Panasonic Wv Sf336 Install Installation Guide

							31
 w  When  the  auto  focus  (AF)  button  on  the  lateral  side  of  camera  is  pressed,  the  auto  focus  (AF) 
indicator will light for around 10 seconds, and the focus is automatically adjusted.
Important:
	 •	 Do	not	move	the	focus	ring.
 
Note:
	 •	 If	 the	zoom	 lock	knob	 is	slightly	 fastened	 before	the	zoom	 ring	is	moved,	 the	ring	 will	become	
stable to ease the fine adjustment. 
	 •	 When	 positioning	 the	zoom	 ring	at	a	step	 short	 of	the	 "T"	(or	"W")	 end,	 the	focus	 adjustment	
will be easier.
	 •	 When	 shooting	in  the  following  place  or  the  following  subjects,  focus  may  not  be  adjusted 
automatically.  In  this  case,  adjust  the  focus  manually  from  the  setup  menu.  Refer  to  the 
Operating  Instructions  (PDF)  for  how  to  perform  the  manual  focus  adjustment  from  the  setup 
menu. 
	 •	 Place	where	the	dome	easily	becomes	dirty
	 •	 Subj.	moving	frequently
	 •	 Subj.	with	large	illuminance	change
	 •	 Subj.	with	low	illuminance
	 •	 Subj.	with	reflection	or	extra	brightness
	 •	 Subj.	through	a	window
	 •	 Subj.	with	less	contrast	such	as	white	wall
	 •	 Subj.	with	heavy	flicker
 
     
						

							32
 Adjust the angular field of view and the focus. SF335SF332
 The  angular  field  of  view  and  focus  can  be  adjusted  in  accordance  with  the  distance  between 
the  camera  lens  and  a  photographic  subject.  These  adjustments  shall  be  performed  together 
with the camera angle adjustment. 
    FOCUS ADJUSTMENT    
   
 LOW       HIGH
  .......
|............
INDICATOR   775   BEST
 
PEAK HOLD   780   FOCUS
Zoom lock knob
Focus lock knob
Focus ring
Zoom ring
Loosen Tighten
Focus assist 
(F.A.) button
 
q  Loosen the zoom lock knob and focus lock knob, and adjust the angular field of view in accor-
dance with the photographic subject by moving the zoom lock knob and foc\
us ring. 
  w  Fasten the zoom lock knob. 
  e  Press the focus assist (F.A.) button. 
  → "FOCUS ADJUSTMENT" menu will be displayed. 
    The focus assist function will be activated to perform the optimum adjus\
tment. 
  r  When  the  focus  ring  is  positioned  near  the  best  focus  position,  the  position  will  automatically 
be  memorized  as  the  "PEAK  HOLD"  position.  (The  closer  the  focus  ring  is  positioned  to  the 
best focus position, the greater the "PEAK HOLD" value becomes.) 
  t  When  the  focus  ring  is  moved,  the  current  focus  position  will  be  indicated  on  "INDICATOR". 
Adjust the focus position so that the indicator value goes close to the \
"PEAK HOLD" position. 
  y  When  the  indicator  value  goes  to  the  best  focus  position,  "BEST  FOCUS"  will  be  displayed  in 
reverse at the lower right corner of the screen. 
  u  Fasten the focus lock knob so as to fix the best focus position. 
  i  Press  the  focus  assist  (F.A.)  button  again  to  close  the  "FOCUS  ADJUSTMENT"  menu.  (No 
operation for 3 minutes also closes the menu.)
     
						

