Panasonic Wv Np244 Network Operating Instructions Manual
Have a look at the manual Panasonic Wv Np244 Network Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 44
Configure the schedule settings of the FTP periodic transmission [Schedu\
le setup]
Click the [FTP] tab on the Network setup page. (☞page 16)
The schedule settings of the FTP periodic transmission can be configured\
on this page. Refer to page 43 for further
information about the settings relating to the FTP periodic transmission\
.
44
How to configure the schedule settings
Step 1
Check the check box of the desired day of the week.
→The selected day of the week will be validated for the
schedule....](http://img.usermanuals.tech/thumb/58/68507/w64_wv-np244-network_en_om_d-43.png "Page 44
Configure the schedule settings of the FTP periodic transmission [Schedu\
le setup]
Click the [FTP] tab on the Network setup page. (☞page 16)
The schedule settings of the FTP periodic transmission can be configured\
on this page. Refer to page 43 for further
information about the settings relating to the FTP periodic transmission\
.
44
How to configure the schedule settings
Step 1
Check the check box of the desired day of the week.
→The selected day of the week will be validated for the
schedule....")
![Page 45
45
Maintenance of the camera [Maintenance]
System log check, firmware upgrade, and initialization of the setup menu\
can be performed on this page.
The Maintenance page has 3 tabs of the [System log] tab, the [Upgrade]\
tab and the [Initialization] tab.
Check the system log [System log]
Click the [System log] tab of the Maintenance page. (☞page 16)
Up to 4000 system logs can be saved on the SD memory card when the SD me\
mory card is inserted after selecting
Use for About the SD memory card on the...](http://img.usermanuals.tech/thumb/58/68507/w64_wv-np244-network_en_om_d-44.png "Page 45
45
Maintenance of the camera [Maintenance]
System log check, firmware upgrade, and initialization of the setup menu\
can be performed on this page.
The Maintenance page has 3 tabs of the [System log] tab, the [Upgrade]\
tab and the [Initialization] tab.
Check the system log [System log]
Click the [System log] tab of the Maintenance page. (☞page 16)
Up to 4000 system logs can be saved on the SD memory card when the SD me\
mory card is inserted after selecting
Use for About the SD memory card on the...")
![Page 46
46
Upgrade the firmware [Upgrade]
Click the [Upgrade] tab of the Maintenance page. (☞page 16)
The current firmware can be checked and upgraded to the latest version o\
n this page. Contact the dealer for further
information about the firmware upgrade.
[Model No. ], [MAC address], [Firmware version],
[IPL version]
Information of each item will be displayed.
How to upgrade the firmware
Step 1
Contact the dealer and download the latest firmware
onto a PC.
Step 2
Click the [Browse…] button and designate...](http://img.usermanuals.tech/thumb/58/68507/w64_wv-np244-network_en_om_d-45.png "Page 46
46
Upgrade the firmware [Upgrade]
Click the [Upgrade] tab of the Maintenance page. (☞page 16)
The current firmware can be checked and upgraded to the latest version o\
n this page. Contact the dealer for further
information about the firmware upgrade.
[Model No. ], [MAC address], [Firmware version],
[IPL version]
Information of each item will be displayed.
How to upgrade the firmware
Step 1
Contact the dealer and download the latest firmware
onto a PC.
Step 2
Click the [Browse…] button and designate...")
![Page 47
47
Initialize/restart the camera [Initialization]
Click the [Initialization] tab of the Maintenance page. (☞page 16)
Initialization of the setup data and HTML files of the camera and restar\
ting of the camera can be performed on this
page.
[Initialize setup data]
Click the [Execute] button to reset the settings to the
default settings. However, the network settings will not
be reset.
It is impossible to operate the camera for around 1
minute after the initialization.
[Initialize HTML data]
Click the...](http://img.usermanuals.tech/thumb/58/68507/w64_wv-np244-network_en_om_d-46.png "Page 47
47
Initialize/restart the camera [Initialization]
Click the [Initialization] tab of the Maintenance page. (☞page 16)
Initialization of the setup data and HTML files of the camera and restar\
ting of the camera can be performed on this
page.
[Initialize setup data]
Click the [Execute] button to reset the settings to the
default settings. However, the network settings will not
be reset.
It is impossible to operate the camera for around 1
minute after the initialization.
[Initialize HTML data]
Click the...")
![Page 50
50
•Are the set IP addresses valid?
•Is the LAN cable (category 5) is firmly connected to the
network connector on the rear of the camera?
Troubleshooting
Before asking for repairs, check the symptoms with the following table. \
Contact your dealer if a problem cannot be solved even after checking an\
d trying the solution or if the problem is not
described below.
• Is the same IP address provided to other devices?
Are there contradictions between the address and the
network subnet to be accessed?
Are...](http://img.usermanuals.tech/thumb/58/68507/w64_wv-np244-network_en_om_d-49.png "Page 50
50
•Are the set IP addresses valid?
•Is the LAN cable (category 5) is firmly connected to the
network connector on the rear of the camera?
Troubleshooting
Before asking for repairs, check the symptoms with the following table. \
Contact your dealer if a problem cannot be solved even after checking an\
d trying the solution or if the problem is not
described below.
