Panasonic Wma Mp3 Cd Player Receiver Cq C5303 Operating Instructions

							11
10
E
N
G
L
I
S
H
CQ-C5303N
Clock Display (at Power off)
When the power of the unit is set to OFF, press [D]
(DISP). (ACC ON)
(Clock time) (Default)
(Display off)
When the power is set to ON, refer to the description for
each source mode.
Clock Setting
The 24-hour system is used for the clock.
Note:
¡Adjust the clock when 
“NO CT”appears on the screen.
Select the radio AM (LW/MW) mode. (aPage 12)
Frequency
Press and hold [D] (DISP)for more than 2 seconds.
Hour blinks
Adjust the hour.
[[]: put forward hour.
[]]: put back hour.
Hour entered
Press [D] (DISP).
Minute blinks
Adjust the minute.
[[]: put forward minute.
[]]: put back minute.
Minute entered
Press [D] (DISP).
Completed
Note:
¡When a broadcast of FM Radio Data System is received,
the clock is adjusted automatically by the Clock Time
service. (aPage 14) 
						

							q
Radio Mode
Press [SRC/PWR]to select the radio mode.
wBand
Press [BAND].
e
Tuning
[[]: Higher frequency
[]]: Lower frequency
Press and hold [[]or []]for more than 0.5
seconds, then release it. Seeking will start.Note:
¡For tuning in to only stations whose receiving condi-
tions are good in the seeking mode, set LOCAL to ON.
(aPage 30)
¡For reducing noise when a receiving FM stereo wave is
weak, set FM MONO to ON. (aPage 30)
Display Change
Press [D] (DISP)to change the display as follows.
3
AM (LW/MW)3FM (non RDS)
*Adjust the clock when 
“NO CT”appears on the screen.
(Clock setting aPage 11 )
12
11
E
N
G
L
I
S
H
CQ-C5303N
Radio
Band Frequency
Clock Time (CT)*
Frequency
Display Off
PS (Programme Service
Name)
Clock Time (CT)*
Frequency
Display Off
Preset number
[SRC/PWR] (Source)
[BAND] 
(APM: Auto Preset Memory)
Preset Buttons [1] to [6] (Preset station)
[]][[]
(TUNE)
(Stereo) indicator
[D] (DISP) (Display) 
						

							13
1
E
N
G
L
I
S
H
CQ-C5303N
Auto Preset Memory (APM)
With this operation, stations with good receiving condi-
tions can be automatically stored in the preset memory.
qSelect a band. (aPrevious page)
wPress and hold [BAND] (APM)for more than 2 sec-
onds.
6 stations with first to 6th highest in signal strength will
be preset to each band.
Once set, the preset stations are sequentially scanned
for 5 seconds each. (scanning)
Note:
¡To stop scanning, press one of the buttons from [1]to
[6].
¡Only RDS stations will be saved at default setting (AF
ON). To select non-RDS stations, set AF to
OFF.(aPage 15)
Manual Preset Memory
With this operation, a station can be manually stored in the
preset memory.
qSelect a band and frequency. (aPrevious page)
wPress and hold one of the preset buttons from [1]to [6]
until the display blinks once.
Preset number
12
Station Preset
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.
Note:
¡New stations overwrite existing saved stations after these procedures.
Warning
¡To ensure safety, never attempt to preset stations while you are driving.
Preset Station Calling
qSelect a band. (aPrevious page)
wPress one of the preset buttons from [1]to [6]. 
						

							14
13
E
N
G
L
I
S
H
CQ-C5303N
Radio Data System (RDS)
RDS Basics
Some FM stations are broadcasting added data compatible with RDS. This unit offers convenient functions using such data.
RDS service availability varies with areas. Please understand if RDS service is not available in your area, the following serv-
ice is not available, either. This chapter explains the summary and operation regarding RDS.
The following functions are available when receiving RDS stations.
Programme Service Name (PS)
Display
The name of the station is displayed.
Alternative Frequency (AF)
When reception is poor, an RDS station broadcasting the
same programme is tuned in automatically.
Traffic Programme (TP)
Some RDS FM stations periodically provide a traffic
announcement.
Stations which broadcast the traffic announcement are
called Traffic Programme (TP).
Traffic Announcement (TA)
Radio announcements on traffic conditions.
Clock Time (CT) Service
When receiving an RDS station, the CT service automatical-
ly adjusts the time.
“NO CT”is displayed in areas where CT service is not avail-
able. (aPage 11 for Clock Setting)
Programme Type (PTY) Display
RDS FM stations provide a programme type identification
signal.
Example: news, rock, classical music, etc. (aPage 17)
Programme Identification (PI)
Each programme has its own number. This may be used to
search for another frequency on which the same pro-
gramme is broadcast.
Region (REG)
Each region has its own number. This may be used to
identify the region where the station you are now listening
to is located. 
						

