Home > Sanyo > Phone > Pcs Phone Sanyo Scp 8100 User Guide

Pcs Phone Sanyo Scp 8100 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Pcs Phone Sanyo Scp 8100 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Using One-Touch Speed Dialing
    With this feature, you can dial Speed Dial entries using one key
    press for locations 2-9. (See pages 92-93 for storing a Speed Dial
    number.)
    To use One-Touch Dialing for Speed Dial locations 2-9:
    Press and hold the appropriate key for few seconds.
    The display confirms that the number has been dialed when it
    shows “Connecting...”.
    Section 2: Understanding Your PCS Phone
    2A: Your PCS Phone – The Basics 27
    Four-Digit Dialing
    Enter four digits and press  to display the 4-Digit Dialing
    option. If you select Abbrev. Dial, your phone dials the phone
    number in your Internal Phone Book that ends with the four
    digits you entered. See “Setting Abbreviated Dialing” on page 49.
    To use 4-Digit Dialing:
    1.Dial the last four digits of an Internal Phone Book entry’s
    phone number.
    2.Press  to display the menu options.
    3.Highlight Abbrev. Dialand press  or  .
    Note:4-Digit Dialing dials the first number in your Internal Phone Bookthat matches the four digits.
    Dialing From the Internal Phone Book
    To dial directly from an Internal Phone Book entry:
    1.Press  to access the main menu.
    2.Highlight Phone Bookand press  .
    3.Highlight Find Nameand press  .
    Shortcut:Press the right Navigation key to list entries.
    4.Use your Navigation key to scroll through the Phone Book list
    and highlight one of the appropriate entries and press  .
    5.Highlight the number you wish to call.
    6.Press  (right softkey) for the menu options.
    7.Highlight Calland press  .
    For more options, see “Internal Phone Book Entry Options”
    on page 78.
    Tip:You can also make a call by pressing  (left softkey) during step5 above.
    Call
    Options
    Section 2: Understanding Your PCS Phone
    26 2A: Your PCS Phone – The Basics 
    						
    							Section 2B
    Controlling Your Phone’s
    Settings
    In This Section
    Sound Settings
    Display Settings
    Location Settings
    Airplane Mode
    TTY Access
    Phone Setup Options
    T
    his section describes how you can change your phone’s
    settings to best suit your needs. Take a few moments to review
    these options and add or adjust the settings that are right for you.
    Section 2: Understanding Your PCS Phone
    2B: Controlling Your Phone’s Settings 29 
    						
    							Selecting Ringer Types for Voicemail
    To select a ringer type for voicemail:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Soundsand press  .
    4.Highlight Ringer Typeand press  .
    5.Highlight Voicemailand press  .
    6.Select the menu under Voicemailand press  .
    7.Highlight your desired ringer type and press  .
    Get New:start up a Browser and you can select an item to
    download. (See page 112.)
    Multimedia:to set the ringer downloaded by Multimedia Master
    (see page 107 for downloading).
    Selecting Ringer Types for Messages
    To select a ringer type for messages:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Soundsand press  .
    4.Highlight Ringer Typeand press  .
    5.Highlight Messagingand press  .
    6.Select the menu under Messagingand press  .
    7.Highlight your desired ringer type and press  .
    Get New:start up a Browser and you can select an item to
    download. (See page 112.)
    Multimedia:to set the ringer downloaded by Multimedia Master
    (see page 107 for downloading).
    Section 2: Understanding Your PCS Phone
    2B: Controlling Your Phone’s Settings 31
    Reminder:To access the phone’s main menu, press  from standby
    mode. Menu items may be selected by highlighting them with the
    Navigation key and pressing  .
    Sound Settings
    Ringer Types
    Ringer types help you identify incoming calls and messages. You
    can assign ringer types to individual phone book entries, types
    of calls, and types of messages.
    Preprogrammed Ringersinclude a variety of standard ringer
    types and familiar music.
    Vibrating Ringeralerts you to calls or messages without 
    disturbing others.
    Downloaded Ringers can be downloaded right to your phone.
    (See “Downloading Ringers ” on page 186.)
    Selecting Ringer Types for Voice Calls
    Your PCS Phone provides a variety of ringer options which allow
    you to customize your ring and volume settings.
    To select a ringer type for voice calls so you recognize when a
    certain type of call is coming in by the ringer:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Soundsand press  .
    4.Highlight Ringer Typeand press  .
    5.Highlight Voice Callsand press  .
    6.Select the menu under With Caller ID,No Caller IDor Roaming
    and press  .
    7.Highlight your desired ringer type and press  .
    Get New:start up a Browser and you can select an item to
    download. (See page 112.)
    Multimedia:to set the ringer downloaded by Multimedia Master
    (see page 107 for downloading).
    Section 2: Understanding Your PCS Phone
    30 2B: Controlling Your Phone’s Settings 
    						
