Panasonic Wireless System Sh Fx71 Operating Instructions

							until 
2009/12/30
Panasonic Consumer Electronics 
Company, Division of Panasonic 
Corporation of North AmericaOne Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Canada Inc.5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca
RQTX1122-1Y
F1209SA1010
C Panasonic Corporation 2009
Printed in Malaysia
p
PP
Designed for Panasonic Home Theater Sound Systems that 
are compatible with the SH-FX71.
Operating Instructions
Wireless System
Model No.
 SH-FX71
If you have any questions contactIn the U.S.A. and Puerto Rico: 1-800-211-PANA (7262)In Canada: 1-800-561-5505
U.S.A. and Puerto Rico:
The warranty can be found on page 13.
Please return the product registration card (if included), or register via 
the internet at:
www.panasonic/register
Canada: The warranty can be found on page 15.
SH-FX71_RQTX1122-1Y_En.book  Page 1  Friday, January 22, 2010  2:38 PM 
						

							2RQTX1122WARNING:TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK 
OR PRODUCT DAMAGE, 
≥DO NOT EXPOSE THIS APPARATUS TO RAIN, 
MOISTURE, DRIPPING OR SPLASHING AND 
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH 
AS VASES, SHALL BE PLACED ON THE 
APPARATUS. 
≥USE ONLY THE RECOMMENDED ACCESSORIES.
≥DO NOT REMOVE THE COVER (OR BACK); 
THERE ARE NO USER SERVICEABLE PARTS 
INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.CAUTION!DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, 
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. 
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT 
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO 
OVERHEATING, ENSURE THAT CURTAINS AND ANY 
OTHER MATERIALS DO NOT OBSTRUCT THE 
VENTILATION VENTS.The socket outlet shall be installed near the equipment and easily 
accessible.
The mains plug of the power supply cord shall remain readily operable.
To completely disconnect this apparatus from the AC Mains, disconnect 
the power supply cord plug from AC receptacle.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:≥Reorient or relocate the receiving antenna.≥Increase the separation between the equipment and receiver.≥Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.≥Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded interface 
cables must be used with this equipment. Operation with non-approved equipment 
or unshielded cables may result in interference to radio and TV reception. Any 
changes or modifications not approved by the party responsible for compliance 
could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)To satisfy FCC RF exposure requirements for mobile transmitting devices, 
a separation distance of 20 cm or more should be maintained between 
the antenna of this device and persons during device operation. 
To ensure compliance, operations at closer than this distance is not 
recommended. The antenna used for this transmitter must not be co-located in 
conjunction with any other antenna or transmitter.
WA R N I N G :
SH-FX71_RQTX1122-1Y_En.book  Page 2  Friday, January 22, 2010  2:38 PM 
						

							RQTX1122IMPORTANT SAFETY INSTRUCTIONS3
IMPORTANT SAFETY INSTRUCTIONSRead these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed 
below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the 
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, 
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type 
plug. A polarized plug has two blades with one wider than the other. A 
grounding-type plug has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your safety. If the 
provided plug does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly 
at plugs, convenience receptacles, and the point where they exit from 
the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or 
table specified by the manufacturer, or sold with 
the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to 
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or 
when unused for long periods of time.
14)
Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has been damaged in any way, 
such as power-supply cord or plug is damaged, liquid has been spilled or 
objects have fallen into the apparatus, the apparatus has been exposed 
to rain or moisture, does not operate normally, or has been dropped
.
The following mark and symbols are located on bottom of the unit.
Product Identification Marking is located on the bottom of unit.
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
THE FOLLOWING APPLIES ONLY IN CANADA.
This device complies with RSS-210 of the IC Rules. Operation is subject 
to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including 
interference that may cause undesired operation of the device.
The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within the 
product’s enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to persons.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 
REMOVE SCREWS.  NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in 
the literature accompanying the appliance.
CAUTIONRISK OF ELECTRIC SHOCK
DO NOT OPEN
SH-FX71_RQTX1122-1Y_En.book  Page 3  Friday, January 22, 2010  2:38 PM 
						

