Panasonic Wv Np1004 Operating Instructions Manual

							11
Transmit Images onto an FTP Server
Images can be transmitted to an FTP server. By configuring the following\
 settings, transmission of images captured
at an alarm occurrence or captured at a designated interval to an FTP se\
rver will become available.
Important:
When using this function, set the user name and password to restrict use\
rs who can log into the FTP server. 
T ransmit an alarm image at an alarm occurrence (Alarm image
FTP transmission)
An alarm image can be transmitted at an alarm occurrence to the FTP serv\
er. To transmit alarm images to an FTP
server, it is necessary to configure the settings in advance. 
The settings for the FTP server can be configured on the [FTP] tab of th\
e Server setup page. (
☞page 40)
The alarm image FTP transmission function can be turned on/off on the [A\
larm] tab of the Alarm setup page. 
(
☞page 31)
Note:
Depending on the network traffic, number of the transmitted images may n\
ot reach the set number of images to
be transmitted.
T ransmit images at a designated interval or period (FTP periodic
transmission)
Images can be transmitted at a designated interval or period. To transmi\
t images at a designate interval or period, it
is necessary to configure the settings in advance. 
The settings for the FTP server can be configured on the [FTP] tab of th\
e Server setup page. (
☞page 40)
On the [FTP] tab of the Network setup page, the FTP periodic transmiss\
ion function can be turned on/off, and the
settings relating to schedules (periods) can be configured. (
☞page 45)
Notes:
• Depending on the network line speed or the network traffic, images may n\
ot be transmitted at the exact designat-
ed interval or period. 
•W hen ON is selected for both of the alarm image FTP transmission functi\
on and the FTP periodic transmission
function, the alarm image FTP transmission function will be given priori\
ty over the FTP periodic transmission
function. For this reason, images may not be transmitted at the exact de\
signated interval or period if alarms
occur frequently.  
						

							Save images on the SD memory card when failed to transmit
images by the FTP periodic transmission function
Images failed to transmit by the FTP periodic transmission can be saved \
automatically on the SD memory card. To
obtain the images saved on the SD memory card, use the Windows command p\
rompt or FTP client software. The
obtained images can be browsed on a PC. 
Important:
We make no guarantee for any damages of files on the SD memory card incu\
rred by mulfunction or error occur-
rence in files saved in the SD memory card regardless of what the cause \
may be. 
Note:
When using the SD memory REC function of a Panasonic’s network disk\
 recorder, select OFF for the FTP
periodic transmission function. (
☞page 45)
Save images on the SD memory card
By configuring the following settings, saving images which had been fail\
ed to transmit to the FTP server using the
FTP periodic transmission function will become available.
About SD memory card:Use (☞page 22)
File name:With time and date (☞page 45)
Obtain images on the SD memory card
Step 1
Access the camera using the Windows command prompt or FTP client softwar\
e.
→The window with the user name and password entry fields will be displaye\
d. 
Step 2
Enter the user name whose access level is 1. Administrator and its pas\
sword.
→Log in the camera.
Note:
To enhance the security, it is recommended to change the password for th\
e administrator periodically. Refer to
page 37 for descriptions of how to change the password.
12 
						

							13
Step 3
Move the current directory to drive B and obtain images. 
Notes:
•When logging in the camera, the current directory will be drive D. Images\
 on the SD memory card can be found
in the FTP directory under drive B. Move to the FTP directory and ob\
tain images.

Example:To obtain the image (img_05010101230000.jpg) using the Windows command\
 prompt
1. Enter c:\>ftp 192.168.0.10 and press the [Enter] key.
→FTP connection will be established with 192.168.0.10.
2. Log in by entering the user name and the password.
3. Enter ftp>cd B:\FTP(101\
3 and press the [Enter] key.
→The current directory will be B:\FTP(101\
3.
4. Enter ftp>bin and press the [Enter] key.
→The transfer mode will be set to the binary mode.
5. Enter ftp>get img_05010101230000.jpg and press the [Enter] key.
→The image will be obtained.
6. Log out by entering ftp>bye and press the [Enter] key.
• It is possible to delete images on the SD memory card using the Windows \
command prompt, etc.
Drive B FTP
LOG050101
050102
0123
Directory
Directory 
(year/month/day) Directory 
(hour/minute)
:
: :
:
:
:
:
:
←
 Destination of logs to be saved ↑
 The image will be saved here.
An image failed to transmit by the FTP 
periodic transmission function
(Example) img_05010101230000.jpg 
						

