Panasonic Wv Sw355 Installation Guide

							41
Install the software
Before installing the software, refer to the readme file on the provided CD-ROM first.
Software included on the provided CD-ROM
  •  Panasonic IP setting software
    Configure the network settings of the camera. Refer to the following for further\
 information. 
  •  Viewer Software "Network Camera View 4S"
    It is necessary to install the viewer software "Network Camera View 4S" to display images on a PC. Install the viewer software by double-clicking the "nwcv4Ssetup.exe" icon on the provided 
CD-ROM. 
Configure the network settings of the camera using the 
Panasonic IP setting software
It is possible to perform the network settings of the camera using the I\
P setup software on the pro-
vided CD-ROM. 
When using multiple cameras, it is necessary to configure the network settings of each camera 
independently. 
If the Panasonic IP setting software does not work, configure the network settings of the camera 
and the PC individually on the "Network" page of the setup menu. Refer t\
o the Operating 
Instructions (PDF) for further information.
Important: 
  •  When using Microsoft Windows 7 or Microsoft Windows Vista, the "Windows Security Alert"  window may be displayed when starting the IP setup software. In this case, disable "User 
Account Control" from the control panel.
  •  For the security enhancement, the MAC address/IP address of the camera to be configured will  not be displayed when around 20 minutes have passed after turning on the power of the cam-
era. (When the effective period is set to "20min" in the IP setup)
  •  Panasonic IP setting software is inoperable in other subnets via the same router.
  •  This camera cannot be displayed or set with an older version of the IP s\
etup software (version  2.xx).
Configure the network settings 
						

							42
z  Start the Panasonic IP setting software by double-clicking the "EasyIpSetup.exe" icon on the 
provided CD-ROM.
    The License Agreement will be displayed. Read the Agreement and choose "I accept the term  in the license agreement", and click "OK".
x  Click the [Network Settings] button after select-
ing the MAC address/IP address of the camera 
to be configured. 
Note:
  •  When using a DHCP server, the IP address assigned to the camera can be displayed by click- ing the [Search] button of the IP setting software. 
  • When a duplicate IP address is used, the corresponding camera number will be displayed  shaded. 
  •  When the [Access Camera] button is clicked, live images of the selected \
camera will be dis- played.
  •  It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addresses  in accordance with the protocol in use.
c Complete each network setup item and click the [Save] button.
Note:
  •  When selecting "DHCP" or "AutoIP", it is possi- ble to set "DNS" to "Auto". 
Important: 
  •  It may take for around 2 minutes to complete to upload the settings to the camera after cl\
icking  the [Save] button. The settings may be invalidated when the 12 V DC powe\
r supply is cut or 
when the AC adaptor or the LAN cable is disconnected before completing the upload. In this 
case, perform the settings again.
  •  When using a firewall (including software), allow access to all UDP ports. 
						

							43
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in th\
e 
table or a problem is not described below. 
SymptomCause/solutionReference 
pages
Power is not turned on.  When using DC power supply
  •  Is DC 12 V power supply connected to the 2P 
power supply cable?
    Check whether the connection is appro-
priately established.
  • Is the AC adaptor in use compliant with the  Specifications?
   Check the Specifications regarding AC 
adaptor. 
When using a PoE device for power supply
  •  Are the PoE device and the network cable of  the camera connected using a LAN cable?
    Check whether the connection is appro-
priately established.
  •  Depending on the PoE device, the power sup- ply will stop when the demanded power 
exceeds its total power limit for all PoE ports. 
    Refer to the operating instructions of the 
PoE device in use. 26
Troubleshooting 
						

							44
• Basic
Power source:  12 V DC, PoE (IEEE802.3af compliant)
Power consumption:  12 V DC*: 300 mA, PoE 48 V: 80 mA (Class 0 device)