							Accessories4RQTX1122
Accessories
Dear customerThank you for purchasing this product. For optimum performance and 
safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read 
the instructions completely. 
Please keep this manual for future reference.
User memo:- If you see this symbol-
Please check and identify the supplied 
accessories. Use numbers indicated in 
parentheses when asking for replacement parts. 
(Product numbers correct as of December 2009. 
This may be subject to change.)
For U.S.A. and Puerto Rico: 
To order accessories, refer to “Accessory Purchases (United States 
and Puerto Rico)” on page 14.
For Canada: 
To order accessories, call the dealer from whom you made your 
purchase. DATE OF PURCHASE
___________________________________
DEALER NAME
________________________________________
DEALER ADDRESS 
____________________________________
___________________________________________________________________TELEPHONE NUMBER
__________________________________
The model number and serial number of this product can be found on 
either the back or the bottom of the unit. Please note them in the space 
provided below and keep for future reference.
MODEL NUMBER  SH-FX71SERIAL NUMBER Information on Disposal in other Countries outside the 
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please 
contact your local authorities or dealer and ask 
for the correct method of disposal.
∏1 Digital transmitter (RFAX1012)
∏AC power supply cord (K2CB2CB00021)
For use with this unit only. Do not use it with other equipment. 
Also, do not use cords for other equipment with this unit.
∏2 Speaker cables
[REEX0992 (Blue), REEX0993 (Gray)]
SH-FX71_RQTX1122-1Y_En.book  Page 4  Friday, January 22, 2010  2:38 PM 
						

							5Control reference guide / Table of contentsRQTX1122
Control reference guide∫Top of the main unit
∫Rear of the main unit[Note]
≥Place the main unit in a horizontal position with the top panel facing 
upward.
≥To allow for proper ventilation and to maintain good airflow around the 
main unit, position it with at least 5 cm (2
z) of space on all sides.
WIRELESS LINK
POWER
WIRELESS LINK indicator (B9) Unit on/off button 
(B9)
Surround selector (B8) I/D SET button (B10) AC IN (B8) Speaker terminals (B8)
Table of contentsIntroductionIMPORTANT SAFETY INSTRUCTIONS............................................... 3
Accessories ........................................................................................... 4
Control reference guide ......................................................................... 5UseSetup ..................................................................................................... 6
Connections ....................................................................................... 7
Making the wireless link ..................................................................... 9
Using the surround back speakers ................................................... 10ReferenceProduct service..................................................................................... 11
Troubleshooting guide .......................................................................... 11
Specifications ...................................................................................... 12
Maintenance ........................................................................................ 12
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) .............. 13
Limited Warranty (ONLY FOR CANADA) ............................................ 15
SH-FX71_RQTX1122-1Y_En.book  Page 5  Friday, January 22, 2010  2:38 PM 
						

							6Setup6RQTX1122
SetupPreparation
≥Turn off all equipment before connection and read the appropriate 
operating instructions.
≥Connect the AC power supply cord after all other connections are 
complete.
[Note]
≥Do not use the wireless system and digital transmitter inside a metal 
cabinet or bookshelf.
≥Do not attempt to connect any extra surround speakers to the home 
theater unit.
≥Place the wireless system within approximately 10 m (33 ft) from the 
home theater unit.
∫Wireless setup diagrame.g. 
5.1ch
LS: Surround (left), RS: Surround (right)
≥Place on the side of or slightly behind the seating position.
The wireless system will automatically seek a clear channel if any of 
these other devices interfere with its communication.
When this happens, the wireless link indicator (“ [W] ” or an indicator) 
flashes on the home theater unit, and there will be a brief audio 
interruption coming from the surround speakers.
This is the normal operation of the product working to assure the best 
possible performance of your home theater unit.
If the interference persists, try moving the other devices to another 
location outside the range of the wireless system, or move the wireless 
system nearer to your home theater unit.
Wireless LAN: approx. 
2m (6 
1/2 ft) 
Cordless phone and other 
electronic devices: 
approx. 2 m (6 
1/2 ft) Wireless 
system To avoid interference, maintain the following distances between 
the wireless system and other electronic devices that use the 
same radio frequency (2.4 GHz band).
e.g.
Surround speaker cables (included)
Surround speakers are not included.Wireless systemHome theater unit
(with the digital 
transmitter)
Seating 
position
SH-FX71_RQTX1122-1Y_En.book  Page 6  Friday, January 22, 2010  2:38 PM 
						

							7Setup7RQTX1122
e.g. 
7.1ch
 (Using two units of the wireless system)
This placement offers 7.1-channel playback. Your home theater unit must 
be capable of 7.1-channel playback.
LS: Surround (left), RS: Surround (right)
≥Place on the side of the seating position.
LB
§: Surround back (left), RB
§: Surround back (right)
≥Place behind the seating position, about 1 m (3 ft) higher than ear level.
§LB or SBL RB or SBR
∫Digital transmitterRefer also to the operating instructions for your home theater unit.
(Continued on next page)
LS
LB
RB
RS

