Panasonic Wifi Phone For Skype Kx Wp1050 Operating Instructions

Getting Started
For assistance, please visit http://www.panasonic.com/help31
3Connect a separate Ethernet cable to the “LAN” port on the base unit and the Ethernet 
(LAN) port on your computer.
LYou can also connect your computer to the base unit via wireless LAN connection.
4Connect the included AC adaptor cord to the power port on the base unit and an AC 
outlet.
LWhen the base unit turns on (The WAN indicator lights in green or amber), the 
installation is complete.
Note:
LIn step 2, if you cannot...

Getting Started
32For assistance, please visit http://www.panasonic.com/help
While you are at home
The base unit has 2 modes of operation for use at home: AP (Bridge) mode and Router 
mode.
AP (Bridge) mode:
Designed for the case when you have an existing router or modem (DSL or cable) with a 
built-in router.
LRefer to the instructions on page 33.
Router mode:
Designed for the case when you only have a standard DSL or cable modem.
LRefer to the instructions on page 34.
Note:
LIf your modem has more than...

Getting Started
For assistance, please visit http://www.panasonic.com/help33
AP (Bridge) mode - With an EXISTING ROUTER or MODEM with a 
built-in ROUTER
If you install the base unit with your existing router or modem with a built-in router, the base 
unit should be set to AP (Bridge) mode. Select [AP (Bridge)] for your connection mode in 
Initialization Setup (page 36). In AP (Bridge) mode, the base unit connects wireless 
devices to one another and to the LAN, and allows wireless devices to use a DHCP...

Getting Started
34For assistance, please visit http://www.panasonic.com/help
4Connect a separate Ethernet cable to the “LAN” port on the base unit and the Ethernet 
(LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged 
the router from in step 2).
LYou can also connect your computer to the base unit via wireless LAN connection.
5Connect the included AC adaptor cord to the power port on the base unit and an AC 
outlet.
LWhen the base unit turns on (The WAN indicator lights in...

Getting Started
For assistance, please visit http://www.panasonic.com/help35
1Switch the Mode selector to “HOME”.
2Turn off your computer properly. Unplug your cable or DSL modem’s power cord and 
leave the modem turned off for at least 10 minutes to clear its memory. Unplug any 
cable connecting the modem to your computer. However, the modem needs to remain 
connected to the Internet.
3Make sure the base unit is left unplugged. Connect the included Ethernet cable to the 
“WAN” port on the base unit and...

Getting Started
36For assistance, please visit http://www.panasonic.com/help
Setting up the base unit for the first time (Initialization 
Setup)
For security purpose and enabling the Internet connection, it is necessary to set up the 
base unit at the very first time. You can log in the base unit and configure the unit’s settings 
using the Web browser on the computer you connected to the base unit’s “LAN” port.
Important:
LRequired Web browser:
Microsoft Internet Explorer 6.0 or later for Windows...

Getting Started
For assistance, please visit http://www.panasonic.com/help37
Initialization Setup flow
Follow the procedures below to set up the base unit for Internet connection.
1Setting your login user name and password
Set your user name and password to log in the base unit.Step 1 – 4 
from 
page 38
2Creating a new Internet connection profile
Select the Internet connection mode.
LMode available in HOME mode: DHCP, Static, PPPoE, AP (Bridge)
LMode available in HOTEL mode: DHCP, Static, PPPoEStep 5 – 7...

Getting Started
38For assistance, please visit http://www.panasonic.com/help
Initialization Setup
1After the base unit installation (page 29 – 35), turn on the computer you connected to 
the base unit’s “LAN” port.
2Open the Web browser. Enter http://192.168.102.1/ (the base unit’s default IP 
address) or http://kxwpa.webpage in the address field of the browser and press the 
ENTER key. 
You can also double click the KX-WPA102 icon in My Network Places in the Start menu 
when using Windows XP to enable...

Getting Started
For assistance, please visit http://www.panasonic.com/help39
3Enter the desired user name and password, then click [Save].
Important:
LPlease keep your user name and password secure.
LThe base unit begins restarting and a prompt screen with fields for your user name 
and password is displayed.
SettingDescription
[User Name]LThe user name and password can contain 6 to 15 
alphanumeric characters.
LThe following cannot be used: [ ˝ ], [ ´ ], [&], [], [ : ], 
[(space)]
LUser name and...

Getting Started
40For assistance, please visit http://www.panasonic.com/help
4Enter the user name and password set in step 3. Then click [OK].
LTop Menu is displayed.
WP1050.book  Page 40  Wednesday, November 22, 2006  9:24 AM