(With heater): 12 V DC*: 1.1 A, PoE 48 V: 240 mA (Class 0 device)
   *  FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC 
CLASS 2 POWER SUPPLY.
Ambient operating temperature:  –10 °C to +50 °C {14 °F to 122 °F}
   (With heater):  –30 °C to +50 °C {–22 °F to 122 °F}
Ambient operating humidity:  Less than 90 % (no condensation)
Waterproof:  Camera: IP66 (IEC60529)
   *  Only when installation work specified in this book is properly 
performed and appropriate waterproof treatment is performed 
Shock resistance:   Compliant with 50 J IEC60068-2-75
Monitor output (for adjusting the 
    angular field of view):  VBS: 1.0 V [p-p]/75 Ω, composite signal, RCA jack
EXT I/O terminal cable:  ALARM IN, DAY/NIGHT IN, ALARM OUT, AUX OUT (x1 for each)
Microphone/line input cable:  ø3.5 mm monaural mini jack
    Input impedance: Approx. 2 kΩ
  For microphone input:  Applicable microphone: Plug-in power type
    Supply voltage: 2.5 V ±0.5 V
  For line input:  Input level: Approx. –10 dBV
Audio output cable:  ø3.5 mm stereo mini jack (monaural output)
    Output impedance: Approx. 600 Ω
   Line level
Dimensions:  ø164 mm x 146 (H) mm x 191.5 (W) mm 
{ø6-15/32 inches x 5-3/4 inches (H) x 7-17/32 inches (W)} 
(including projection of the base cover fixing screw)
Mass:  Approx. 1.6 kg {3.53 lbs}
Finish:  Main body: Aluminum die cast, light gray
    Dome section: Clear polycarbonate resin
• Camera
Image sensor:  1/3-type MOS image sensor
Effective pixels:  Approx. 1.3 megapixels
Scanning area:  4.80 mm (H) × 3.60 mm(V) {3/16 inches (H) x 5/32 inches (V)}
Scanning system:  Progressive
Minimum illumination 
SW355 :  Color:   0.3 lx {0.03 footcandle}  (F1.6, Auto slow shutter: Off (1/30 s), Gain:On(High))
      0.019 lx {0.0019 footcandle} 
  (F1.6, Auto slow shutter: max. 16/30 s, Gain:On(High))*
   BW:  0.05 lx {0.005 footcandle} 
(F1.6, Auto slow shutter: Off (1/30 s), Gain:On(High))
      0.003 lx {0.0003 footcandle} 
(F1.6, Auto slow shutter: max. 16/30 s, Gain:On(High))*
Minimum illumination 
SW352 :  Color:   0.2 lx {0.02 footcandle}  (F1.6, Auto slow shutter: Off (1/30 s), Gain:On(High))
      0.013 lx {0.0013 footcandle} 
(F1.6, Auto slow shutter: max. 16/30 s, Gain:On(High))*
Specifications 
						

							45
  BW:  0.04 lx {0.004 footcandle} 
(F1.6, Auto slow shutter: Off (1/30 s), Gain:On(High))
      0.002 lx {0.0002 footcandle} 
(F1.6, Auto slow shutter: max. 16/30 s, AGC: High)*
    * Converted value
Super-Dynamic: On/Off
Dynamic range:  52 dB typ. (Super-Dynamic: On, light control: indoor scene)
Gain (AGC):  On(Low)/ On(Mid)/ On(High)/ Off
Adaptive black stretch:  On/Off
Light control mode setting:  Indoor scene (50 Hz/60 Hz)/ Outdoor scene/ Fix shutter
Shutter speed:  1/30, 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250, 1/500, 
1/1000, 1/2000, 1/4000, 1/10000 (only at Super-Dynamic Off)
Auto slow shutter:  Off (1/30 s), max. 2/30s, max. 4/30s, max. 6/30s, max. 10/30s, 
max. 16/30s
Color/BW:  On/ Off/ AUTO1/ AUTO2
White balance:  ATW1/ ATW2/ AWC
Digital noise reduction:  High/Low
Video analytics
   Face detection:  On/Off (with the XML notification setting)
Privacy zone:  On/Off (up to 2 zones available)
VIQS:   On/Off
Camera title on screen:  Up to 20 characters (alphanumeric characters, marks) On/Off
Video motion detection 
   (VMD alarm):  On/Off, 4 areas available
 
• Lens
Zoom ratio:  3.6x
    Extra zoom: 7.2x (under VGA resolution)
Focal length:  2.8 mm - 10 mm
Maximum aperture ratio:  1:1.6 (WIDE) - 1:3.6 (TELE)
Angular field of view:  Horizontal:  27.7° (TELE) - 100.8° (WIDE)
    Vertical:  20.8° (TELE) - 73.8° (WIDE)
Adjusting angle:  Horizontal:  180 ° (clockwise), 160 ° (counterclockwise)
   Vertical: ±75°
    Image tilt adjustment range: ±100°
• Network
Network:  10BASE-T/100BASE-TX, RJ45 connector
Resolution 
SW355 :  Aspect ratio: 4:3
    H.264   1280×960/ VGA (640×480)/ 
QVGA (320×240), max. 30 fps
    MPEG-4   VGA (640×480)/ QVGA (320×240), 
max. 30 fps
    JPEG (MJPEG)  1280×960/ VGA (640×480)/ 
QVGA (320×240), max. 30 fps
    Aspect ratio: 16:9
      H.264  1280×720/ 640×360/ 320×180, max. 30 fps
      JPEG (MJPEG)  1280×720/ 640×360/ 320×180, max. 30 fps
    * MPEG-4 is not supported. 
Resolution 
SW352 :  Aspect ratio: 4:3
    H.264   800×600/ VGA (640×480)/ QVGA (320×240), 
max. 30 fps 
						

