Panasonic Wireless Speaker System Sc-na30, Sc-na10 Owners Manual

							VQT5C36PPC
Owner’s Manual
Wireless Speaker System
Model No. SC-NA30SC-NA10
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this 
manual for future use.
Register online at 
www.panasonic.com/register (U.S. customers only)If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA (7262)
Canada : 1-800-561-5505
SC-NA30 SC-NA10
until 
2013/08/27
SC-NA30_10PPC_VQT5C36_eng.book  1 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
2
IMPORTANT SAFETY 
INSTRUCTIONS
Read these operating instructions carefully before using 
the unit. Follow the safety instructions on the unit and the 
applicable safety instructions listed below. Keep these 
operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as  radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or  grounding-type plug. A polarized plug has two 
blades with one wider than the other. A grounding-
type plug has two blades and a third grounding 
prong. The wide blade or the third prong are 
provided for your safety. If the provided plug does 
not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs, convenience 
receptacles, and the point where they exit 
from the apparatus.
11 Only use attachments/accessories specified  by the manufacturer.
12 Use only with the cart,  stand, tripod, bracket, or 
table specified by the 
manufacturer, or sold with 
the apparatus. When a 
cart is used, use caution 
when moving the cart/
apparatus combination to avoid injury from tip-
over.
13 Unplug this apparatus during lightning storms  or when unused for long periods of time.
14 Refer all servicing to qualified service  personnel. Servicing is required when the 
apparatus has been damaged in any way, 
such as power-supply cord or plug is 
damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
∫WARNINGUnitTo reduce the risk of fire, electric shock or product 
damage,
• Do not expose this unit to rain, moisture, dripping 
or splashing.
• Do not place objects filled with liquids, such as  vases, on this unit.
• Use only the recommended accessories.
• Do not remove the cover except disassembling 
for discarding.
• Do not repair this unit by yourself. Refer servicing  to qualified service personnel.
AC adaptorThe power plug is the disconnecting device.
Install this unit so that the power plug can be 
unplugged from the socket outlet immediately.
∫ CAUTIONUnit• Do not throw.
• Do not hit this unit to anything. Do not apply 
strong pressure to this unit. External case may 
break when strong impact is applied, causing to 
damage or malfunction.
• Do not leave the unit in a car exposed to direct 
sunlight for a long period of time with doors and 
windows closed.
• Product identification marking is located on the  bottom of the unit.
• Keep the volume knob out of reach of children to  prevent swallowing.
AC adaptorThis AC adaptor operates on AC between 100 V and 
240 V.
But
• In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power supply only.
• When connecting to an AC supply outside of the 
U.S.A. or Canada, use a plug adaptor to suit the 
AC outlet configuration.
Precautions
SC-NA30_10PPC_VQT5C36_eng.book  2 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
3
Battery pack (Lithium ion battery pack)This unit has a built-in battery.
The following is the caution for removing the battery 
when disposing of this unit (>18, 19).
• Do not heat or expose to flame.
• Do not short circuit.
• Do not disassemble, crush.
• Do not re-use.
• Do not place in microwave ovens.
THE FOLLOWING APPLIES IN 
THE U.S.A. AND CANADA
This device complies with Part 15 of FCC Rules 
and Industry Canada licence-exempt RSS 
standard(s).
Operation is subject to the following two 
conditions: 
(1) This device may not cause interference, and 
(2) this device must accept any interference, 
including interference that may cause undesired 
operation of this device.
FCC ID:ACJ-SC-NA10, SC-NA30
IC: 216A-SCNA10, SCNA30
This transmitter must not be co-located or 
operated in conjunction with any other antenna 
or transmitter.
This equipment complies with FCC radiation 
exposure limits set forth for an uncontrolled 
environment and meets the FCC radio frequency 
(RF) Exposure Guidelines in Supplement C to 
OET65. This equipment has very low levels of RF 
energy that are deemed to comply without testing of 
specific absorption ratio (SAR).
This equipment complies with IC radiation 
exposure limits set forth for an uncontrolled 
environment and meets RSS-102 of the IC radio 
frequency (RF) Exposure rules.
This equipment has very low levels of RF 
energy that are deemed to comply without 
testing of specific absorption ratio (SAR).
A lithium ion battery that is 
recyclable powers the 
product you have 
purchased. Please call 1-
800-8-BATTERY for 
information on how to 
recycle this battery.
THE FOLLOWING APPLIES ONLY 
IN THE U.S.A.
FCC Note:
This equipment has been tested and found to 
comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following 
measures: 
≥Reorient or relocate the receiving antenna.
