Philips 190sw9f User Manual

							
2T
	SFRVFOUMZ
TLFE
2VFTUJPOT

Q: After I change new PC, I found this information on screen, How can I do\
? 
A: Because you activate Theft Deterrence function in SmartControl II. 
Please contact IT manager or Philips Service Center. 
RETURN TO TOP OF THE PAGE


 

 



j¹
> 
						

							
5SPVCMFTIPPUJOH













• Safety and 
Troubleshooting

• FAQs

• Common Problems

• Imaging Problems


• Regulatory Information

• Other Related Information












Troubleshooting
This page deals with problems that can be corrected by a user. If the pr\
oblem still persists after you have tried these 
solutions, contact Philips customer service representative. 
Common Problems 
Having this problemCheck these items
No Picture
(Power LED not lit)

µ




Make sure the power cord is plugged into the power outlet 
and into the back of the monitor. 
µ




First, ensure that the power button on the front of the monitor 
is in the OFF position, then press it to the ON position.

No Picture
(Power LED is Blue Blinking)

µ




Make sure the computer is turned on.

µ




Make sure the signal cable is properly connected to your 
computer. 
µ




Check to see if the monitor cable has bent pins.

µ




The Energy Saving feature may be activated

Screen says
µ




Make sure the monitor cable is properly connected to your 
computer. (Also refer to the Quick Set-Up Guide). 
µ




Check to see if the monitor cable has bent pins. 
µ




Make sure the computer is turned on.

AUTO button not working properly
µ




The Auto Function is designed for use on standard Macintosh 
or IBM-compatible PCs running Microsoft Windows. 
µ




It may not work properly if using nonstandard PC or video 
card.

Imaging Problems
Display position is incorrect
µ




Press the Auto button. 
µ




Adjust the image position using the Phase/Clock of Setup in 
OSD Main Controls.

 
						

							
5SPVCMFTIPPUJOH


Image vibrates on the screen
µ




Check that the signal cable is properly connected to the 
graphics board or PC.


Vertical flicker appears
µ




Press the Auto button.

µ




Eliminate the vertical bars using the Phase/Clock of Setup in 
OSD Main Controls.


Horizontal flicker appears
µ




Press the Auto button. 
µ




Eliminate the vertical bars using the Phase/Clock of Setup in 
OSD Main Controls.
The screen is too bright or too dark
µ




Adjust the contrast and brightness on On-Screen Display. 
(The backlight of the LCD monitor has a fixed life span. When 
the screen becomes dark or begins to flicker,

please contact 
your sales representative).
An after-image appears
µ




If an image remains on the screen for an extended period of 
time, it may be imprinted in the screen and leave an after-
image. This usually disappears after a few hours
An after-image remains after the power 
has been turned off.
µ




This is characteristic of liquid crystal and is not caused by a 
malfunction or deterioration of the liquid crystal. The after-
image will disappear after a peroid of time.
Green, red, blue, dark, and white dots 
remainsµ




The remaining dots are normal characteristic of the liquid 
crystal used in today’s technology.


Adjust blue power on light
µ




Adjust blue power on light using the power LED of Setup in 
OSD Main Controls.










 

 
						

							
5SPVCMFTIPPUJOH
For further assistance, refer to the Consumer Information Centers list and contact Philips customer service 
representative.


RETURN TO TOP OF THE PAGE




 

 


 
						

							
3FHVMBUPSZ
*OGPSNBUJPO

 



 
 
 

 





•
TCO03 Information

•
Recycling Information for Customers

•Waste Electrical and Electronic 
Equipment-WEEE

•
CE Declaration of Conformity

•Energy Star Declaration


•Federal Communications 
Commission (FCC) Notice (U.S. 
Only)

•
FCC Declaration of Conformity

•Commission Federale de la 
Communication (FCC Declaration)

•EN 55022 Compliance (Czech 
Republic Only)

•
MIC Notice (South Korea Only)

•Polish Center for Testing and 
Certification Notice

•North Europe (Nordic Countries) 
Information

•BSMI Notice (Taiwan Only)
• Ergonomie Hinweis (nur 
Deutschland)

•
Philips End-of-Life Disposal

•
Information for UK only

•China RoHS

•Safety Information 

•Troubleshooting

•Other Related Information

•
Frequently Asked Questions (FAQs)


Regulatory Information
Model ID: 190SW9
Model No: H
WS9190T
TCO03 Information
Congratulations! 
The display you have just purchased carries the TCO03 Displays label. T\
his 
means that your display is designed, manufactured and tested according t\
o some 
of the strictest quality and environmental requirements in the world. Th\
is makes for 
a high performance product, designed with the user in focus that also mi\
nimizes the 
impact on our natural environment.
*available for selective models
Some of the features of the TCO03 Display requirements. 
Ergonomics


µ




Good visual ergonomics and image quality in order to improve the working\
 environment for the user and 
to reduce sight and strain problems. Important parameters are luminance,\
 contrast, resoluction, 
reflectance, colour rendition and image stability.
Energy
µ




Energy-saving mode after a certain time-beneficial both for the user and\
 the environmentµ