							33
Note:
  q  When  shooting  the  following  subjects,  close  the  "FOCUS  ADJUSTMENT"  menu  by  pressing 
the  focus  assist  (F.A.)  button  again,  or  adjust  the  focus  to  obtain  the  best  focus  position  while 
monitoring images from the camera. 
	 •	 Subj.	moving	frequently	or	having	large	illuminance	change
	 •	 Subj.	with	low	illuminance
	 •	 Subj.	with	reflection	or	extra	brightness
	 •	 Subj.	through	a	window
	 •	 Place	where	the	lens	easily	becomes	dirty
	 •	 Subj.	with	less	contrast	such	as	white	wall
	 •	 Subj.	with	heavy	flicker
  w  If  the  zoom  lock  knob  is  slightly  fastened  before  the  zoom  ring  is  moved,  the  ring  will  become 
stable to ease the fine adjustment.
  e  If  the  focus  lock  knob  is  slightly  fastened  before  the  focus  ring  is  moved,  the  ring  will  become 
stable to ease the fine adjustment. 
  r  In  case  the  angular  field  of  view  has  changed  during  adjustment,  close  the  "FOCUS 
ADJUSTMENT"  menu  once  by  pressing  the  focus  assist  (F.A.)  button.  (When  the  angular  field 
of  view  changes,  the  indicator  values  of  "PEAK  HOLD"  and  "INDICATOR"  also  change.)  After 
fixing the angular field of view, retry Step 3.  
						

							34
Attaching the dome cover
z Align  the  indication  "OPEN"  to  the  maker 
of the camera to attach the dome cover. 
x Remove  the  cover  film  from  the  dome 
cover except the dome section.
c Adjust  the  direction  of  the  inner  dome  
(☞ page 16). 
  Rotate the dome cover clockwise to adjust 
the  marker  to  "ADJUST".  The  clear  dome 
and  the  inner  dome  can  rotate  together  in 
this  state.  Rotate  the  dome  section  of  the 
dome  cover  to  adjust  the  direction  so  that 
no eclipse may be caused.
    
ADJUSTOPENLOCK
Marker
Dome 
cover Dome 
alignment 
indication 
OPEN
Dome section
ADJUST
OPENLOCK 
						

							35
Important:
	 •	 For	 inner	dome	 adjustments,	 adjust	the	marker	 to	the	 "ADJUST"	 position.  If  the  dome  section 
is  moved  with  unreasonable  force  from  the  "LOCK"  position,  this  may  be  a  cause  of  destruc-
tion.
 
v  Rotate the dome cover clockwise to adjust 
the marker to "LOCK". 
b Fix the dome cover and camera by tighten-
ing  the  dome  cover  fixing  screw  (M3,  step 
screw, x1). 
n After  the  installation  is  complete,  remove 
the cover film, which was removed halfway 
in  Step  2,  completely  from  the  dome  sec-
tion.
m Push down the auto focus (AF) button with 
a  ballpoint  pen  to  adjust  the  focus  again. 
SF336
  Refer  to  page  30  for  further  information 
about adjustment.
Important:
	 •	 Before	 pressing	the	auto	 focus	 (AF)	button,	 make	sure	that	the	marker	 is	adjusted	 to	the	
"LOCK" position. 
SF336
	 •	 When	 using	a	model	 equipped	 with	the	focus	 assist	 (F.	A.)	 function,	 defocus	may	be	caused	 by	
the dome cover attached. 
SF335SF332 
    In  this  case,  the  focus  adjustment  will  be  easier  by  detaching  the  dome  cover  and  moving  the 
focus ring to the "N" direction.
	 •	 Before	attaching	the	dome	cover,	make	sure	that	the	subject	is	present.	
 
ADJUST
OPENLOCK
Dome cover xing screw
(M3, step screw)
LOCK
ADJUST OPEN
ADJUST
OPENLOCKAF
Auto focus (AF) button 
						

							36
Configure the network settings
Install the software
Before installing the software, refer to the readme file on the provided CD-ROM first. 
Software included on the provided CD-ROM
	 •	 Panasonic	IP	setting	software
   Configure the network settings of the camera. Refer to the following for further\
 information. 
	 •	 Viewer	Software	"Network	Camera	View 4"
    It  is  necessary  to  install  the  viewer  software  "Network  Camera  View  4"  to  display  images  on  a 
PC.  Install  the  viewer  software  by  double-clicking  the  "nwcv4setup.exe"  icon  on  the  provided 
CD-ROM. 
Configure the network settings of the camera using the 
Panasonic IP setting software
It  is  possible  to  perform  the  network  settings  of  the  camera  using  the  IP  setting  software  on  the 
provided CD-ROM. 
When  using  multiple  cameras,  it  is  necessary  to  configure  the  network  settings  of  each  camera 
independently. 
If  the  Panasonic  IP  setting  software  does  not  work,  configure  the  network  settings  of  the  camera 
and  the  PC  individually  on  the  "Network"  page  of  the  setup  menu.  Refer  to  the  Operating 
Instructions (PDF) for further information. 
Important:
	 •	 When using Microsoft Windows Vista, the "Windows Security Alert" window may be displayed 
when starting the IP setup software. In this case, disable "User Account Control" from the con-
trol panel. In this case, disable "User Account Control" from the control panel.
	 •	 For	 the	security	 enhancement,	 the	MAC	 address/IP	 address	of	the	 camera	 to	be	 configured	 will	
not be displayed when around 20 minutes have passed after turning on the power of the cam-
era. (When the effective period is set to "20 minutes" in the IP setup)
	 •	 Panasonic	IP	setting	software	is	inoperable	in	other	subnets	via	the	same	router.	
	 •	 This	 camera	cannot	be	displayed	 or	set	 with	 an	older	 version	 of	the	 IP	setting	 software	 (version	
2.xx). 
 