    							Setting a Start-up/Power-off Tone 
    1.Follow the steps 1 to 4 above.
    2.Select the menu under Start-up Toneor Power-off Toneand
    press  .
    3.Highlight your desired option and press  .
    Get New:start up a Browser and you can select an item to
    download. (See page 112.)
    Multimedia:to set the ringer downloaded by Multimedia Master
    (see page 107 for downloading).
    Tip:The volume of the Start-up Tone and Power-off Tone can be setthrough the volume setting. See page 34 for instructions.
    Using Voice Prompt 
    This feature allows you to hear voice prompts at Voice Memo,
    Screen Call setting or Voice Dial etc. (Default Setting is On).
    To deactivate this feature:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Soundsand press  .
    4.Highlight Othersand press  .
    5.Select the menu under Voice Promptand press  .
    6.Highlight Offand press  .
    Tip:When ringer volume is set to “Silence All”, voice prompts cannot beheard.
    Section 2: Understanding Your PCS Phone
    2B: Controlling Your Phone’s Settings 33
    Selecting Ringer Types for Calendar
    To select a ringer types for calendar:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Soundsand press  .
    4.Highlight Ringer Typeand press  .
    5.Highlight Calendarand press  .
    6.Select the menu under Calendarand press  .
    7.Highlight your desired type and press  .
    Get New:start up a Browser and you can select an item to
    download. (See page 112.)
    Multimedia:to set the ringer downloaded by Multimedia Master
    (see page 107 for downloading).
    Selecting a Tone Length
    Longer tone lengths may be better for tone recognitions when
    dialing voicemail or other automated systems.
    To select a tone length:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Soundsand press  .
    4.Highlight Othersand press  .
    5.Select the menu under Tone Lengthand press  .
    6.Highlight Shortor Longand press  .
    Section 2: Understanding Your PCS Phone
    32 2B: Controlling Your Phone’s Settings 
    						
    							Alert Notification
    Your phone comes with several different options to keep you
    aware of what’s going on by sounding the alert or ringer.
    Servicesets alert On or Off for network services parameter
    changes.
    Voicemailsets alert to notify you of caller’s message(s).
    Messagingsets alert to notify you of text message(s).
    Minute Beepsets a minute reminder that beeps ten seconds
    before the end of each minute during a call.
    Signal Fadesets alert to notify you when your phone loses a
    signal during a call.
    To set the alerts:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Soundsand press  .
    4.Highlight Alertsand press  .
    5.Highlight your desired option and press  .
    6.If you selected Service,Minute Beepor Signal Fade, select Onor
    Off. If you selected Voicemailor Messaging, select Once,
    Repeat Alertor Off.
    Tip: Repeat Alertsounds every two minutes for twenty minutes.
    Section 2: Understanding Your PCS Phone
    2B: Controlling Your Phone’s Settings 35
    Adjusting the Phone’s Volume Settings
    To adjust the ringer/key volume:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Soundsand press  .
    4.Highlight Ringer/Key Voland press  .
    5.Select the menu you wish to change and press  .
    Ringer Volumefor adjusting Ringer tone volume.
    Start-up/Pw-offfor adjusting Start-up/Power-off tone volume.
    Key Beepfor adjusting Key Beep tone volume.
    6.Adjust the volume level and press  .
    Ringer Offto set the Voice Call ringer volume to off.
    (Only appears in Ringer Volume Setting).
    Silence Allto set all the ringer volume to off. (Only appears in
    Ringer Volume Setting). See “Silence All” on page 36.
    To adjust Earpiece volume:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Soundsand press  .
    4.Highlight Receiver Vol.and press  .
    5.Adjust the volume level and press  .
    Tip:You can adjust the ringer volume in Standby mode by using Volume
    keys, and adjust earpiece volume during a call by using  / of the
    Navigation key or Volume keys.
    Section 2: Understanding Your PCS Phone
    34 2B: Controlling Your Phone’s Settings 
    						