≥ Increase the separation between the 
equipment and receiver.
≥
Connect the equipment into an outlet on a circuit 
different from that to which the receiver is 
connected.
≥ Consult the dealer or an experienced radio/
TV technician for help.
FCC Caution: To assure continued compliance, 
follow the attached installation instructions and 
use only shielded interface cables when 
connecting to peripheral devices.
Any changes or modifications not expressly approved 
by the party responsible for compliance could void 
the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions:
(1) This device may not cause harmful 
interference, and 
(2) this device must accept any interference 
received, including interference that may cause 
undesired operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: SC-NA10, SC-NA30
Responsible Party:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact Telephone No.: 
1-800-211-PANA (7262)
THE FOLLOWING APPLIES ONLY 
IN CANADA.
CAN ICES-3(B)/NMB-3(B)
SC-NA30_10PPC_VQT5C36_eng.book  3 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
4
Frequency band usedThis unit uses the 2.4 GHz frequency band.
Certification of this device• This unit conforms to frequency restrictions and has received certification based on frequency 
laws. Thus, a wireless permit is not necessary.
• The actions below are punishable by law in some  countries:
– Taking apart/modifying the unit.
– Removing specification indications.
Restrictions of use• Wireless transmission and/or usage with all 
Bluetooth® equipped devices is not guaranteed.
• All devices must conform to standards set by  Bluetooth SIG, Inc.
• Depending on the specifications and settings of a  device, it can fail to connect or some operations 
can be different.
• This system supports Bluetooth
® security 
features. But depending on the operating 
environment and/or settings, this security is 
possibly not sufficient. Transmit data wirelessly to 
this system with caution.
• This system cannot transmit data to a Bluetooth
® 
device.
Range of useUse this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the 
environment, obstacles or interference.
Interference from other devices• This unit may not function properly and troubles  such as noise and sound jumps may arise due to 
radio wave interference if this unit is located too 
close to other Bluetooth
® devices or the devices 
that use the 2.4 GHz band.
• This unit may not function properly if radio waves  from a nearby broadcasting station, etc. is too 
strong.
Intended usage• This unit is for normal, general use only.
• Do not use this system near an equipment or in an environment that is sensitive to radio 
frequency interference (example: airports, 
hospitals, laboratories, etc).
• Android and Google Play are trademarks of 
Google Inc.
• The Bluetooth
® word mark and logos are 
owned by the Bluetooth SIG, Inc. and any 
use of such marks by Panasonic 
Corporation is under license. Other 
trademarks and trade names are those of 
their respective owners.
• aptX R software is copyright CSR plc or its 
group companies. All rights reserved.
The aptX R mark and the aptX logo are 
trademarks of CSR plc or one of its group 
companies and may be registered in one or 
more jurisdictions.
Turn off the power of this unit and wipe with dry soft 
cloth. Disconnect the AC adaptor when the AC 
adaptor is used.
• When it get very dirty, wipe off dirt with a cloth  immersed in water and wrung strongly, and then 
wipe with dry soft cloth.
• Solvents such as benzine, thinner, alcohol, oil,  detergents, etc., may cause the external case to 
be altered or the coating may come off, so do not 
use them.
•  Before using chemically treated cloth, read the  instructions that came with the cloth carefully.
-If you see this symbol-
About Bluetooth®
Panasonic bears no responsibility 
for data and/or information that is 
compromised during a wireless 
transmission.
Licenses
Maintenance
Information on Disposal in 
other Countries outside the 
European Union
This symbol is only 
valid in the 
European Union.
If you wish to 
discard this 
product, please 
contact your local 
authorities or dealer 
and ask for the 
correct method of 
disposal.
SC-NA30_10PPC_VQT5C36_eng.book  4 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
5
Table of contents
IMPORTANT SAFETY INSTRUCTIONS............................................ 2
Precautions ......................................................................................... 2
About Bluetooth
®................................................................................ 4
Licenses ............................................................................................. 4
Maintenance ....................................................................................... 4
Accessories ........................................................................................ 5
Control reference guide (SC-NA30) ................................................... 6
Control reference guide (SC-NA10) ................................................... 7
About the power of this unit ................................................................ 8
About the DC OUT terminal (USB) ..................................................... 9
Listening to audio from a Bluetooth
® device ..................................... 10Connecting via Bluetooth® menu................................................................. 10
One-Touch Connection (Connecting by NFC) ............................................ 11
Switching the communication quality .......................................................... 12
Disconnecting Bluetooth
®............................................................................ 12Using LP Mode ................................................................................. 13
Using the AUX input ......................................................................... 13
Auto Power Off ................................................................................. 13
Receiving a call hands-free .............................................................. 14
To return to the factory preset state ................................................. 14
Troubleshooting ................................................................................ 15
Specifications ................................................................................... 16
To remove the battery when disposing of this unit ........................... 18
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) ....................................... 20
Limited Warranty (ONLY FOR CANADA) ......................................... 22
Check the supplied accessories before using this unit.
