Para Single Actio LDA PXT Instruction Manual

This will retract the two small tabs at the rear of  the extension 
which keep  it in place. Gently increase the pressure on the 
release lever until some resistance is felt.
CAUTION:
  Do not apply excessive pressure to the release lever 
or it may break off. 
CAUTION:  The spring and follower  are compressed in the 
magazine. Care should be taken during this step to prevent 
them from flying out.
STEP  4:   While maintaining 
the gentle pressure on 
the release  lever, begin 
to rotate the magazine...

Clean all residue from the spring and from the magazine  
follower.
CAUTION:
  Do not apply oil to any part or lubricate any part  
of  the magazine.
REASSEMBLY
STEP 1:  Insert the spring and follower into the  opening at the  
bottom of  the metal magazine body
CAUTION:
  Make sure that the rounded top edge of  the  
follower is at the front of  the magazine.
Position the bottom of  the spring around the four posts on 
the magazine extension. Then, gently compress the spring with 
the magazine...

DO NOT STORE your pistol in anything which will attract  
moisture, e.g., leather or heavy cloth, and do not store it in an  
air-tight container or with a plug inserted in the barrel for these 
are factors that can contribute to corrosion.
EXTENDED STORAGE requires that the internal mechanisms 
are well oiled with an acid-free lubricating oil or preservative 
 
while external mechanisms (receiver, barrel, etc.) should be  
coated with an anti-rust oil.
COLD CLIMATE STORAGE requires that you make use of...

42
NOTE:  PARA-ORDNANCE HAS CAREFULLY PACKAGED THIS 
PRODUCT PRIOR TO SHIPMENT FROM THE FACTORY. 
PLEASE EXAMINE IT CAREFULLY AT TIME OF PURCHASE 
TO ENSURE IT IS UNDAMAGED.
PARA- ORDNANCE SHALL NOT BE RESPONSIBLE IN ANY MANNER WHATSOEVER FOR INJURY, DEATH, OR DAMAGE 
TO PROPERTY AS A RESULT OF THE INTENTIONAL OR 
ACCIDENTAL DISCHARGE OF  THIS FIREARM, OR FROM 
ITS PROPER FUNCTION WHEN THE PISTOL IS USED 
FOR PURPOSES FOR WHICH IT WAS NOT DESIGNED. 
FURTHERMORE, PARA-ORDNANCE SHALL NOT BE 
RESPONSIBLE...

44
S-A SINGLE STACK PARTS ILLUSTRATIONSINGLE-ACTION, SINGLE STACK PARTS LIST
45
��
��
��
��
��
���
��
���
���
���
��
�
�
�
�
�
�
��
��
��
��
���
��
��
��
��
��
�� ����
��
����
��
��
��
��
��
��
��
��
��
��
��
����
��
��
��
������������
���
��
RECOIL SPRING ASSEMBLY
  1.  BARREL
  2.  BARREL LINK
  3.  BARREL LINK PIN
  4.  DISCONNECTOR
  5  EJECTOR
  6.  EJECTOR PIN
    
7A. EXTRACTOR CLAW
    7B. EXTRACTOR BODY
    7C.  EXTRACTOR PLUNGER
    7D. EXTRACTOR SPRING
  8.  FIRING PIN
  9.  FIRING PIN...

46
SINGLE-ACTION, HI-CAP PARTS ILLUSTRATION
47
SINGLE-ACTION, HI-CAP PARTS LIST
��
��
��
��
��
���
��
���������
���
��
�
��
�
�
�
�
�
�
��
��
��
��
���
���
��
��
����
��
��
����
��
����
��
��
��
��
��
��
��
���
��
��
��
��
��
��
����
��
��
��
���
 1.  BARREL
  2.  BARREL LINK
  3.  BARREL LINK PIN
  4.  DISCONNECTOR
  5.  EJECTOR
  6.  EJECTOR PIN
    
7A. EXTRACTOR CLAW
    7B. EXTRACTOR BODY
    7C.  EXTRACTOR PLUNGER
    7D. EXTRACTOR SPRING
  8.  FIRING PIN
  9.  FIRING PIN PLUNGER
 10.  FIRING PIN...

LDA SINGLE STACK PARTS ILLUSTRATIONLDA SINGLE STACK PARTS LIST
4948
��
���
��
���
������
��
��
��
��
��
��
��
�����
��
�
�
�
�
�
���
���
��
��
��
��
��
����
��
��
��
��
��
��
��
��
��
���
��
����
����
��
���
��
���
��
��
����
��
��
��
��
���
������
��
   1. BARREL 2. BARREL LINK 3. BARREL LINK PIN 4. DRAWBAR  5. EJECTOR 6. EJECTOR PIN 7A. EXTRACTOR CLAW 7B. EXTRACTOR BODY 7C. EXTRACTOR PLUNGER 7D. EXTRACTOR SPRING 8. FIRING PIN 9. FIRING PIN PLUNGER
10. FIRING PIN SPRING
11. FIRING PIN STOP
12. FRONT...

5051
LDA HIGH CAPACITY PARTS ILLUSTRATIONLDA HIGH CAPACITY PARTS LIST
�����
���
��
��
������
��
��
��
��
��
��
��
���
��
��
�
�
�
�
�
� ��
����
��
��
���
��
��
��
��
����
��
��
��
��
��
��
��
��
��
��
���
��
����
����
��
��
�� ��
��
��
��
��
���������
��
 
1. BARREL
  2. BARREL LINK
  3. BARREL LINK PIN
  4. DRAWBAR
  5. EJECTOR
  6. EJECTOR PIN
    
7A. EXTRACTOR CLAW
    7B. EXTRACTOR BODY
    7C. EXTRACTOR  PLUNGER
    7D. EXTRACTOR SPRING
  8. FIRING PIN
 9. FIRING PIN PLUNGER
10. FIRING PIN SPRING...

FIREARM RECORD
980 TAPSCOTT ROAD
SCARBOROUGH, ONTARIO M1X 1C3 (416) 297-7855 • FAX: (416) 297-1289 www.paraord.com
MANUAL #PO0904SB
Para
MODEL
SERIAL NO.
PURCHASED FROM
DATE PURCHASED
This instruction manual should always accompany this firearm  
and be transferred with it upon change of  ownership.