							15
14
E
N
G
L
I
S
H
CQ-C5303N
Alternative Frequency (AF)
Alternative Frequency (AF)
Mode  
Press and hold [TA] (AF)for more than 2 seconds to
select one of the following AF modes.
AF ON :AF, Best Station Research and PI seek function
are active.  
AF OFF : When the AF network of an RDS station is not
required.
: Low level AF operating sen-
sitivity. (Default)
: High level AF operating sen-
sitivity.
: When the AF network of an
RDS station is not required.
Display Change
Press [D] (DISP)to change the display as follows.
Preset Memory (AF ON Setting)
Preset Station Calling (Best Station Research)
AF self-tuning allows you to select a station with good
reception from the same network when the preset tuning is
activated.
For Poor Reception (PI Seek)
If reception becomes poor when tuning in a preset station,
press the same preset number button. The same station
with better reception will be searched for.
Press the same preset number button again to cancel.
Note:
¡For PI Seek, cancel the TA mode first, then execute PI
Seek.
[TA] (AF:Alternative Frequency)
[D] (DISP) (Display) indicator
Frequency
Clock Time
PS (Programme Service Name) (Default)
Display Off 
						

							16
15
E
N
G
L
I
S
H
CQ-C5303N
Traffic Announcement (TA)
Some RDS FM stations periodically provide traffic information.
Radio Data System (RDS) (continued)
TA ON/OFF  (Default: OFF)
Press [TA]to switch the TA mode on and off.
The following functions are available when the TA mode is
active.
¡A TP station is automatically searched for and received
at the instant of toggling the TA mode on if you are
receiving a non-TP station or a TP station with poor
reception.
¡When executing seek tuning or APM, only TP stations
are selected. (aPage 13 for Auto Preset Memory)
¡Setting to TA on with the unit in another mode, it will
automatically switch to radio mode and a traffic
announcement is broadcast on the radio when the traf-
fic announcement begins. The traffic announcement
having finished, the unit will return to the previous
mode. (TA standby mode)Traffic information only (TA mute)
While listening to an FM station which is not currently
broadcasting traffic announcement, turn the [VOLUME]
to the counterclockwise to set the volume to 0. The traffic
announcement will be output at the TA volume level.
[TA] (TA mode/TP (TA) Search) [VOLUME]
indicator
indicator 
						

							Preset Buttons [1] to [6] (PTY Preset)
17
16
E
N
G
L
I
S
H
CQ-C5303N
Programme Type (PTY) Reception
RDS FM stations provide a programme type identification signal. (Example: news, rock, classical music, etc.)
Programme Type (PTY) Mode 
Press and hold [D] (PTY)for more than 2 seconds to
switch the PTY display mode on and off.
The PTY function described below becomes enabled after
selecting to the PTY mode.
PTY Selection
qPress [[]to change the programme type as shown
below. ([]]: opposite direction)
wSelect a desired programme type and press [BAND].
Search will start to tune in to a station broadcasting the
selected programme type.
Press [BAND]again to cancel. 
Note:
¡When there is no corresponding programme type sta-
tion, “NONE” is displayed for 2 seconds.
PTY Preset
PTY Preset Call
Programme types are stored in memory under preset but-
tons from [1]to [6]as shown in the table on the next
page.
To tune in a desired programme type, press any of preset
buttons from [1]to [6].
Preset PTY Search
qSelect a programme type by pressing the preset button.
The preset programme type appears on the display for 5
seconds.
Example: Press preset button [1].
wPress the same preset button again (or press [BAND])
to tune in the desired programme type station.
Example:Press preset button [1]again.
Press [BAND]again to cancel. 
Note:
¡When there is no corresponding programme type sta-
tion, “NONE” is displayed for 2 seconds.
PTY Preset Change
qSelect a programme type by using PTY Selection or
pressing PTY Preset buttons.
wPress and hold one of the buttons from [1]to [6] for
more than 2 seconds.
Example:Press and hold preset button [2] for more
than 2 seconds.
SPEECH/MUSIC/NEWS/AFFAIRS/
INFO/SPORT/EDUCATE /DRAMA /
CULTURE/SCIENCE/VARIED /POP_M/
ROCK_M/EASY_M/LIGHT_M /CLASSICS/
OTHER_M/WEATHER/FINANCE/CHILDREN/
SOCIAL /RELIGION/PHONE_IN/TRAVEL/
LEISURE/JAZZ/COUNTRY/NATION_M /
OLDIES/FOLK_M/DOCUMENT
[D] (PTY) (PTY Mode)
[]][[]
(PTY selection)
[BAND] 
(Preset PTY search, PTY
selection)indicator 
						

