Panasonic Wv Sf336 Install Installation Guide

31
 w  When  the  auto  focus  (AF)  button  on  the  lateral  side  of  camera  is  pressed,  the  auto  focus  (AF) 
indicator will light for around 10 seconds, and the focus is automatically adjusted.
Important:
	 •	 Do	not	move	the	focus	ring.
 
Note:
	 •	 If	 the	zoom	 lock	knob	 is	slightly	 fastened	 before	the	zoom	 ring	is	moved,	 the	ring	 will	become	
stable to ease the fine adjustment. 
	 •	 When	 positioning	 the	zoom	 ring	at	a	step	 short	 of	the	 "T"	(or	"W")	 end,	 the...

32
 Adjust the angular field of view and the focus. SF335SF332
 The  angular  field  of  view  and  focus  can  be  adjusted  in  accordance  with  the  distance  between 
the  camera  lens  and  a  photographic  subject.  These  adjustments  shall  be  performed  together 
with the camera angle adjustment. 
    FOCUS ADJUSTMENT    
   
 LOW       HIGH
  .......
|............
INDICATOR   775   BEST
 
PEAK HOLD   780   FOCUS
Zoom lock knob
Focus lock knob
Focus ring
Zoom ring
Loosen Tighten
Focus assist...

33
Note:
  q  When  shooting  the  following  subjects,  close  the  "FOCUS  ADJUSTMENT"  menu  by  pressing 
the  focus  assist  (F.A.)  button  again,  or  adjust  the  focus  to  obtain  the  best  focus  position  while 
monitoring images from the camera. 
	 •	 Subj.	moving	frequently	or	having	large	illuminance	change
	 •	 Subj.	with	low	illuminance
	 •	 Subj.	with	reflection	or	extra	brightness
	 •	 Subj.	through	a	window
	 •	 Place	where	the	lens	easily	becomes	dirty
	 •	 Subj.	with	less...

34
Attaching the dome cover
z Align  the  indication  "OPEN"  to  the  maker 
of the camera to attach the dome cover. 
x Remove  the  cover  film  from  the  dome 
cover except the dome section.
c Adjust  the  direction  of  the  inner  dome  
(☞ page 16). 
  Rotate the dome cover clockwise to adjust 
the  marker  to  "ADJUST".  The  clear  dome 
and  the  inner  dome  can  rotate  together  in 
this  state.  Rotate  the  dome  section  of  the 
dome  cover  to  adjust  the  direction  so...

35
Important:
	 •	 For	 inner	dome	 adjustments,	 adjust	the	marker	 to	the	 "ADJUST"	 position.  If  the  dome  section 
is  moved  with  unreasonable  force  from  the  "LOCK"  position,  this  may  be  a  cause  of  destruc-
tion.
 
v  Rotate the dome cover clockwise to adjust 
the marker to "LOCK". 
b Fix the dome cover and camera by tighten-
ing  the  dome  cover  fixing  screw  (M3,  step 
screw, x1). 
n After  the  installation  is  complete,  remove 
the cover film, which...

36
Configure the network settings
Install the software
Before installing the software, refer to the readme file on the provided CD-ROM first. 
Software included on the provided CD-ROM
	 •	 Panasonic	IP	setting	software
   Configure the network settings of the camera. Refer to the following for further\
 information. 
	 •	 Viewer	Software	"Network	Camera	View 4"
    It  is  necessary  to  install  the  viewer  software  "Network  Camera  View  4"  to  display  images  on  a 
PC.  Install...

37
z Start the Panasonic IP setting software. 
x Click  the  [IP  setting]  button  after  selecting  the 
MAC  address/IP  address  of  the  camera  to  be 
configured. 
Note:
	 •	 When	 using	a	DHCP	 server,	 the	IP	address	
assigned  to  the  camera  can  be  displayed  by 
clicking  the  [Refresh]  button  of  the  IP  setting 
software. 
	 •	 When	 a	duplicate	 IP	address	 is	used,	 the	corre-
sponding  MAC  address/IP  address  will  be  dis-
played shaded. 
 
c  Complete  each  network  setup...

38
Troubleshooting
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the 
table or a problem is not described below. 
SymptomCause/solutionReference 
pages
Power is not turned on. 
When using DC power supply
	•	 Is	12	V	DC	power	supply	connect	to	
the power supply terminal?
   →   Check whether the connection is 
appropriately established. 
	•	 Is	the	AC	adaptor	in	use	compliant	with...

39
Specifications
● Basic
Power source: 12 V DC, PoE (IEEE802.3af compliant)
Power consumption:  WV-SF336
     12 V DC*: 320 mA, PoE: 4.2 W (Class 2 device)
    WV-SF335, WV-SF332
     12 V DC*: 280 mA, PoE: 3.5 W (Class 2 device)
   *  FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC 
CLASS 2 POWER SUPPLY.
Ambient operating temperature:  –10 °C to +50 °C {14 °F to 122 °F} (no condensation)
Ambient operating humidity:  Less than 90 %
Monitor output (for adjusting 
   the angular field of view):  VBS: 1.0 V...

40
   WV-SF332 (800×600)
     Color:    0.2 lx {0.02 footcandle} (F1.4, Auto slow shutter: Off 
(1/30 s), AGC: High) 
0.013 lx {0.0013 footcandle} (F1.4, Auto slow shut-
ter: max. 16/30 s, AGC: High)*
     BW:    0.13 lx {0.013 footcandle} (F1.4, Auto slow shutter: 
Off (1/30 s), AGC: High) 
0.009 lx {0.0009 footcandle} (F1.4, Auto slow shut-
ter: max. 16/30 s, AGC: High)*
     * Converted value
Wide dynamic range:  On/Off
Gain (AGC):  On(Low)/On(Mid)/On(High)/Off
Adaptive black stretch:  On/Off
Light...