Panasonic Wv Np1004 Operating Instructions Manual
Have a look at the manual Panasonic Wv Np1004 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 63
63
Set the privacy zone
When there is a zone that is not to be displayed, set the zone as a priv\
acy zone to not to display.
Up to 8 privacy zones can be set.
Step 1
Move the cursor onto PRIVACY ZONE on the CAM-
ERA SETUP page and press the [SET] button after
selecting ON (1) or ON (2).
→The zone number selection page will be displayed.
Step 2
Confirm that the cursor is on 1 of 1/8 displayed on
the top of the page, and then press the [Left] button or
[Right] button to select the desired zone number....](http://img.usermanuals.tech/thumb/58/68505/w64_wv-np1004-network_en_om_d-62.png "Page 63
63
Set the privacy zone
When there is a zone that is not to be displayed, set the zone as a priv\
acy zone to not to display.
Up to 8 privacy zones can be set.
Step 1
Move the cursor onto PRIVACY ZONE on the CAM-
ERA SETUP page and press the [SET] button after
selecting ON (1) or ON (2).
→The zone number selection page will be displayed.
Step 2
Confirm that the cursor is on 1 of 1/8 displayed on
the top of the page, and then press the [Left] button or
[Right] button to select the desired zone number....")
![Page 64
64
Step 1
Select ON for EL-ZOOM on the CAMERA SETUP
page.
→The EL-ZOOM page will be displayed.
Step 2
Move the cursor onto ZOOM and press the [SET] but-
ton.
→Images to which zooming can be applied will be dis-
played.
Step 3
Adjust zooming level pressing the [Up] and [Down] but-
tons. After completing the adjustment, press the [SET]
button.
→The EL-ZOOM page will be displayed.
Step 4
Move the cursor onto PAN/TILT and press the [SET]
button.
→Images to which panning/tilting can be applied will
be...](http://img.usermanuals.tech/thumb/58/68505/w64_wv-np1004-network_en_om_d-63.png "Page 64
64
Step 1
Select ON for EL-ZOOM on the CAMERA SETUP
page.
→The EL-ZOOM page will be displayed.
Step 2
Move the cursor onto ZOOM and press the [SET] but-
ton.
→Images to which zooming can be applied will be dis-
played.
Step 3
Adjust zooming level pressing the [Up] and [Down] but-
tons. After completing the adjustment, press the [SET]
button.
→The EL-ZOOM page will be displayed.
Step 4
Move the cursor onto PAN/TILT and press the [SET]
button.
→Images to which panning/tilting can be applied will
be...")
![Page 65
65
Correct image defects (blemishes) such as scratches
Image defects (blemishes) such as scratches can be corrected in the fo\
llowing method.
Step 1
Press the [SET] button after moving the cursor onto
PIX OFF on the SPECIAL SETUP page.
→The PIX OFF page will be displayed.
Step 2
Press the [SET] button after selecting a number (1 – 16)
to be registered as a blemish compensation point.
→The blemish compensation point setting window will
be displayed.
Step 3
Press the [SET] button after moving the cross...](http://img.usermanuals.tech/thumb/58/68505/w64_wv-np1004-network_en_om_d-64.png "Page 65
65
Correct image defects (blemishes) such as scratches
Image defects (blemishes) such as scratches can be corrected in the fo\
llowing method.
Step 1
Press the [SET] button after moving the cursor onto
PIX OFF on the SPECIAL SETUP page.
→The PIX OFF page will be displayed.
Step 2
Press the [SET] button after selecting a number (1 – 16)
to be registered as a blemish compensation point.
→The blemish compensation point setting window will
be displayed.
Step 3
Press the [SET] button after moving the cross...")
![Page 68
68
Troubleshooting
Before asking for repairs, check the symptoms with the following table
Contact your dealer if a problem cannot be solved even after checking an\
d trying the solution or if the problem is not
described below.
•Is the LAN cable (category 5) is firmly connected to
the network connector on the rear of the camera?
•Is the link LED right by the network connector lit?
When it is not lit, connection to a LAN may not be
established or a network may be not working correct-
ly. Check if the...](http://img.usermanuals.tech/thumb/58/68505/w64_wv-np1004-network_en_om_d-67.png "Page 68
68
Troubleshooting
Before asking for repairs, check the symptoms with the following table
Contact your dealer if a problem cannot be solved even after checking an\
d trying the solution or if the problem is not
described below.