Electrical safety
Emissions
µ




Electromagnetic fieldsµ




Noise emissions
Ecology
µ




The product must be prepared for recycling and the manufacturer must hav\
e a certified environmental 
management system such as EMAS or ISO 14 000
µ




Restrictions on
m




chlorinated and brominated flame retardants and polymers m




heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Devel\
opment in co-operation with 
scientists, experts, users as well as manufacturers all over the world. \
Since the end of the 1980s TCO has 
been involved in influencing the development of IT equipment in a more u\
ser-friendly direction. Our labelling 
system started with displays in 1992 and is now requested by users and I\
T-manufacturers all over the world. For more information, please visit 


 
						

							
3FHVMBUPSZ
*OGPSNBUJPO
www.tcodevelopment.com 
RETURN TO TOP OF THE PAGE
Recycling Information for Customers
Philips establishes technically and economically viable objectives to op\
timize the environmental performance of 
the organizations product, service and activities.
From the planning, design and production stages, Philips emphasizes the \
important of making products that 
can easily be recycled. At Philips, end-of-life management primarily ent\
ails participation in national take-back 
initiatives and recycling programs whenever possible, preferably in coop\
eration with competitors.
There is currently a system of recycling up and running in the European \
countries, such as The Netherlands, 
Belgium, Norway, Sweden and Denmark.
In U.S.A., Philips Consumer Electronics North America has contributed fu\
nds for the Electronic Industries 
Alliance (EIA) Electronics Recycling Project and state recycling initi\
atives for end-of-life electronics products 
from household sources. In addition, the Northeast Recycling Council (N\
ERC) - a multi-state non-profit 
organization focused on promoting recycling market development - plans t\
o implement a recycling program.
In Asia Pacific, Taiwan, the products can be taken back by Environment P\
rotection Administration (EPA) to 
follow the IT product recycling management process, detail can be found \
in web site www.epa.gov.tw
The monitor contains parts that could cause damage to the nature environ\
ment. Therefore, it is vital that the monitor is 
recycled at the end of its life cycle. 
For help and service, please contact Consumers Information Center or F1rst Choice Contact Information 
Center in each country or the following team of Environmental specialist can h\
elp. 
Mrs. Argent Chan, Environment Manager 
Philips Consumer Lifestyle 
E-mail: [email protected] 
Tel: +886 (0) 3 222 6795 
Mr. Maarten ten Houten - Senior Environmental Consultant 
Philips Consumer Electronics 
E-mail: [email protected] 
Tel: +31 (0) 40 27 33402
Mr. Delmer F. Teglas 
Philips Consumer Electronics North America 
E-mail: [email protected] 
Tel: +1 865 521 4322


RETURN TO TOP OF THE PAGE
Waste Electrical and Electronic Equipment-WEEE
Attention users in European Union private households


 
						

							
3FHVMBUPSZ
*OGPSNBUJPO
 This marking on the product or on its packaging illustrates that, under\
 European Directive 
2002/96/EG governing used electrical and electronic appliances, this pro\
duct may not be disposed of with 
normal household waste. You are responsible for disposal of this equipme\
nt through a designated waste 
electrical and electronic equipment collection. To determine the locatio\
ns for dropping off such waste electrical 
and electronic, contact your local government office, the waste disposal\
 organization that serves your 
household or the store at which you purchased the product.
RETURN TO TOP OF THE PAGE
CE Declaration of Conformity
Philips Consumer Electronics declare under our responsibility that the p\
roduct is in conformity with the following 
standards  
- EN60950-1:2001 (Safety requirement of Information Technology Equipmen\
t)  
- EN55022:1998 (Radio Disturbance requirement of Information Technology\
 Equipment)  
- EN55024:1998 (Immunity requirement of Information Technology Equipmen\
t)  
- EN61000-3-2:2000 (Limits for Harmonic Current Emission)  
- EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker) 
following provisions of directives applicable 
- 73/23/EEC (Low Voltage Directive)  
- 89/336/EEC (EMC Directive)  
- 93/68/EEC (Amendment of EMC and Low Voltage Directive)  
and is produced by a manufacturing organization on ISO9000 level. 
The product also comply with the following standards  
- ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for CRT Monito\
r)  
- ISO13406-2 (Ergonomic requirement for Flat Panel Display)  
- GS EK1-2000 (GS specification)  
- prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual\
 Display)  
- MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields\
)  
- TCO99, TCO03 (Requirement for Environment Labelling of Ergonomics, \
Energy, Ecology and Emission, 
TCO: Swedish Confederation of Professional Employees) for TCO versions \


RETURN TO TOP OF THE PAGE


Energy Star Declaration
This monitor is equipped with a function for saving energy which support\
s the VESA Display 
Power Management Signaling (DPMS)

 standard. This means that the monitor must be 
connected to a computer which supports VESA DPMS. Time settings are adju\
sted from the 
system unit by software.

VESA State LED Indicator Power Consumption
Normal operation ON (Active)  Blue < 36W (typ.)


