Panasonic Wireless Speaker System Sc-ne5 Owners Manual

21
 (ENG) VQT4U55
ENGLISH
Others
As a factory preset, this system will always turn off 
automatically if there is no sound output and no 
operation for approx. 30 minutes.
To cancel this function
1Press [SETUP] repeatedly to select 
“AUTO OFF”.
2Press [3,4] to select “OFF” and then press 
[OK].
	≥ To turn automatic standby on, select “ON” in step 2.
≥ This setting cannot be selected when “FM” is the source.
≥ When connected to a Bluetooth
® device, the automatic 
standby function does not work.
When...

22
VQT4U55 (ENG)
To change the wireless communication quality 
between the CD unit and the speaker unit. If the 
units are not wirelessly connected, or output sound 
is interrupted, select “C.MODE1” in step 2.
1Press [SETUP] repeatedly to select 
“COM.MODE” and then press [OK].
2Press [3,4] to select “C.MODE1” or 
“C.MODE2” and then press [OK].
	≥[CD] [iPod] : Stop play before switching communication 
modes. If you switch modes while this system is playing, 
sound output will be lost during the switching...

23
 (ENG) VQT4U55
ENGLISH
Troubleshooting
Before requesting service, make the following 
checks. If you are in doubt about some of the check 
points, or if the solutions indicated in the following 
guide do not solve the problem, refer to “Customer 
Services Directory (United States)” on page 30 if 
you reside in the U.S.A. or refer to “Limited 
Warranty (ONLY FOR CANADA)” on page 31 if you 
reside in Canada.
Do you have the latest software installed?≥Occasionally, Panasonic may release updated software...

24
VQT4U55 (ENG)
Cannot charge or operate.≥Have you selected the appropriate selector? 
Press [iPod] to select either “IPOD_DOCK” or “IPOD_PORT”.
≥ Check that the iPod/iPhone/iPad is connected properly. ( l9)
≥ The battery of the iPod/iPhone/iPad is depleted. Charge the iPod/
iPhone/iPad, and then operate again.
≥ Connect the iPod/iPhone/iPad again or try to restart the iPod/
iPhone/iPad.
≥ When this system is in standby mode, charging will not start when 
using the “IPOD_PORT” connection. Turn this...

25
 (ENG) VQT4U55
ENGLISH
“CHECKING CONNECTION”≥This system is checking the connected iPod/iPhone/iPad. 
≥ If this display keeps appearing, make sure that the battery of the 
iPod/iPhone/iPad is not depleted and that the iPod/iPhone/iPad is 
turned on and connected correctly ( l9).
“DIMMER”≥Appears 10 seconds after the volume is turned to “0”.
“DL ERROR”≥The software download has failed. Press any button to exit. 
Please try again later.
≥ The server cannot be found. Press any button to exit. Make sure...

26
VQT4U55 (ENG)
Attaching the speaker unit to a wall (optional)
The speaker unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the 
screw used and the wall are strong enough to support the weight of at least 33 kg (72.8 lbs).
The screws and other items are not supplied as the type and size will vary with each installation.
≥ Refer to step 2 of “Wall mount instructions” for details about the required screws.
≥ Be sure to attach the fall prevention cord as a secondary...

27
 (ENG) VQT4U55
ENGLISH
2Attach the wall mount bracket to the wall with 2 
screws (not supplied). (Both sides)
≥Use a level to ensure both wall mount brackets are 
level.
3Fix the safety holder onto the unit with the 
screw (supplied).
{.Screw tightening torque: 50 N 0cm (0.4 lbf 0ft) to 
70 N 0cm (0.5 lbf 0ft).
4Attach the fall prevention cord (not supplied) to 
this unit.
5Hook the unit securely onto the wall mount 
brackets with both hands.
≥ Connect the FM antenna and the AC power supply cord 
to...

28
VQT4U55 (ENG)
Specifications
∫GENERAL
	*1: When the iPod/iPhone/iPad is not charging.*2: Prospective communication distanceMeasurement environment: 
Temperature 25 oC (77oF) / Height 1 m (3.3 ft) 
Measure in “MODE 1”
≥ Specifications are subject to change without notice.
Mass and dimensions are approximate.
≥
Total harmonic di storti on is measured by a digi tal  spectrum analyzer.
Power consumption
CD unit 23 W
Speaker unit 14 W
Power consumption in standby mode*
1
CD unit Approx. 0.2 W
Speaker unit...

29
(ENG) VQT4U55
ENGLISH
ESPAÑOL
Conexiones
≥ Consumo de energía en Standby (modo de espera). ( l28)
Operaciones de 
reproducción de medios
Preparación
≥Encienda la unidad.
≥ Inserte el medio. ( lderecho)
≥ Presione [CD/RADIO], [iPod] o [ , AUX] para 
seleccionar la fuente de audio.
Spanish Quick Reference / Referencia rápida en español
Reproducción básica
Reproducir Presione [1/; ].
Detención Presione [∫].
Pausa Presione [1/; ].
Presione nuevamente para reiniciar la 
reproducción.
Saltear Presione [:/6...

30
VQT4U55 (ENG)
Limited Warranty (ONLY FOR U.S.A.)Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA Only)If your product does not work properly because of a defect in materials or 
workmanship, Panasonic Corporation of North America (referred to as “the 
warrantor”) will, for the length of the period indicated on the chart below, which 
starts with the date of original purchase (“warranty period”), at its option either 
(a) repair your product with new or refurbished parts, (b)...