• Is the same IP address provided to other devices?
Are there contradictions between the address and the
network subnet to be accessed?
Are...")
![Page 52
•This may occur due to the display adapter and driver
combination.
When this occurred, update the driver of the display
adapter to the latest version first.
If updating the driver does not solve the problem,
adjust the hardware acceleration as follows.
1. Right-click on the desktop and select Properties from the displayed pop-up menu.
2. Select Settings from Display Properties, and then click the [Advanced] button.
3. Click the [Troubleshoot] tab and disable the DirectDraw acceleration by adjusting the...](http://img.usermanuals.tech/thumb/58/68507/w64_wv-np244-network_en_om_d-51.png "Page 52
•This may occur due to the display adapter and driver
combination.
When this occurred, update the driver of the display
adapter to the latest version first.
If updating the driver does not solve the problem,
adjust the hardware acceleration as follows.
1. Right-click on the desktop and select Properties from the displayed pop-up menu.
2. Select Settings from Display Properties, and then click the [Advanced] button.
3. Click the [Troubleshoot] tab and disable the DirectDraw acceleration by adjusting the...")
![Page 53
•Click the information bar and select Always Allow
Pop-ups from This Site…. The dialog window saying
Allow pop-ups from this site? will be displayed. Click
the [Yes] button.
53
When using a PC on which Windows XP Service Pack2 (SP2) is installed
The following may occur during operation when using a PC on which Window\
s XP Service Pack2 (SP2) is installed.
Follow the instructions below when the following occurred. By performing\
the following solutions, other applications
and the security level may not...](http://img.usermanuals.tech/thumb/58/68507/w64_wv-np244-network_en_om_d-52.png "Page 53
•Click the information bar and select Always Allow
Pop-ups from This Site…. The dialog window saying
Allow pop-ups from this site? will be displayed. Click
the [Yes] button.
53
When using a PC on which Windows XP Service Pack2 (SP2) is installed
The following may occur during operation when using a PC on which Window\
s XP Service Pack2 (SP2) is installed.
Follow the instructions below when the following occurred. By performing\
the following solutions, other applications
and the security level may not...")
•Depending on the version of your browser, there might be difficulties refreshing the picture and operating the camera. It is recommended to use Internet Explorer 6.0 SP2. • Depending on the traffic of the network or the concen- tration of access to the camera, there might be difficul- ties displaying the camera picture. Click the reload but- ton of the browser to request the camera picture to be refreshed. • Is the focus adjusted correctly? Check if the focus is adjusted correctly. • Is the viewer software installed on a PC? Install the viewer software on a PC. • Is the power of the camera on? Check if the power of the camera is turned on. 51 •Aren’t there dusts or dirt on the lens? Check if there are dust or dirt on the lens. •Is the lens cap detached? Check if the lens cap is detached. Cannot access from the browser. No image is displayed. Operating instructions Operating instructions Reference pages Cause/solutionSymptom – Images are displayed blurry. The image is not being refreshed. Operating instructions Operating instructions – –
•This may occur due to the display adapter and driver combination. When this occurred, update the driver of the display adapter to the latest version first. If updating the driver does not solve the problem, adjust the hardware acceleration as follows. 1. Right-click on the desktop and select Properties from the displayed pop-up menu. 2. Select Settings from Display Properties, and then click the [Advanced] button. 3. Click the [Troubleshoot] tab and disable the DirectDraw acceleration by adjusting the level of Hardware acceleration. 52 Reference pages Cause/solutionSymptom When displaying MPEG-4 images on two browser win- dows or more, images from two cameras or more are dis- played in sequence on a sin- gle browser window. – d
•Click the information bar and select Always Allow Pop-ups from This Site…. The dialog window saying Allow pop-ups from this site? will be displayed. Click the [Yes] button. 53 When using a PC on which Windows XP Service Pack2 (SP2) is installed The following may occur during operation when using a PC on which Window\ s XP Service Pack2 (SP2) is installed. Follow the instructions below when the following occurred. By performing\ the following solutions, other applications and the security level may not be affected. The Information Bar expressed in the following symptom and solutions w\ ill be displayed just below the address bar only when there is information to communicate. The following message is displayed on the information bar. Pop-up blocked. To see this pop-up or additional options, click here… – Reference pages SolutionsSymptom Information Bar • Click Internet Options on the Tools menu of Internet Explorer, and then click the [Security] tab. Then, click the [Custom Level…] button to open the Security Setting window. Under Miscellaneous, select Enable for Allow script-initiated windows without size or position constraints. Click the [OK] button. The Warning window will be displayed. Click the [Yes] button. Unnecessary status bar or scroll bar is displayed on the pop-up window. –
Panasonic Canada Inc.5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca Panasonic Sales CompanyDivision of Panasonic Puerto Rico Inc.San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina P.R. 00985(809)750-4300 Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North AmericaSecurity Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N. Randal Road, Elgin, IL 60123 Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 Western: 6550 Katella Ave., Cypress, CA 90630 © 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. N1105-3066 3TR004165 DAA Printed in Japan