							46
   MPEG-4   VGA (640×480)/ QVGA (320×240), 
max. 30 fps
    JPEG (MJPEG)  800×600/ VGA (640×480)/ QVGA (320×240), 
max. 30 fps
    Aspect ratio: 16:9
      H.264  640×360/ 320×180, max. 30 fps
      JPEG (MJPEG)  640×360/ 320×180, max. 30 fps
    * MPEG-4 is not supported. 
Image compression method*
1 *2: H.264/MPEG4
      Image quality: Low/Normal/Fine
      Transmission type: Unicast/Multicast
      Audio bit rate: 
     Constant bit rate/Best effort: 64kbps/ 128kbps/ 256kbps/ 
384kbps/ 512kbps/ 768kbps/ 1024kbps/ 1536kbps/ 
2048kbps/ 3072kbps/ 4096kbps/ *8192kbps
      * only in H.264 mode 
SW355
   Frame rate:
      1fps/ 3fps/ 5fps/ 7.5fps/ 10fps/ 12fps*/ 15fps/ 20fps/ 30fps
      * PAL model only
   JPEG (MJPEG)
    Image quality: 
     0 SUPER FINE/ 1 FINE/ 2/ 3/ 4/ 5 NORMAL/ 6/ 7/ 8/ 
9 LOW (10 steps: 0-9)
    Transmission type: PULL/PUSH
Transmission interval:  0.1 fps - 30 fps (JPEG frame rate will be restricted when dis-
playing both JPEG and H.264/MPEG-4 images.)
Audio compression method:  G.726 (ADPCM) 32kbps/16kbps
    G.711 64 kbps
Bandwidth control:  Unlimited/ 64kbps/ 128kbps/ 256kbps/ 384kbps/ 
512kbps/ 768kbps/ 1024 kbps/ 2048kbps/ 4096kbps/ 
8192kbps 
SW355
Protocol:  IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, 
NTP, SNMP, DHCPv6
    IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, 
FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP
OS*
3 *4:  Microsoft Windows 7 Professional (64-bit)
    Microsoft Windows 7 Professional (32-bit)
    Microsoft Windows Vista Business SP1 (32-bit)
    Microsoft Windows XP Professional SP3
Browser:  Windows Internet Explorer 8.0 (32-bit)
    (Microsoft Windows 7 Professional (32-bit/64-bit))
    Windows Internet Explorer 7.0
    (Microsoft Windows Vista Business SP1 (32-bit))
    Microsoft Internet Explorer 6.0 SP3
    (Microsoft Windows XP Professional SP3)
Maximum concurrent 
   access number:  14 (Depends on network conditions)
FTP client:  Alarm image transmission, FTP periodic transmission (When the  
						

							47
FTP transmission is failed, backup on an optional SDHC/SD 
memory card is available.)
Multi-screen:  Up to 16 camera images can be displayed simultaneously on a  multi-screen. (Including the camera itself)
Compatible SDHC/
   SD memory card (option):  Manufactured by Panasonic
    SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB
    SD memory card: 256 MB, 512 MB, 1 GB, 2 GB
    (except miniSD card and microSD card)
Cellular phone compatibility:  JPEG image, AUX control (by access level)
  *1  Either H.264 or MPEG-4 is selectable.
  *2  Transmission for 2 streams can be individually set in the same compression method.
  *3  Refer to "Notes on Windows Vista
® / Windows® 7" (PDF) on the provided CD-ROM for further 
information about system requirements for a PC and precautions when using Microsoft 
Windows 7 or Microsoft Windows Vista. 
  *4  When using IPv6 for communication, use Microsoft Windows 7 or Microsoft Windows Vista.  
						

							48
Installation Guide (this document) ......................................................1 pc.
Warranty card (NTSC model only) ......................................................1 pc.
CD-ROM*
1 .......................................................................\
.................1 pc.
Code label*
2 .......................................................................\
...............1  pc.
The following parts are used during installation procedures.
4P alarm cable ........................................................................\
..........1 pc.
Camera attachment ........................................................................\
...1 pc.
2P power cable ........................................................................\
.........1 pc.
Fixing screws (M4 x 8 mm) .............................5 pcs. (of them, 1 for spare)
Base cover ........................................................................\
................1 pc.
Mount bracket ........................................................................\
...........1 pc.
Bit for tamperproof screw ..................................................................1 pc.
Butyl tape ........................................................................\
..................1 pc.
 *1  The CD-ROM contains the operating instructions (PDFs) and different kinds of tool software  programs. 
  *2  This label may be required for network management. The network administrator shall retain the  code label. 
Standard accessories 
						

							49
Ceiling mount bracket ..................................................WV-Q169
Smoke Dome Cover ....................................................WV-CW4S
Heater Unit ..................................................................WV-SW3H
User License Accessory (For MPEG-4) ........................ BB-HCA5A (NTSC model) BB-HCA5CE (PAL model, Korea*)
* Required in Korea
User License Accessory (For H.264) ............................ BB-HCA8A (NTSC model) BB-HCA8CE (PAL model, Korea*)
* Required in Korea
Optional accessories 
						

							50