Home > Panasonic > Speaker System > Panasonic Wireless Speaker System Sc-na30, Sc-na10 Owners Manual

Panasonic Wireless Speaker System Sc-na30, Sc-na10 Owners Manual

Here you can view all the pages of manual Panasonic Wireless Speaker System Sc-na30, Sc-na10 Owners Manual. The Panasonic manuals for Speaker System are available online for free. You can easily download all the documents as PDF.

Page 11

VQT5C36
11
For NFC-compatible AndroidTM devices only
Just placing an NFC (Near Field Communication)-compatible Bluetooth® device on 
the unit, you can complete all preparations, from registering a Bluetooth® device to 
establishing a connection.
Preparation
Enable the NFC function on the Bluetooth
® device
1 Download the app “Panasonic Music Streaming” (free of charge) to your  Bluetooth
® device from Google PlayTM.• Enter “Panasonic Music Streaming” in the search box of Google PlayTM and search 
...

Page 12

VQT5C36
12
You can change the transmission speed to prioritize sound quality or connectivity.• The default setting is “Emphasis on sound quality”. When the sound is interrupted, select “Emphasis on connectivity”.
While pressing and holding [LP], press and hold [ ] for 4 seconds or more. Emphasis on connectivity:
A beep sound is emitted once, and the Bluetooth® indicator (blue) and the LP mode 
indicator (green) flash once.
Emphasis on sound quality:A beep sound is emitted twice, and the Bluetooth®...

Page 13

VQT5C36
13
This mode minimizes power consumption of the battery by lowering the speaker 
output. (>8)
Press and hold [LP] for 2 seconds or more until the LP mode indicator 
(green) lights up.
The LP mode is enabled.• Press and hold [LP] for 2 seconds or more again will return the setting back to the normal mode.
Note• Even when the AC adaptor is connected, LP mode remains enabled.
• In LP mode, even when the volume knob is adjusted, the volume of the unit may not increase.
• Turning off the LP mode may...

Page 14

VQT5C36
14
If receiving a call on the mobile phone connected to this unit with Bluetooth®, you 
can make a hands-free call through this unit.
Preparation
Connect this unit and the mobile phone with Bluetooth
®.
∫ Receiving a call
Press [   ] when this unit rings.
• When receiving the call, the Bluetooth® indicator (blue) on the unit blinks.
• Talk into the microphone ( >6, 7) on this unit.
∫ Ending the call
Press [   ].
Note• Adjust the volume during a call with volume knob on this unit.
• When the...

Page 15

VQT5C36
15
Before requesting service, make the following 
checks. If you are in doubt about some of the 
check points, or if the solutions indicated in 
the following guide do not solve the problem, 
refer to “Customer Services Directory (United 
States and Puerto Rico)” (
>21) if you reside 
in the U.S.A. or Puerto Rico, or refer to 
“Limited Warranty (ONLY FOR CANADA)” 
(
>22) if you reside in Canada.
[NA30]The retractable panel is not operating correctly.• The Auto Power Off function is activated,...

Page 16

VQT5C36
16
The One-Touch Connection (NFC 
feature) is not working.
• Turn on the NFC feature of the device.
Volume is low when this unit is 
connected to a TV via Bluetooth®.• Adjust the volume on the TV. The 
volume of headphone output may be 
coupled with the volume of the 
Bluetooth
® output depending on the 
TV. In such case, adjust the volume 
of the headphone output on the TV.
∫ Amplifier section
∫Speaker section
Specifications
RMS Output Power (AC Adaptor)Normal Mode
[NA30]
10 % total harmonic...

Page 17

VQT5C36
17
∫Bluetooth® section
∫ Microphone section
∫ Terminals section
∫ Accessories section
∫ General
Note• Specifications are subject to change without 
notice.
• Mass and dimensions are approximate.
• Total harmonic distortion is measured by a  digital spectrum analyzer.
* By the measurement method prescribed in  the provisions
Bluetooth® system specificationVe r. 3 . 0Wireless equipment classificationClass 2(2.5mW)Supported profilesA2DP/AVRCP/HFPSupported codecaptXR, AAC, SBCFrequency band2.4 GHz...

Page 18

VQT5C36
18
• Use up the battery before disassembling. (For Cautions of the battery >3)
• Keep the sheets and the screws out of reach of children to prevent swallowing.
∫ How to disassemble the SC-NA30
To remove the battery when disposing of this 
unit
The following instructions are not intended for repairing 
purposes but for the disposal of this unit. This unit is not 
restorable once disassembled.
When disposing of this unit, take out the battery installed in this unit and 
recycle it.





•...

Page 19

VQT5C36
19
∫
How to disassemble the SC-NA10
 



 

• Insulate the 
A with cellophane tape or similar.
• Do not disassemble the battery.
SC-NA30_10PPC_VQT5C36_eng.book  19 ページ  2013年8月8日 木曜日 午前10時39分 

Page 20

VQT5C36
20
Limited War ranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Products Limited Warranty
Limited Warranty Coverage 
(For USA and Puerto Rico Only)
If your product does not work properly 
because of a defect in materials or 
workmanship, Panasonic Corporation of North 
America (referred to as “the warrantor”) will, 
for the length of the period indicated on the 
chart below, which starts with the date of 
original purchase (“warranty period”), at its 
option either (a) repair your product with...
Start reading Panasonic Wireless Speaker System Sc-na30, Sc-na10 Owners Manual

Related Manuals for Panasonic Wireless Speaker System Sc-na30, Sc-na10 Owners Manual

All Panasonic manuals