    							Display Settings
    Changing the Greeting
    The greeting can be up to 12 characters and is displayed on the
    first line of your phone’s display screen in Standby mode. You
    may choose to display a custom greeting or you may display your
    PCS User name on the phone’s screen (the default setting).
    To display or change your custom greeting:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Displayand press  .
    4.Highlight Greetingand press  .
    5.Highlight Customand press  .
    You can customize the greeting by entering characters (Press
    to erase single character, press and hold  to erase
    entire entry. See pages 79-83 for the entering method.)
    6.Press  .
    To display your PCS User name as your greeting (the default
    setting):
    1.Follow steps 1 to 4 above.
    2.Highlight Usernameand press  .
    Section 2: Understanding Your PCS Phone
    2B: Controlling Your Phone’s Settings 37
    Silence All
    There may be times when you need to silence your phone
    entirely. The phone’s Silence All option allows you to mute all
    sounds without turning your phone off.
    To activate Silence All:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Soundsand press  .
    4.Highlight Ringer/Key Voland press  .
    5.Highlight Ringer Volumeand press  .
    6.Press  Navigation key until “Silence All” appears on the
    display and press  .
    To deactivate this feature, select a volume level you wish
    during step 6 above.
    Tip:When Ringer Volume is set as Silence All, other items are changedto Off and cannot be highlighted by cursor.
    Section 2: Understanding Your PCS Phone
    36 2B: Controlling Your Phone’s Settings 
    						
    							Changing the Display Screen
    Your new PCS Phone offers animation for what you see on the
    display screen when in Standby mode, Outgoing Calls or Service
    Search.
    To change the Animation:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Displayand press  .
    4.Highlight Animationand press  .
    5.Highlight Standby,Outgoing Calls, or Service Searchand 
    press  .
    Press  (right softkey) to see an example display.
    6.Select the menu under the item and press  .
    For Standby, also set animation starting time. Select the option
    under afterand press  , then highlight your desired setting
    time and press  .
    Get New:start up a Browser and you can select an item to
    download. (See page 113.)
    To deactivate this feature, select Offduring step 6 above.
    Preview
    Section 2: Understanding Your PCS Phone
    2B: Controlling Your Phone’s Settings 39
    Changing the Backlight Time Length
    The backlight setting lets you select how long the display screen
    and keypad are backlit after any key press is made.
    To change the Main LCD or Sub LCD backlight setting:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Displayand press  .
    4.Highlight Backlightand press  .
    5.Highlight Main LCDor Sub LCDand press  .
    6.Select Always On,Always Offor your defined time length and
    press  .
    Always Offalways turns the backlight off.
    Always Onalways turns the backlight on.
    Note:Always Onsetting returns to previous value on next power cycle.
    To change Keypad backlight setting:
    1.From step 5 above, select the menu under Keyand press  .
    2.Select Always Offor your defined time length and press  .
    Note:Long backlight settings affect the battery’s talk and standby times.
    Section 2: Understanding Your PCS Phone
    38 2B: Controlling Your Phone’s Settings 
    						
    							Changing the Display for the Standby Mode
    This feature enables you to select a variety of items to display on
    the Standby mode.
    Follow these steps:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Displayand press  .
    4.Highlight Standby Displayand press  .
    5.Select your desired item and press  .
    Screen Saverselects the screen saver to display.
    Calendardisplays the Calendar.
    Time (Large)displays the local time in a large, simple format.
    World Clockdisplays the time of the selected country along
    with the local time. You can scroll the World Clock list and
    change the country by pressing the left or right Navigation
    key. When applicable, the  (left softkey)/
    (right softkey) can be used to change between summer and
    standard time.
    Tip:You can also display the World Clock from Tools/Extras menu. See “Using the World Clock” on page 106.
    Defaultsets this feature to default.
    6.After following each system prompt or confirming the
    preview display, press  to save the setting.
    Tip:In a no-service area, Screen Saver, Calendar, Time (Large), or WorldClock cannot be shown on the Standby display.
    StandardSummer
    Section 2: Understanding Your PCS Phone
    2B: Controlling Your Phone’s Settings 41
    Section 2: Understanding Your PCS Phone
    40 2B: Controlling Your Phone’s Settings
    Changing the Display for Incoming Calls
    You can set the color or downloaded image (screen saver) data
    to be shown on the Incoming Calls display.
    Follow these steps:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Displayand press  .
    4.Highlight Incoming Callsand press  .
    5.Select the menu under Incoming Callsand press  .
    6.Highlight your desired color or downloaded image (screen
    saver) and press  .
    Get New:start up a Browser and you can select an item to
    download. (See page 113.)
    Multimedia:to set the image downloaded by Multimedia Master
    (see page 107 for downloading).
    Pictures:to set a picture in Picture Wallet (see pages 140-141).
    To see a display preview, press  (right softkey) during
    step 6 above. Then press  (right softkey) or close the
    clamshell to confirm the image on the Sub LCD.
    To adjust the position of the image, use your Navigation key
    during step 6 above.
    Note:Use PCS Connection Kit (sold separately) for downloading the datafrom PC. 
    Sub LCD
    Preview 
    						
