Panasonic Wv Pb4164 Instructions Manual

1
Data Multiplex Board
Instructions
Model No.  WVPB4164
B
efore attempting to connect or operate this product, 
please read these instructions carefully and save this manual for future use.
Features
The Data Multiplex Board, WVPB4164, is an optional board to be installed in the Digital Disk Recorder, WJRT416.
Installation of this board allows users to control 4 cameras through coaxial communication cables. 
Precautions
Unplug the power cord from the WJRT416 before
installing the board.
This board is...

2
Limitation of Liability
THIS PUBLICATION IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHE\
R EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,\
 FITNESS FOR ANY PAR-
TICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL E\
RRORS. CHANGES
ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS O\
F THIS PUBLICATION
AND/OR THE CORRESPONDING PRODUCT (S)....

3
Installations
zRemove the screws and slide the cover backward to detach the cover from \
the body.

xRemove the 4 screws securing the Data Multiplex Board.

MPX board 

4

4-pin connector
8-pin connector
Codec board
Data Multiplex board
CPU board
13-pin connector
12-pin connector

Extension Data Multiplex board (this unit)
Stud

cConnect the blue connectors of 12-pin and 13-pin cables that are supplie\
d to the corresponding blue connectors
of the CODEC board below the Data Multiplex Board. Then, connect the blu\
e connectors of 4-pin and 8-pin
cables that are supplied to the corresponding blue connectors of the CPU\
 board. 
vSet all the switches (S1 - S4) on the main...

5

4-pin connector
8-pin connector
13-pin connector
12-pin connector

nConnect the other side connectors of the cables that were connected in t\
he step 3 to the corresponding connec-
tors of the additional Data Multiplex Board. 
mSlide the cover back to the original position and secure the cover with \
the screws.  

6
Setup
• Check the menu of the WJ-RT416 to see whether the board has been success\
fully installed. 
• Refer to the operating instructions of the Digital Disk Recorder WJ-RT41\
6 for further information.
Specifications
Operating Temperature: From +5 °C {41 °F} to +45 °C {113 °F}
Dimensions: 170 mm (W) x 120 mm (H) x 14 mm (D){6-11/16 (W) x 4-3/4 (H) x 9/16 (D)}
Weight: 110  g{0.24 lbs.}
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
Standard...

7
Information on Disposal for Users of Waste Electrical & Electronic Equip\
ment (private households)
This symbol on the products and/or accompanying documents means that use\
d electrical and electronic prod-
ucts should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products\
 to designated collection points,
where they will be accepted on a free of charge basis. Alternatively, in\
 some countries you may be able to
return your products to...

For U.S., Canadian and Puerto Rican fields:
Panasonic System Solutions Company, 
Unit Company of Panasonic Corporation of North America
Security Systems
www.panasonic.com/security
For customer support, call 1.877.733.3689
Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094
Zone Office
Eastern:  Three Panasonic Way, Secaucus, New Jersey 07094
Central:  1707 N. Randal Road, Elgin, IL 60123
Southern:  1225 Northbrook Parkway, Suwanee, GA 30024
Western:  6550 Katella Ave., Cypress, CA...