Panasonic Wv Q151s Operating Instructions Manual

							11
FRONT
LOCK
F
R
O
N
T
FRONT
LOCK
F
R
O
N
T
Projections Hooks for the
decorative cover
*1 position on the
rear side
START
END
FRONT
FRONT
LOCK
Mounting base
Camera mounting plate
Align Awith A
Align Bwith B
Fixing screw to be used for cover fall prevention
14. Mount the camera mounting plate on
the mounting base.
qAlign the marks (Ato Aand Bto
B) between the camera mounting
plate and mounting base.
wMount the camera mounting plate on
the mounting base with aligning gof
the camera mounting plate with
STARTh of the mounting base.
eTurn the camera mounting plate until
gof the camera mounting base
aligns with ENDh of the mounting
base.
rTighten the 3 screws that were
removed in Step 2.
(Recommended tightening torque:
1.6 N·m {16 kgf·cm})
Important:Do not let the cables be
caught during installation work.
15. Mount the decorative cover.
qMount the decorative cover on the
camera mounting plate with engag-
ing the projections of the decorative
cover with the hooks for the decora-
tive cover.
wTurn the decorative cover clockwise
while pressing the projections
upward and the cover is locked.
Important:The mark, FRONT, shall be
aligned with the Panasonic logo.
16. Tighten the fixing screw to be used for
cover fall prevention.
(Recommended tightening torque:
1.6 N·m {16 kgf·cm})
Note:When the camera lens is pointed in the horizontal direction, the inner shell interferes
with the camera’s view, and consequently about upper half of the monitor screen is
hidden in the WIDE mode.  
						

							Specifications
Ambient temperature: –10 °C- + 50 °C {14 °F - 122 °F}
Dimensions: 185 mm {7-5/16} in diameter x 145 mm {6-7/16} in height 
Weight: Approx. 800 g{1.77 lbs.}
Finish:  Main body: Treatment steel
Decorative cover: ABS resin with silver metallic coating
Dome cover: Acrylic resin
Standard Accessories
Operating Instructions (this book)  ............................. 1 pc.
The following are for installation
Safety wire  ................................................................. 1 pc.
Safety wire angle  ....................................................... 1 pc.
Template A  ................................................................ 1 sheet
Template B  ................................................................ 1 sheet
Inner shell  .................................................................. 1 pc.
© 2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
NM0806-2106 3TR004559CAA       Printed in Japan For European and other fields:
Matsushita Electric Industrial Co., Ltd.Osaka, Japan
http://panasonic.net For U.S., Canadian and Puerto Rican fields:
Panasonic System Solutions Company, 
Unit Company of Panasonic Corporation of North America
Security Systems 
www.panasonic.com/security
For customer support, call 1.877.733.3689
Executive Office: Three Panasonic Way 2H-2, Secaucus, 
New Jersey 07094
Zone Office
Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 
Central: 1707 N. Randal Road, Elgin, IL 60123 
Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 
Western: 6550 Katella Ave., Cypress, CA 90630 
Panasonic Canada Inc.5770 Ambler Drive,Mississauga, 
Ontario, L4W 2T3 Canada (905)624-5010
http://www.panasonic.ca
Panasonic Sales Company
Division of Panasonic Puerto Rico Inc.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina
P.R. 00985(809)750-4300