    							Changing the Display Color
    To change the display’s color scheme:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Displayand press  .
    4.Highlight Colorand press  .
    5.Highlight Main LCDor Sub LCDand press  .
    6.Select your desired color and press  .
    Changing the Font Size
    There are two font size settings for the message notification and
    browser. To change the font size, follow these steps:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Displayand press  .
    4.Highlight Font Sizeand press  .
    5.Highlight either Notificationsor Browserand press  .
    6.Select your desired font size.
    Press  (right softkey) to display a font size example.
    7.Press  to set the selected font.
    Tip:From the font example display, you can switch the Normal/Small fontdisplays by pressing the left/right of the Navigation key.
    Preview
    Section 2: Understanding Your PCS Phone
    2B: Controlling Your Phone’s Settings 43
    Changing the Screen Saver
    Your new PCS Phone offers you the option of displaying a screen
    saver while in Standby mode.
    To assign a screen saver:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Displayand press  .
    4.Highlight Standby Displayand press  .
    5.Select Screen Saverand press  .
    6.Select the menu under Screen Saverand press  .
    7.Highlight your desired screen saver and press  .
    Get New:start up a Browser and you can select an item to
    download. (See page 113.)
    Multimedia:to set the image downloaded by Multimedia Master
    (see page 107 for downloading).
    Pictures:to set a picture in Picture Wallet (see pages 140-141).
    To see a display preview, press  (right softkey) at the
    step 7 above. Then press  (right softkey) or close the
    clamshell to confirm the image on the Sub LCD.
    To adjust the position of the image, use your Navigation key
    during step 7 above.
    8.Press  (left softkey) to save the screen saver.
    Changing the Display for Mi Amigo
    This feature enables you to see a funny animation for 30 seconds
    on the Main LCD after opening the f lip.
    Follow these steps:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Displayand press  .
    4.Highlight Mi Amigoand press  .
    5.Select Onor Offand press  .
    Press  (right softkey) during step 5 above to see a
    display preview.Preview
    Save
    Sub LCD
    Preview
    Section 2: Understanding Your PCS Phone
    42 2B: Controlling Your Phone’s Settings 
    						
    							Airplane Mode
    When your phone is in Airplane mode, it cannot send or receive
    any calls (except for 911 dialing) or access online information.
    You may still use the phone’s other features, such as Voice Memos,
    Calculator, Calendar, etc., while you are in Airplane mode.
    To set your phone to Airplane mode:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Airplane Modeand press  .
    4.The display shows a message. Press  or  (left softkey).
    Press  (right softkey) to return to the setting display.
    5.Select Onand press  .
    To deactivate this feature, select Offduring step 5 above.
    Note:While in Airplane mode, your phone’s standby screen will display“Phone Off.” 
    Cancel
    OK
    Section 2: Understanding Your PCS Phone
    2B: Controlling Your Phone’s Settings 45
    Location Settings
    Your PCS Phone is equipped with a Location feature which 
    will allow the network to detect your position, making some 
    PCS Applications easier to use. Turning Location off will hide
    your location from everyone except 911.
    Note: Even if the Location feature is enabled, no service may use yourlocation without your expressed permission.
    To enable your phone’s Location feature:
    1.Press  to access the main menu.
    2.Highlight Settingsand press  .
    3.Highlight Locationand press  .
    4.Press  or  (left softkey) or wait a few seconds until the
    message scrolls down completely.
    5.Select Onand press  .
    To deactivate this feature, select Offduring step 5 above.
    Tip:These icons let you know whether information of your position is
    sent to the network or not. If you are in a no service or roaming area,
    indication is always  .
    indicates the Location Service is enabled.
    indicates the Location Service is disabled.
    OK
    Section 2: Understanding Your PCS Phone
    44 2B: Controlling Your Phone’s Settings 
    						
    All Sanyo manuals Comments (0)

    Related Manuals for Pcs Phone Sanyo Scp 8100 User Guide