							14
About the Network Security of the Camera
Equipped security functions
The following security functions are featured in this camera.
qAccess restrictions by the host authentication and the user authenticati\
on
It is possible to restrict users from accessing the camera by setting th\
e host authentication and/or the user
authentication to on. (
☞pages 37 and 38)
wAccess restrictions by changing the HTTP port
It is possible to prevent illegal access such as port scanning, etc. by \
changing the HTTP port number. 
(
☞page 42)
Note:
When failed to pass the user authentication (authentication error) usi\
ng the same IP address (PC) for a certain
times within 5 minutes, access to the camera will be denied for a while.\
 
Important:
Design and enhance security countermeasures to prevent leakage of inform\
ation such as image data, authenti-
cation information (user name and password), alarm mail information, F\
TP server information, DDNS server
information, etc. 
						

							15
Display the Setup Menu and Configure the Settings of the Camera Using a \
PC
The following are descriptions of how to configure the settings on the S\
ETUP menu.
The setup menu is operable by only users whose access level is 1. Admin\
istrator. 
How to display the setup menu
Step 1
Display the Live page. (☞page 5)
Step 2
Click the [Setup] button on the Live page. 
→The window with the user name and password entry
fields will be displayed. 
Step 3
Click the [OK] button after entering the user name and
the password.
→Click this button to display the setup menu. Refer to the next page for further information about
this menu. 
						

							16
How to operate the setup menu
Step 1
Click the desired button in the frame on the left of the
window to display the respective setup menu.
When there are tabs at the top of the setup page dis-
played in the frame on the right of the window, click the
desired tab to display and configure the setting items
relating to the name of the tab.
Step 2
Complete each setting item displayed in the frame on
the right of the window. 
Step 3
After completing each setting item, click the [SET] but-
ton to apply them. 
Note:
When there are two [SET] buttons or more on the
page, click the respective button to the edited setting
item. 
When completing the setting items in field A, click
the [SET] button below field A (A-1). The edited set-
ting items in field A will not be applied unless the
[SET] button below field A (A-1) is clicked.
In the same manner above, click the [SET] button
below field B (B-1) when completing the setting
items in field B. 
A
A-1
B B-1 
						

							17
About the operation window
q[Live] button
Click this button to display the Live page.
w[Basic setup] button
Click this button to display the Basic setup page.
The basic settings such as time and date, camera
name, and the settings relating to the NTP server
and the SD memory card can be configured on the
Basic setup page. Refer to page 19 for further
information.
e[Camera setup] button
Click this button to display the Camera setup page.
The settings relating images and audio such as
brightness and image quality can configured on this
page. Refer to page 23 for further information.
r[Multi-screen setup] button
Click this button to display the Multi-screen setup
page. The cameras to be used for the multi-screen
display can be registered on the Multi-screen setup
page. Refer to page 29 for further information.
t[Alarm setup] button
Click this button to display the Alarm setup page.
The settings relating to alarm occurrences such as
settings for the alarm action at an alarm occurrence,
the alarm occurrence notification, and the VMD area
settings can be configured on the Alarm setup
page. Refer to page 30 for further information.
y[Authentication setup] button
Click this button to display the Authentication setup
page. The settings relating to the authentication
such as users and PCs restrictions for accessing the
camera can be configured on the Authentication
setup page. Refer to page 37 for further
information.
u[Server setup] button
Click this button to display the Server setup page.
The settings relating to the mail server and the FTP
server to which the camera accesses can be
configured on the Server setup page. Refer to
page 39 for further information.
!2Main area
q[Live] button
w[Basic setup] button
e[Camera setup] button
r[Multi-screen] button
t[Alarm setup] button
y[Authentication setup]
button
u[Server setup] button
i[Network setup] button
o[Maintenance] button
!0[Help] button
!1Status display
area 
						