Surround speaker cables (included)
Surround speakers and surround back speakers are not included.Wireless system Home theater unit
(with the digital 
transmitter)
Seating position
Wireless system
ConnectionsDo not insert or remove while the home theater unit is on.T
OPTLOOP 
ANT GND
DIGITAL TRANSMITTER
Digital transmitter (included)
Insert fully until you hear a click. e.g.
Rear of the home theater unit
SH-FX71_RQTX1122-1Y_En.book  Page 7  Friday, January 22, 2010  2:38 PM 
						

							8Setup8RQTX1122
Setup
∫Wireless systemPreparation
If the surround speaker cables (with a blue connector and a gray connector) have already been connected, disconnect the surround speaker cables from 
your home theater unit.Connections∫AC power supply cord
SPEAKERS
ENCEINTESLS / RB LB / RSSURRI/D SET
AC IN
SURROUND (3 – 6    )
AMBIOPHONIQUES L
SIDER
SIDE
SURRL
SIDER
SIDE
SURRL
SIDE
R
SIDE
Surround 
selectorConnecting the speakers to the wireless system
Connect to terminals of the same color.
Insert fully.Speaker cable
For 5.1ch connectionSURROUND (LS): Blue
SURROUND (RS): GrayFor 7.1ch connectionSURROUND (LS): Blue
SURROUND BACK (LB): Gray
SURROUND (RS): Gray
SURROUND BACK (RB): Blue
Selector setting for the 
left and right speakers
Selector setting for the 
left speakers
Selector setting for the 
right speakers Impedance: 3≠ to 6≠
Speaker input power: 100 W (min)
To household AC outlet
(AC 120 V, 60 Hz) AC power supply cord (included)
SH-FX71_RQTX1122-1Y_En.book  Page 8  Friday, January 22, 2010  2:38 PM 
						

							9Setup9RQTX1122
≥Refer also to the operating instructions for your home theater unit.
≥When you enjoy 7.1-channel playback, refer also to “Using the surround back speakers” (B10).
Conserving power
The wireless system consumes a small amount of power, even when it is 
off (approx. 0.2 W). To save power when the unit is not to be used for a 
long time, unplug it from the household AC outlet.
Making the wireless link1
Turn on the wireless system.
WIRELESS LINK
POWER
Unit on/off button [POWERCI,BÍ]
Use this button to turn the unit on and off.
CI: The unit is on.
BÍ
: The unit is off.
WIRELESS LINK indicator
Red:  The unit is on and the wireless link is deactivated.
Green: The unit is on and the wireless link is activated.
2
Turn on your home theater unit.The wireless link indicator on your home theater unit will be turned 
on.
≥The type of the indicator varies according to the home theater unit.
3
Start play on the home theater unit.SLPST CT
W
≥If the indicator is flashing, refer to 
Troubleshooting guide (B11 ) . e.g. Display on the home theater unit
SH-FX71_RQTX1122-1Y_En.book  Page 9  Friday, January 22, 2010  2:38 PM 
						

							Setup1010
RQTX1122
Setup
By using 2 sets of SH-FX71, you can enjoy 7.1-channel playback, making 
the surround speakers and surround back speakers wireless (B7).
≥Keep the digital transmitter of the additional wireless system for later 
use.
∫PairingPreparation
≥Make sure to connect the AC power supply cord of the additional 
wireless system.
≥Turn on the home theater unit and reduce the volume.[Note]
≥If you should change the digital transmitter card, repeat the pairing 
steps using the new digital transmitter.
≥SH-FX71 cannot be used with SH-FX65, SH-FX67 or SH-FX70.
Using the surround back speakersUse only a digital transmitter supplied with the SH-FX71.
Wireless system is originally paired to work with the digital 
transmitter that comes along with it. For the digital transmitter to 
work with the additional wireless system, pairing is necessary.
Pairing is necessary.
Wireless systemHome theater unit
Additional wireless systeme.g. After pairing
1 Turn on the additional wireless system.
2 While pressing the stop button (e.g. [∫] ) on the home theater unit, 
press the numbered button [2] on the remote control until “P” lights in 
the home theater unit’s display.
3 While “P” is displayed, press 
[I/D SET] on the rear of the 
additional wireless system.
≥The indicator on the additional 
wireless system turns green.
≥If “P” goes off before you press 
[I/D SET], repeat step 2 and 
then continue the procedure.
4 While pressing the stop button on the home theater unit, press the 
numbered button [2] on the remote control.
5 Turn off and on the additional wireless system.
≥Make sure the indicator on the additional wireless system lights up 
green.

Use a pointed object.
SH-FX71_RQTX1122-1Y_En.book  Page 10  Friday, January 22, 2010  2:38 PM