							18
17
E
N
G
L
I
S
H
CQ-C5303N
PTY Preset (Default)
Preset No. Programme Type When PTY search is activated, these programme types are receivable.
1NEWS NEWS
2SPEECH AFFAIRS, INFO, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED,
WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE_IN,
TRAVEL, LEISURE, DOCUMENT
3SPORT SPORT
4POP_M POP_M
5CLASSICS CLASSICS
6MUSIC ROCK_M, EASY_M, LIGHT_M, OTHER_M, JAZZ, COUNTRY, NATION_M,
OLDIES, FOLK_M
Radio Data System (RDS) (continued)
Programme Type (PTY) Reception(continued)
Use the table below to note changes in preset stations.
Preset No. FM1 FM2 FM3
1
2
3
4
5
6
Other PTY functions
PTY Language Selection:The language displayed on the screen is selectable. (English or Swedish) (aPage 30) 
						

							19
18
E
N
G
L
I
S
H
CQ-C5303N
Enhanced Other Network (EON)
When EON data is received, the EON indicator lights and
the TA and AF functions are expanded as follows.
TA:Traffic information from the current and other network
stations can be received.
AF:The frequency list of preset RDS stations is updated
by EON data.
EON enables the radio to make fuller use of RDS informa-
tion. It constantly updates the AF list of preset stations,
including the one that is currently tuned in to.  For exam-
ple, if you preset a station far from home, you will later be
able to receive the same station at an alternative frequency,
or another station serving the same programme. EON also
keeps track of locally available TP stations for quick recep-
tion.
Emergency Announcement
Reception
When an emergency announcement is broadcast, the unit
is automatically switched to receiving that broadcast (Even
when in another mode without the Bluetooth Hands-Free
Kit mode). During receiving the emergency announcement,
“ALARM”appears on the display.
Note:
¡Emergency announcements are broadcast at the TA vol-
ume level. (aPage 16)
Other RDS functions
indicator 
						

							20
1
E
N
G
L
I
S
H
CQ-C5303N
19
E
N
G
L
I
S
H
Before Disc Playback
Caution
¡8 cm discs are not available for this unit,
therefore, do not insert them.
¡Do not use irregularly shaped discs.
¡Do not use discs that have a seal or label attached.
¡To avoid damaging the face plate, do not push it down
or place objects on it while it is open.
¡
Do not pinch your finger or hand in the face plate.
¡Do not insert foreign objectsinto the disc slot.
Available Discs
Note:
¡Refer to the section on “Notes on MP3/WMA” (a
Page 24) and “Notes on Discs” (aPage 37).
¡The power will be turned on automatically when a disc
is loaded at ACC on.
¡
A disc which has both CD-DA data and MP3/WMA
data on it may not be reproduced normally. 
Disc Insert
qPress [u] (OPEN).
When a disc is already loaded ( lights), the disc
will be ejected after the face plate fully opens.
wInsert a disc.
Note:
¡It may take some time to start playing.
¡Playback will start automatically after recognizing the
data of the loaded disc.
OR
(aPage 22 about MP3/WMA Player)
Disc Eject
qPress [u] (OPEN).
The disc will be ejected after the face plate fully opens.
wTake the disc out.
ePress [
u] (OPEN)to close the face plate.
Note:
¡The face plate is automatically closed after a warning
alarm sounds if no operation is performed for approxi-
mately 20 seconds.
Printed Side [
u:Eject]
(OPEN)
CD-R CD-RW CD-TEXT CD-ROM
CD-DA CD-DA CD-DA –
MP3/WMA MP3/WMA – MP3/WMA