∏ 1 AC adaptor (RFEA228C-AG)
Note• Product numbers provided in this Owner’s Manual correct as of August 2013. These may be 
subject to change.
• Do not use AC adaptor with other equipment.
• (ONLY FOR CANADA) The enclosed Canadian French label sheet corresponds to the English 
display on the unit.
Accessories
SC-NA30_10PPC_VQT5C36_eng.book  5 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
6
Control reference guide (SC-NA30)
11
12
13
14
8
9
10
15
7
6
5
4
2 31
1 Retractable panel
2 BASS/TREBLE knob
• Adjusts low/high-pitched tones3 Volume knob: Adjusts the volume• When the maximum or minimum 
volume is reached, you will be 
notified by a beep sound.
4 RESET switch [   ]• Use a paper clip, etc., to press the switch if this unit does not operate 
correctly, like when you cannot turn 
off/on the power.
5 AUX IN jack ( >13)
6 DC OUT terminal
• When using this port, use a USB 
cable (commercially-available). (>9)7 DC IN terminal 8 Battery indicator (red)
9Bluetooth
® indicator (blue)
10 LP Mode indicator (green)
11 NFC touch area ( >11 )
12 Standby/on switch [ Í/I]
13 Bluetooth
® pairing button ( >10)/
Play button/Pause button/Call 
button ( >14)
14 LP button
 [LP]
15 Microphone ( >14)
OFF
Rear view
When operating the unit, hold it with 
hand to prevent it from falling.
ON
When the unit is turned on, the 
retractable panel is lowered, enabling 
you to adjust the knobs.
Side view
SC-NA30_10PPC_VQT5C36_eng.book  6 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
7
∫How to use the cover and operation of the unit
Control reference guide (SC-NA10)
123
4
9
10
1112
13
5678


1 RESET switch [   ]• Use a paper clip, etc., to press the  switch if this unit does not operate 
correctly, like when you cannot turn 
off/on the power.
2 AUX IN jack ( >13)
3 DC IN terminal
4 DC OUT terminal
• When using this port, use a USB 
cable (commercially-available). (>9)5 Battery indicator (red)
6 Bluetooth® indicator (blue)
7 LP Mode indicator (green)
8 NFC touch area (> 11 )9 Volume knob: Adjusts the volume
• To operate the knob, place your 
thumb on the knob as indicated by 
A, and turn it vertically.
• When the maximum or minimum  volume is reached, you will be 
notified by a beep sound.
10 Standby/on switch [ Í/I]
11 B l u e t o o t h® pairing button ( >10)/
Play button/Pause button/Call 
button ( >14)
12 LP button
 [LP]
13 Microphone ( >14)
Place the unit so that its bottom will 
fit in the anti-slip groove.
How to use the coverOperation of the unit
Cover
When operating the unit, hold it with 
hand to prevent it from falling.
SC-NA30_10PPC_VQT5C36_eng.book  7 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
8
This unit has a built-in battery. Please charge the battery before using this unit for 
the first time.
∫Charging the battery
Connect the AC adaptor to the 
household AC outlet.
•If charging is necessary, the Battery 
indicator (red) lights. When charging 
is complete, the Battery indicator 
goes off.
About the battery status
*1These battery statuses of the unit serve 
only as an approximation, and may vary 
according to the conditions of use.
Battery life in use/Battery charge time/Rechargeable times
*2Calculated by the test method established by the company [while connecting with Bluetooth®, 
using at the surrounding temperature of 25 oC ( i77  oF)]
*3When charging at the surrounding temperature of 25 oC ( i77  oF) after the battery is depleted.
∫ Using the unit by connecting it to a household AC outlet
Press [ Í/I] to turn on the unit. Connecting the AC adaptor before turning on the 
unit allows you to supply power from a household AC outlet during use.
• It takes longer to charge while this unit is turned on.