     
						

							37
z Start the Panasonic IP setting software. 
x Click  the  [IP  setting]  button  after  selecting  the 
MAC  address/IP  address  of  the  camera  to  be 
configured. 
Note:
	 •	 When	 using	a	DHCP	 server,	 the	IP	address	
assigned  to  the  camera  can  be  displayed  by 
clicking  the  [Refresh]  button  of  the  IP  setting 
software. 
	 •	 When	 a	duplicate	 IP	address	 is	used,	 the	corre-
sponding  MAC  address/IP  address  will  be  dis-
played shaded. 
 
c  Complete  each  network  setup  item  and  click 
the [Apply] button. 
Note:
	 •	 When	 using	a	DHCP	 server,	 it	is	 possible	 to	set	
"DNS" to "AUTO". 
 
Important:
	 •	 It	may	 take	for	around	 2	minutes	 to	complete	 to	upload	 the	settings	 to	the	 camera	 after	clicking	
the  [Apply]  button.  The  settings  may  be  invalidated  when  the  12  V  DC  power  supply  is  cut  or 
when  the  AC  adaptor  or  the  LAN  cable  is  disconnected  before  completing  the  upload.  In  this 
case, perform the settings again. 
	 •	 When	using	a	firewall	(including	software),	allow	access	to	all	UDP	ports.	
  
						

							38
Troubleshooting
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the 
table or a problem is not described below. 
SymptomCause/solutionReference 
pages
Power is not turned on. 
When using DC power supply
	•	 Is	12	V	DC	power	supply	connect	to	
the power supply terminal?
   →   Check whether the connection is 
appropriately established. 
	•	 Is	the	AC	adaptor	in	use	compliant	with	 the Specifications? 
   →   Check the Specifications regarding 
AC adaptor. 
When using a PoE device for power 
supply
	•	 Are	the	PoE	device	and	the	network	 connector on the rear of the camera 
connected using a LAN cable (4-pair)?
   →   Check whether the connection is 
appropriately established. 
	•	 Depending	on	the	PoE	device,	the	 power supply will stop when the 
demanded power exceeds its total 
power limit for all PoE ports. 
   →   Refer to the operating instructions of 
the PoE device in use.  25 - 26 
						

