Panasonic Wv Np1004 Operating Instructions Manual

Network camera
Network Operating Instructions 
Model No.WV-NP1004
PU SH  T O L OC
K/E JE C
T
WV-NP1004
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future\
 use.
(Lens is option.) 

2
Contents
Preface ................................................................\
............................................................ 3
About these operating instructions  ........................................................................\
...... 3
Trademarks and registered trademarks  ...................................................................... 3
Monitoring Images on a PC  ........................................................................\
..................... 4...

3
Preface
About these operating instructions
There are 2 sets of operating instructions for the WV-NP1004 as follows.\
•Operating Instructions
• Network Operating Instructions
These network operating instructions contain descriptions of how to oper\
ate this product using a PC via a network
and of how to configure the settings. These network operating instructio\
ns also contain descriptions of how to dis-
play the SETUP menu on the video monitor connected to the VIDEO OUT conn\
ector of the camera and...

4
Step 1
Start up the web browser.
Step 2
Enter the IP address designated using the Panasonic IP
setting software in the address box of the browser.
(Example: http://192.168.0.10)
Important:
•When the HTTP port number is changed from 80,
enter http://IP address of the camera + : (colon) +
port number in the address box of the browser, for
example http://192.168.0.11:8080.
• Configure the web browser to not use the proxy
server. Refer to the network administrator when
using the proxy server.
Step 3
Press...

5
About the Live page
q[Live] button
Click this button to display the Live page. Refer to
page 6 for descriptions of how to operate the Live
page.
w[Setup] button *1
Click this button to display the setup menu.
eMulti-screen buttons
Click the desired multiscreen (1-4 or 5-8) button to
display images on a multiscreen.
rImage type buttons
Click the desired button to change the image type to
be displayed. The selected button will turn green.
t
Image capture size buttons
The selected button will turn green...

6
Operation
Available operations when live images are displayed
*1 Operable by only users whose access level is 1. Administrator.
*2 Operable by only users whose access level is 1. Administrator or 2. C\
amera control when ON is selected for
User authentication (
☞page 37).
Refer to page 37 for further information about the access level.
Display the setup menu *1
Display images on a multi-
screen
Display MPEG-4 image
Display JPEG image 
The letters Setup on the button will turn green and the setup
menu...

Image capture size of the displayed image will be 1280 x 960
pixels. (Available only when Full scan is selected for Scan
mode)
Image capture size of the displayed image will be 960 x 720
pixels. (Available only when Partial scan is selected for
Scan mode)
Image capture size of the displayed image will be QVGA. 
7
Enlarge the displayed
images *2 Change image capture size
Change brightness *2Returns to the original display size (1x size).
Image will be darker.
Image will be displayed with the standard...

Turn on/off audio* The [Audio] button will be displayed only when ON is selected for M\
ic modeon the setup menu. (
☞page 28)
Display a still picture (one
shot)
When this button is clicked, the button will turn into the 
button and audio will not be heard.
When this button is clicked, a new window will open and the
still picture (one shot) displayed on the Live page will be dis-
played on it. 
To save this picture on a PC, right-click on the image and
select Save image as… on the displayed pop-up menu....

9
Monitor images from multiple cameras
Images from multiple cameras can be displayed on a multiscreen. Images f\
rom up to 4 cameras can be displayed
simultaneously. To display images on a multiscreen, it is necessary to r\
egister cameras in advance. 4 cameras can
be registered as a group and up to 2 groups (8 cameras) can be registe\
red. (
☞page 29)
Important:
•Select OFF for both the user authentication and the host authenticatio\
n of the camera to be registered. 
(
☞pages 37 and 38)
• Only JPEG...

10
Action at an Alarm Occurrence
The alarm action will be performed when the following alarm occur.
Alarm type
Terminal alarm: When connecting an alarm device such as a sensor to the alarm connector \
on therear of the camera, the alarm action will be performed when the connecte\
d alarm
device activated.
VMD alarm: When a motion is detected in the set VMD area, the alarm action will be \
performed. * VMD stands for Video Motion Detection.
Command alarm: When received a Panasonic alarm protocol from the...