About the power of this unit
Battery indicator (red) 
( > 6, 7) Battery status
Fast blinking
(at approximately 
1 second intervals)About 5%*1
Slow blinking
(at approximately 
2 second intervals)About 15%*1
[NA30] [NA10]Battery life in useApprox. 14 hours*2Approx. 10 hours*2
Battery life in use (LP mode)Approx. 20 hours*2Approx. 20 hours*2
Battery Charge timeApprox. 3 hours*3Approx. 3 hours*3
Rechargeable timesAbout 500 times About 500 times
[NA30]
[NA10]
AC adaptor 
(supplied) To a household 
AC outlet
Rear view
SC-NA30_10PPC_VQT5C36_eng.book  8 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
9
Note• Do not use any other AC adaptors except the supplied one.
• When this unit is not used over a long period of time, charge the built-in battery at least once every six months to prevent it from deteriorating.
• Charging may not start if the battery level is sufficiently high even if it is not full.
• It is recommended to charge the battery in the temperature of between 10 oC and 35 oC 
( i 50 oF to  i95 oF). The Battery indicator (red) may flash and charging may not be possible 
when it is out of recommended temperature range.
• The battery may not charge when the temperature surrounding the battery is high during the  operation or right after the operation even when it is within the recommended temperature 
range. In such case, stop the usage and let it cool down.
• To ensure safety, in the case of an excessive input signal, the system may be automatically  interrupted and power is turned off.
• Use of the DC OUT terminal will reduce the operating time.
The DC OUT terminal of this unit is for supplying/charging power to a connected 
device (rated value: 5 V/1 A). Note that the port cannot be used for purposes other 
than supplying/charging power.
Note that when the unit is turned off, charging is not possible.
Preparation
Turn on the unit.
1 Using a USB cable  (commercially-available), 
connect the unit and a 
compatible device.
2 Once fully charged, remove  the USB cable 
(commercially-available) 
from the DC OUT terminal.
Note• A cable compatible with your device is required. If a cable is supplied with your device, use the cable.• Even if you connect a cable compatible with the DC OUT terminal of this unit, your device may 
not be charged. In that case, use a charger supplied with your device.
• Depending on your device, charging methods other than the specified one may not be  allowed. Check the operating instructions of your device before use.
• Do not connect a device with a rated value higher than 5 V/1 A to this unit. Doing so may 
cause malfunction.
• To check if charging is complete, look at the screen of the connected device, etc.
• After charging, pull out the compatible cable.
About the DC OUT terminal (USB)
[NA30]
[NA10]
To the compatible device
USB cable 
(commercially-
available)
Rear view
SC-NA30_10PPC_VQT5C36_eng.book  9 ページ  ２０１３年８月８日　木曜日　午前１０時３９分 
						

							VQT5C36
10
Preparation
Enable the Bluetooth® function of the device you want to connect to, and bring it 
closer to the unit.
• Use a Bluetooth
® device within the approximate range of 10 m (33 ft.) from the 
unit.
• If you intend to use an NFC (Near Field Communication)-compatible Bluetooth
® 
device, proceed to “One-Touch Connection (Connecting by NFC)” ( >11 ) .
∫ Pairing with Bluetooth
® device
1 Press [ Í/I] to turn this unit on.
The Bluetooth® indicator (blue) blinks slowly.
• If this unit is being used for the  first time (factory preset state): 
The Bluetooth
® indicator (blue) blinks fast.   The unit will enter pairing standby. 
  Skip to step 3.
2 Press and hold [   ] until the Bluetooth® indicator (blue) blinks fast.The unit will enter pairing standby.3 Select “SC-NA30” or “SC-NA10” from the Bluetooth® device’s Bluetooth® 
menu.
When the Bluetooth® device is paired and connected, the Bluetooth® indicator (blue) on the 
unit lights up.
• If prompted for a passkey, input “0000”.
• If the Bluetooth
® device need to operate the Bluetooth® pairing setting and the 
Bluetooth® connecting setting, operate both settings.4 Start playing back music, a movie, etc. on your Bluetooth® device.• The volume can be adjusted by rotating the volume knob of the unit.  When the maximum or minimum volume is reached, you will be no tified by a beep 
sound.
∫ Listening to audio from a paired deviceWhen this unit is turned on, the Bluetooth® indicator (blue) will blink slowly indicating 
that the unit is in connection standby mode. Please perform Steps 3 and 4.
• When the power is turned on, this unit is connected to the last-used Bluetooth® device. At this 
point, please perform Step 4.
Listening to audio from a Bluetooth® device
Connecting via Bluetooth® menu
SC-NA30_10PPC_VQT5C36_eng.book  10 ページ  ２０１３年８月８日　木曜日　午前１０時３９分