							39
Specifications
● Basic
Power source: 12 V DC, PoE (IEEE802.3af compliant)
Power consumption:  WV-SF336
     12 V DC*: 320 mA, PoE: 4.2 W (Class 2 device)
    WV-SF335, WV-SF332
     12 V DC*: 280 mA, PoE: 3.5 W (Class 2 device)
   *  FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC 
CLASS 2 POWER SUPPLY.
Ambient operating temperature:  –10 °C to +50 °C {14 °F to 122 °F} (no condensation)
Ambient operating humidity:  Less than 90 %
Monitor output (for adjusting 
   the angular field of view):  VBS: 1.0 V [p-p]/75 Ω, composite signal, RCA jack
External I/O terminals:  ALARM IN 
ALARM OUT 
AUX OUT 
x1 each
Microphone/Line input:  ø3.5 mm monaural mini jack
    Input impedance: Approx. 2 kΩ
  For microphone input:  Applicable microphone: Plug-in power type
	 	 Supply	voltage:	2.5	V	±0.5	V
  For line input:  Input level: Approx. –10 dBV
Audio output:  ø3.5 mm stereo mini jack (monaural output)
    Output impedance: Approx. 600 Ω
    Line level
Dimensions:  ø129.5 mm x 93 mm (H) {5-3/32" x 3-21/32" (H)}
Weight:  WV-SF336: Approx. 410 g {0.82 lbs.}
    WV-SF335, WV-SF332: Approx. 370 g {0.82 lbs.}
Finish:  Main body: ABS resin, sail white
   Dome section: Clear acrylic resin
● Camera
Image sensor: 1/3 inch-type MOS image sensor
Effective pixels:  Approx. 1.3 megapixels
Scanning area:  4.80 mm (H) × 3.60 mm (V) {3/16" (H) × 5/32" (V)}
Scanning system:  Progressive
Minimum illumination:  WV-SF336 (1 280×960)
    WV-SF335 (1 280×960)
     Color:    0.3 lx {0.03 footcandle} (F1.4, Auto slow shutter: Off 
(1/30 s), AGC: High) 
0.019 lx {0.0019 footcandle} (F1.4, Auto slow shut-
ter: max. 16/30 s, AGC: High)*
     BW:    0.2 lx {0.02 footcandle} (F1.4, Auto slow shutter: Off 
(1/30 s), AGC: High) 
0.013 lx {0.0013 footcandle} (F1.4, Auto slow shut-
ter: max. 16/30 s, AGC: High)*
     * Converted value 
						

							40
   WV-SF332 (800×600)
     Color:    0.2 lx {0.02 footcandle} (F1.4, Auto slow shutter: Off 
(1/30 s), AGC: High) 
0.013 lx {0.0013 footcandle} (F1.4, Auto slow shut-
ter: max. 16/30 s, AGC: High)*
     BW:    0.13 lx {0.013 footcandle} (F1.4, Auto slow shutter: 
Off (1/30 s), AGC: High) 
0.009 lx {0.0009 footcandle} (F1.4, Auto slow shut-
ter: max. 16/30 s, AGC: High)*
     * Converted value
Wide dynamic range:  On/Off
Gain (AGC):  On(Low)/On(Mid)/On(High)/Off
Adaptive black stretch:  On/Off
Light control mode setting:  Indoor scene (50 Hz/60 Hz)/Outdoor scene/Fix shutter
Shutter speed:  Off(1/30), 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250, 
1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000
Auto slow shutter:  Off, Max. 2/30s, Max. 4/30s, Max. 6/30s, Max. 10/30s,  
Max. 16/30s
Simple black & white mode:  Off/AUTO
White balance:  ATW1/ATW2/AWC
Digital noise reduction:  High/Low
Video analytics
  Face detection:  On/Off (with the XML notification setting)
Privacy zone:  On/Off (up to 2 zones available)
Camera title on screen:  Up to 16 characters (alphanumeric characters, marks)
    On/Off
VMD alarm:  On/Off, 4 areas available
● Lens
Focal length: 2.8 mm - 10 mm {5/16" - 13/32"}
Maximum aperture ratio:  1:1.3 (WIDE) - 1:3.1 (TELE)
Angular field of view:  Horizontal: 27.7 ° (TELE) - 100.3 ° (WIDE)
    Vertical: 20.8 ° (TELE) - 73.5 ° (WIDE)
Adjusting angle:  Horizontal: 180 ° (clockwise), 170 ° (counterclockwise)
	 	 Vertical:	±75	°,	Image	tilt	adjustment	range:	±100	°
● Network
Network: 10BASE-T/100BASE-TX, RJ45 connector
Resolution:  Aspect ratio: 4:3
(WV-SF336, WV-SF335)  H.264   1 280 × 960/VGA (640 × 480)/QVGA (320 × 240), 
max. 30 fps
    MPEG-4 VGA (640 × 480)/QVGA (320 × 240), max. 30 fps
    JPEG   1 280 × 960/VGA (640 × 480)/QVGA (320 × 240), 
max. 30 fps
    Aspect ratio: 16:9
    H.264 1 280 × 720/640 × 360/320 × 180, max. 30 fps
    JPEG 1 280 × 720/640 × 360/320 × 180, max. 30 fps
    * MPEG-4 is not supported.