•Is the LAN cable (category 5) is firmly connected to
the network connector on the rear of the camera?
•Is the link LED right by the network connector lit?
When it is not lit, connection to a LAN may not be
established or a network may be not working correct-
ly. Check if the...")
![Page 71
•This may occur due to the display adapter and driver
combination.
When this occurred, update the driver of the display
adapter to the latest version first.
If updating the driver does not solve the problem,
adjust the hardware acceleration as follows.
1. Right-click on the desktop and select Properties from the displayed pop-up menu.
2. Select Settings from Display Properties, and then click the [Advanced] button.
3. Click the [Troubleshoot] tab and disable the DirectDraw acceleration by adjusting the...](http://img.usermanuals.tech/thumb/58/68505/w64_wv-np1004-network_en_om_d-70.png "Page 71
•This may occur due to the display adapter and driver
combination.
When this occurred, update the driver of the display
adapter to the latest version first.
If updating the driver does not solve the problem,
adjust the hardware acceleration as follows.
1. Right-click on the desktop and select Properties from the displayed pop-up menu.
2. Select Settings from Display Properties, and then click the [Advanced] button.
3. Click the [Troubleshoot] tab and disable the DirectDraw acceleration by adjusting the...")
![Page 72
72
When using a PC on which Windows XP Service Pack2 (SP2) is installed
The following may occur during operation when using a PC on which Window\
s XP Service Pack2 (SP2) is installed.
Follow the instructions below when the following occurred. By performing\
the following solutions, other applications
and the security level may not be affected.
The Information Bar expressed in the following symptom and solutions w\
ill be displayed just below the address bar
only when there is information to...](http://img.usermanuals.tech/thumb/58/68505/w64_wv-np1004-network_en_om_d-71.png "Page 72
72
When using a PC on which Windows XP Service Pack2 (SP2) is installed
The following may occur during operation when using a PC on which Window\
s XP Service Pack2 (SP2) is installed.
Follow the instructions below when the following occurred. By performing\
the following solutions, other applications
and the security level may not be affected.
The Information Bar expressed in the following symptom and solutions w\
ill be displayed just below the address bar
only when there is information to...")
•This may occur due to the display adapter and driver combination. When this occurred, update the driver of the display adapter to the latest version first. If updating the driver does not solve the problem, adjust the hardware acceleration as follows. 1. Right-click on the desktop and select Properties from the displayed pop-up menu. 2. Select Settings from Display Properties, and then click the [Advanced] button. 3. Click the [Troubleshoot] tab and disable the DirectDraw acceleration by adjusting the level of Hardware acceleration. – 71 d Reference pages Cause/solutionSymptom When displaying MPEG4 images on two browser win- dows or more, images from two cameras or more are dis- played in sequence on a sin- gle browser window.
72 When using a PC on which Windows XP Service Pack2 (SP2) is installed The following may occur during operation when using a PC on which Window\ s XP Service Pack2 (SP2) is installed. Follow the instructions below when the following occurred. By performing\ the following solutions, other applications and the security level may not be affected. The Information Bar expressed in the following symptom and solutions w\ ill be displayed just below the address bar only when there is information to communicate. Information Bar •Click the information bar and select Always Allow Pop-ups from This Site…. The dialog window saying Allow pop-ups from this site? will be displayed. Click the [Yes] button. •Click Internet Options on the Tools menu of Internet Explorer, and then click the [Security] tab. Then, click the [Custom Level…] button to open the Security Setting window. Under Miscellaneous, select Enable for Allow script-initiated windows without size or position constraints. Click the [OK] button. The Warning window will be displayed. Click the [Yes] button. Reference pages Solutions – –Symptom The following message is displayed on the information bar. Pop-up blocked. To see this pop-up or additional options, click here… Unnecessary status bar or scroll bar is displayed on the pop-up window.
Panasonic Canada Inc.5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca Panasonic Sales CompanyDivision of Panasonic Puerto Rico Inc.San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina P.R. 00985(809)750-4300 Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North AmericaSecurity Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N. Randal Road, Elgin, IL 60123 Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 Western: 6550 Katella Ave., Cypress, CA 90630 © 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. N1105-2036 3TR004128CAA Printed in Japan