-9361/4124864 to 67 Sun # 0922-8210045 to 46 Davao Office: C . Arellano St., Davao City 8000 082- 225-3021/225-3022 Sun# 0922-8210015 CDO Office: 1445 Corrales Ext.,CDO City 088-856-8540/856-8541 Sun # 0922-8210080 Iloilo Office: C . Lim Comp., Gomez St., Iloilo City # 033 338-4159/ 033 508-3741 Sun # 0922-8808850 Africa SOUTH AFRICA Company name: Sylvara Technologies Pty Ltd Address: Ho Address Palm Springs Centre Christoffel Road Van Riebeeck Park Kempton Park, South Africa Tel: +27878084456 Fax: +2711 391 1060 E-mail: customercare@philipssuppor t.co.za Ser vice hours: Mon.~ Fri. 08:00am~05:00pm Middle East Middle East + North Africa Company: AL SHAHD COMPUTER L.L.C Address: P.O.BOX: 29024, DUBAI, UNITED ARAB EMIRATES TEL: 00971 4 2276525 FAX: 00971 4 2276242 E-mail: [email protected] Ser vice hours: Sat.~Thur. 9:00am~1:00pm & 4:00pm- 8:00pm
39 7.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer ser vice representative. Common Problems No Picture (Power LED not lit) • Make sure the power cord is plugged into the power outlet and into the back of the monitor. • First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position. No Picture (Power LED is Green) • Make sure the computer is turned on. • Make sure the signal cable is properly connected to your computer. • make sure the monitor cable has no bent pins on the connect side. If yes, repair or replace the cable. • The Energy Saving feature may be activated Screen says • Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick Set-Up Guide). • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. AUTO button doesn't function • The auto function is applicable only in VGA- Analog mode. If the result is not satisfactor y, you can do manual adjustments via the OSD menu. Note The Auto Function is not applicable in DVI-Digital mode as it is not necessar y. Visible signs of smoke or sparks • Do not perform any troubleshooting steps • Disconnect the monitor from mains power source immediately for safety • Contact with Philips customer ser vice representative immediately. Imaging Problems Image is not centered • Adjust the image position using the “Auto” function in OSD Main Controls. • Adjust the image position using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. Image vibrates on the screen • Check that the signal cable is properly securely connected to the graphics board or PC . Vertical flicker appears • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the ver tical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. 7 Troubleshooting & FAQs
40 Horizontal flicker appears • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the ver tical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. Image appears blurred, indistinct or too dark • Adjust the contrast and brightness on On-Screen Display. An "after-image", "burn-in" or "ghost image" remains after the power has been turned off. • Uninterrupted display of still or static images over an extended period may cause " burn in", also known as "after-imaging " or "ghost imaging", on your screen. "Burn-in", "after- imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. • Always activate a moving screen saver program when you leave your monitor unattended. • Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. • Severe” burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Image appears distorted. Text is fuzzy or blurred. • Set the PC’s display resolution to the same mode as monitor’s recommended screen native resolution. Green, red, blue, dark, and white dots appears on the screen • The remaining dots are normal characteristic of the liquid cr ystal used in today’s technology, Please refer the pixel policy for more detail. The "power on" light is too strong and is disturbing • You can adjust “power on” light using the power LED Setup in OSD main Controls. Audio problem No sound • Check if audio cable is connected to PC and monitor correctly. • Ensure audio is not muted. Press OSD “Menu”, select “Audio” then “Mute”. Check it on “Off ” position. • Press “Volume” in OSD main control to adjust the volume. For fur ther assistance, refer to the Consumer Information Centers list and contact Philips customer ser vice representative.
41
7.2
SmartControl Lite FAQs
Q1. I change the monitor on a PC to a
different one and the SmartControl
Lite becomes un-usable, what do I
do?
Ans.: Restar t your PC and see if Smar tControl
Lite can work. Otherwise, you will
need to remove and re-install Smar tControl
Lite to ensure proper driver is installed.
Q2. The SmartControl Lite functions
worked well before, but it does not work
anymore, what can I do?
Ans.: If the following actions were executed,
the monitor driver may need to be
re-installed.
• Changed video graphic adapter to another
one
• Updated video driver
• Activities on OS, such as ser vice pack or
patch
• Run Windows Update and updated
monitor and/or video driver
• Windows was booted with the monitor
power off or disconnected.
To find out, please right click My
Computer and click on Proper ties-
>Hardware-> Device Manager.
If you see "Plug and Play Monitor"
shows under Monitor, then you need to
re-install. Simply remove Smar tControl
Lite and re-install it. Q3.
After installing SmartControl Lite,
when clicking on SmartControl Lite
tab, nothing shows up after a while or a
failure message shows, what happened?
Ans.: It might be your graphic adaptor is not
compatible with the Smar tControl
Lite. If your graphic adaptor is one
of the above mentioned brands, tr y to
download the most updated graphic adaptor
driver from corresponding companies’ web
site.
Install the driver. Remove Smar tControl
Lite, and re-install it once more.
If it is still not working, we are sorr y that
the graphic adaptor is not suppor ted. Please
visit Philips website and check if an updated
Smar tControl Lite driver is available.
Q4. When I click on Product Information,
only partial information is shown, what
happened?
Ans.: It might be your graphic card adaptor driver
is not the most updated version which fully
suppor ting DDC/CI interface. Please tr y to
download the most updated graphic
adaptor driver from corresponding
companies’ web site. Install the driver.
Remove Smar tControl Lite and
re-install it once more.
Q5. I forgot my PIN for Theft Deterrence
Function. How can I do?
Ans.: Philips Ser vice center has a right to ask for
legitimate identification and authorization, in
order to establish ownership of the monitor.