							18
i[Network setup] button
Click this button to display the Network setup page.
The network settings and the settings relating to
DDNS (Dynamic DNS), SNMP (Simple Network
management Protocol) and FTP (File Transfer
Protocol) can be configured on the Network setup
page. Refer to page 41 for further information.
o[Maintenance] button
Click this button to display the Maintenance page.
System log check, firmware upgrade and
initialization of the setup menu can be performed on
the Maintenance page. Refer to page 49 for further
information.
!0[Help] button
Click this button to display the Help page. 
!1Status display area
The name of the camera whose settings currently
being configured will be displayed.
!2Main area
Pages of each setup menu will be displayed. There
are tabs for some setup menus.  
						

							19
Configure the basic settings of the camera [Basic setup]
The basic settings such as time and date and camera name, and the settin\
gs relating to the NTP server and the SD
memory card can be configured on the Basic setup page. 
The Basic setup page has 3 tabs of the [Basic] tab, the [NTP] tab and \
the [SD memory card] tab. 
Configure the basic settings [Basic]
Click the [Basic] tab on the Basic setup page.
The settings such as the camera name, time and date, etc. can be configu\
red on this page. 
[Initial display image type]
Select JPEG or MPEG-4 to determine the type of
images to be displayed when accessing the camera.
Default:MPEG-4
[Camera title]
Enter the name of the camera. Click the [SET] button
after entering the name of the camera. The entered
name will be displayed in the status display area. 
Number of characters for the camera name:0 - 20
characters
Default:WV-NP1004
[Time and date setup]
Enter the current time and date. When 12-hours is
selected for Time display, AM or PM can be select-
ed. 
Available range:01/01/2005 0:00:00 – 
12/31/2035 23:59:59
Important:
Enter the current hour reflecting the selected time
display format.
[Time display]
Select 12-hours or 24-hours. Enter the current hour
reflecting this setting when entering the current time and
date for Time and date setup.
Default:24-hours
[Date/time display format]
Select a date/time display format.
When 01/04/2005 13:10:00 is set for Time and date
setup after selecting 24-hours for Time display, time
and date will be displayed as follows respectively. 
DD/MM/YYYY:01/04/2005 13:10
MM/DD/YYYY:04/01/2005 13:10
DD/Mmm/YYYY:01/Apr/2005 13:10
YYYY/MM/DD:2005/04/01 13:10
Mmm/DD/YYYY:Apr/01/2005 13:10
Default:MM/DD/YYYY
[Display position]
Determine whether or not to display the shooting date
and time, and the position of the date and time to be
displayed. 
OFF:No shooting date and time is displayed.
ON (Upper left):The shooting date and time will be dis-
played at the upper left corner of the image display
area.
ON (Lower left):The shooting date and time will be dis-
played at the lower left corner of the image display
area.
ON (Upper right):The shooting date and time will be
displayed at the upper right corner of the image dis-
play area.
ON (Lower right):The shooting date and time will be
displayed at the lower right corner of the image dis-
play area.
Default:OFF 
						

							20
[Daylight saving (Summertime)]
Select ON or OFF to determine whether or not to
apply daylight saving time.
ON:Applies summer time. An asterisk (*) will be dis-
played on the left side of the displayed time and
date.
OFF:Does not apply summer time.
Default:OFF
[Link/Access LED]
Select ON or OFF to determine whether or not to
light the link LED, the access LED of the network con-
nector, and the SD memory card error LED. 
Select ON to check the network status by lighting the
LEDs. Select OFF to turn off the LEDs at all times. 
However, the power indicator will light even when OFF
is selected.
Default:ON
Note: Link LED:
When ON is selected, this LED will light
when communication with the connected device
is available.
Access LED:When ON is selected, this LED will
light when accessing to a network.
SD memory card error LED:This LED will light
when it is impossible to write data on the SD
memory card.