 
						

							
3FHVMBUPSZ
*OGPSNBUJPO
Power Saving
Alternative 2
One stepSleep
Blue (blinking) < 0.8 W (typ.)
Switch Off Off < 0.8 W (typ.)
As an ENERGY STAR® Partner, PHILIPS has determined that this product meets 
the 
ENERGY STAR®
guidelines for energy efficiency.
We recommend you switch off the monitor when it is not in use for a long\
 time.




RETURN TO TOP OF THE PAGE
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a\
 Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed \
to provide 
reasonable protection against harmful interference in a residential inst\
allation. This 
equipment generates, uses and can radiate radio frequency energy and, if\
 not installed and 
used in accordance with the instructions, may cause harmful interference\
 to radio 
communications. However, there is no guarantee that interference will no\
t occur in a 
particular installation. If this equipment does cause harmful interferen\
ce to radio or 
television reception, which can be determined by turning the equipment o\
ff and on, the user 
is encouraged to try to correct the interference by one or more of the f\
ollowing measures:


µ




Reorient or relocate the receiving antenna. µ




Increase the separation between the equipment and receiver. µ




Connect the equipment into an outlet on a circuit different from that to\
 which the receiver is connected. µ




Consult the dealer or an experienced radio/TV technician for help. 
Changes or modifications not expressly approved by the party responsible\
 for compliance 
could void the users authority to operate the equipment. 
Use only RF shielded cable that was supplied with the monitor when conne\
cting this monitor to a computer 
device. 
To prevent damage which may result in fire or shock hazard, do not expos\
e this appliance to rain or excessive 
moisture. 
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN IN\
TERFERENCE-
CAUSING EQUIPMENT REGULATIONS.  RETURN TO TOP OF THE PAGE




 
						

							
3FHVMBUPSZ
*OGPSNBUJPO
FCC Declaration of Conformity
Trade Name:  Philips 
Responsible Party:  Philips Consumer Electronics North America  
P.O. Box 671539  
Marietta , GA 30006-0026  
1-888-PHILIPS (744-5477) 
Declaration of Conformity for Products Marked with FCC Logo,  
United States Only 


This device complies with Part 15 of the FCC Rules. Operation is subject\
 to the following two conditions: (1) this device may not 
cause harmful interference, and (2) this device must accept any interf\
erence received, including interference that may cause 
undesired operation. 


RETURN TO TOP OF THE PAGE
Commission Federale de la Communication (FCC Declaration)
Cet équipement a été testé et déclaré conforme auxlimi\
tes des appareils numériques de 
class B,aux termes de larticle 15 Des règles de la FCC. Ces limites \
sont conçues de façon 
à fourir une protection raisonnable contre les interférences nuisi\
bles dans le cadre dune 
installation résidentielle. CET appareil produit, utilise et peut é\
mettre des hyperfréquences 
qui, si lappareil nest pas installé et utilisé selon les consign\
es données, peuvent causer 
des interférences nuisibles aux communications radio. Cependant, rien\
 ne peut garantir 
labsence dinterférences dans le cadre dune installation particuliè\
re. Si cet appareil est la 
cause dinterférences nuisibles pour la réception des signaux de r\
adio ou de télévision, ce 
qui peut être décelé en fermant léquipement, puis en le rem\
ettant en fonction, lutilisateur 
pourrait essayer de corriger la situation en prenant les mesures suivant\
es:


µ




Réorienter ou déplacer lantenne de réception. µ




Augmenter la distance entre léquipement et le récepteur. µ




Brancher léquipement sur un autre circuit que celui utilisé par l\
e récepteur. µ




Demander laide du marchand ou dun technicien chevronné en radio/té\
lévision. 
Toutes modifications nayant pas reçu lapprobation des services comp\
étents en matière de 
conformité est susceptible dinterdire à lutilisateur lusage du \
présent équipement.
Nutiliser que des câbles RF armés pour les connections avec des o\
rdinateurs ou périphériques. 
CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU R\
EGLEMENT 
SUR LE MATERIEL BROUILLEUR DU CANADA. 


 
						

							
3FHVMBUPSZ
*OGPSNBUJPO


RETURN TO TOP OF THE PAGE
EN 55022 Compliance (Czech Republic Only)
RETURN TO TOP OF THE PAGE
MIC Notice (South Korea Only)
Class B Device
Please note that this device has been approved for non-business purposes\
 and may be used in any 
environment, including residential areas.RETURN TO TOP OF THE PAGE


Polish Center for Testing and Certification Notice
The equipment should draw power from a socket with an attached protectio\
n circuit (a three-prong socket). All 
equipment that works together (computer, monitor, printer, and so on) \
should have the same power supply 
source.
The phasing conductor of the rooms electrical installation should have \
a reserve short-circuit protection device 
in the form of a fuse with a nominal value no larger than 16 amperes (A\
).
To completely switch off the equipment, the power supply cable must be r\
emoved from the power supply 
socket, which should be located near the equipment and easily accessible\
.
A protection mark B confirms that the equipment is in compliance with \
the protection usage requirements of 
standards PN-93/T-42107 and PN-89/E-06251.