42
7.3 General FAQs
Q1: When I install my monitor what should I
do if the screen shows 'Cannot display this
video mode'?
Ans.: Recommended resolution for Philips 18.5":
1366 x 768 @60Hz.
• Unplug all cables, then connect your PC to
the monitor that you used previously.
• In the Windows Star t Menu, select Settings/
Control Panel. In the Control Panel Window,
select the Display icon. Inside the Display
Control Panel, select the 'Settings' tab.
Under the setting tab, in box labeled
'desktop area', move the sidebar to
1366 x 768 pixels (18.5").
• Open 'Advanced Proper ties' and set the
Refresh Rate to 60Hz, then click OK.
• Restar t your computer and repeat step
2 and 3 to verify that your PC is set at
1366 x 768@60Hz (18.5").
• Shut down your computer, disconnect your
old monitor and reconnect your Philips
LCD monitor.
• Turn on your monitor and then turn on
your PC .
Q2: What does the recommended refresh
rate for LCD monitor?
Ans.: Recommended refresh rate in LCD
monitors is 60Hz, In case of any disturbance
on screen, you can set it up to 75Hz to see
if that removes the disturbance. Q3:
What are the .inf and .icm files on the
CD-ROM? How do I install the drivers
(.inf and .icm)?
Ans.: These are the driver files for your monitor.
Follow the instructions in your user manual
to install the drivers. Your computer may
ask you for monitor drivers (.inf and .icm
files) or a driver disk when you first install
your monitor. Follow the instructions to
inser t the ( companion CD-ROM) included
in this package. Monitor drivers (.inf and .icm
files) will be installed automatically.
Q4: How do I adjust the resolution?
Ans.: Your video card/graphic driver and monitor
together determine the available resolutions.
You can select the desired resolution under
Windows
® Control Panel with the "Display
proper ties".
Q5: What if I get lost when I am making
monitor adjustments via OSD?
Ans.: Simply press the OK button, then select
'Reset' to recall all of the original factor y
settings.
Q6: Is the LCD screen resistant to scratches?
Ans.: In general it is recommended that the panel
surface is not subjected to excessive shocks
and is protected from sharp or blunt
objects. When handling the monitor, make
sure that there is no pressure or force
applied to the panel surface side. This may
affect your warranty conditions.
Q7: How should I clean the LCD surface?
Ans.: For normal cleaning, use a clean, soft cloth.
For extensive cleaning, please use isopropyl
alcohol. Do not use other solvents such as
ethyl alcohol, ethanol, acetone, hexane, etc.
43
Q8:
Can I change the color setting of my
monitor?
Ans.: Yes, you can change your color setting
through OSD control as the following
procedures,
• Press "OK" to show the OSD (On Screen
Display) menu
• Press "Down Arrow" to select the option
"Color" then press "OK" to enter color
setting, there are three settings as below.
1. Color Temperature; The six settings
are 5000K, 6500K, 7500K, 8200K, 9300K
and 11500K. With settings in the 5000K
range the panel appears ‘warm,' with a
red-white color tone, while a 11500K
temperature yields ‘cool, blue-white
toning."
2. sRGB; this is a standard setting for
ensuring correct exchange of colors
between different device (e.g. digital
cameras, monitors, printers, scanners,
etc)
3. User Define; the user can choose
his/her preference color setting by
adjusting red, green blue color.
Note:
A measurement of the color of light
radiated by an object while it is being heated.
This measurement is expressed in terms of
absolute scale, (degrees Kelvin). Lower Kevin
temperatures such as 2004K are red; higher
temperatures such as 9300K are blue.
Neutral temperature is white, at 6504K.
Q9: Can the Philips LCD Monitor be mounted
on the wall?
Ans.: Yes. Philips LCD monitors have this optional
feature. Four standard VESA mount holes on
the rear cover allows the user to mount the
Philips monitor on most of the VESA
standard arms or accessories. We
recommend you to contact your Philips
sales representative for more information.
Q10: Can I connect my LCD monitor to any PC,
workstation or Mac?
Ans.: Yes. All Philips LCD monitors are fully
compatible with standard PCs, Macs and
workstations. You may need a cable adapter
to connect the monitor to your Mac
system. Please contact your Philips sales
representative for more information.
Q11: Are Philips LCD monitors
Plug-and- Play?
Ans.: Yes, the monitors are Plug-and-Play
compatible with Windows 7/Vista/XP/NT,
Mac OSX, Linux
Q12: What kind of wide-angle technology
is available?
Ans.: Currently, the IPS type panels offer the
best Contrast Ratio, compared to MVA,
or PVA technologies. TN panels have
improved over the years, but IPS panel still
44
gives superior results over TN panel.
Q13: What is Image Sticking, or Image
Burn-in, or After Image, or Ghost Image in
LCD panels?
Ans.: Uninterrupted display of still or static images
over an extended period may cause
"burn in", also known as "after-imaging" or
"ghost imaging", on your screen. "Burn-in",
"after-imaging", or "ghost imaging" is a
well-known phenomenon in LCD panel
technology. In most cases, the "burned in" or
"atter-imaging" or "ghost imaging" will
disappear gradually over a period of time
after the power has been switched off.
Always activate a moving screen saver
program when you leave your monitor
unattended.
Always activate a periodic screen refresh
application if your LCD monitor will display
unchanging static content.
Warning
Severe"burn-in" or "after-image" or
"ghost image" symptoms will not disappear
and cannot be repaired. The damage
mentioned above is not covered under your
warranty.
Q14: Why is my Display not showing sharp text,
and is displaying jagged characters?
Ans.: Your LCD monitor works best at its native
resolution of 1366 x 768@60Hz. For best
display please use this resolution.