Panasonic Wide Screen Tv Ct 30wx52 Operating Instructions
Have a look at the manual Panasonic Wide Screen Tv Ct 30wx52 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 Audio Adjustment SPEAKERS In AUDIO menu under SPEAKERS, select the desired SPEAKER mode. ACTIONCH CH VOL VOL In AUDIO menu press to select SPEAKERS. Press to enter submenu field. 1 2 ACTIONCH CH VOL VOL Press to select your desired mode. ModeFunction ON OFF & Variable Audio Out OFF & Fixed Audio OutTV speakers operate normally. TV speakers off -audio adjustable by television. TV speakers off -audio adjustable by the external amplifier only. OTHER ADJ. SURROUND SPEAKERS AUDIO ADJ. ON ON OFF & VARIABLE AUDIO OUT OFF & FIXED AUDIO OUT ACTIONCH CH VOL VOLPress twice to return to the roller guide. To end Adjustment: Press to exit roller guide. This returns the set to normal viewing. EXIT SET UP TIMER NORMAL PICTURE
42 Picture in Picture Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source such as a VCR, cable box, etc. Basic PIP Operation 1Press the PIP button on the remote control to display the PIP Frame on screen. DTV AUXDVD VCR DBS RCVR POWER BBE MENU PLAY R-TUNE PROGGUIDESAP PAGE EXIT STOP PAUSEREC CBL VOL VOL ACTION TV 123 456 789 0 CH CH MUTEASPECTTV/VIDEOLIGHT SPLIT RECALL PIP MAXFFPIP MINREW FREEZETV/VCRPIP CH VCR CHSEARCHOPEN/CLOSE SWAPPIPMOVE RECALL PIP CH VCR CH PIP PIP Note: Audio is from Main Picture only. 2Select channels for the PIP frame by pressing PIP CH VCR CH . 4Press to view picture source status. 5Press PIP again to cancel the PIP Frame. 3Press to select channel for the Main Picture. or Use the remote control numeric keypad. Main Picture ACTIONCH CH VOL VOL 123 456 78 09 Picture-in-Picture Frame SWAP SWAP Press SWAP to switch the PIP and MAIN PICTURE source. ABAB BA
43 PIP MINREWPIP MAXFF Picture in Picture Operation Minimum MAX FREEZE Search Frames PIP Frames Freeze These features are used to size PIP Frame. Press PIP MINREW or PIP MAXFF to size the PIP Frame. During PIP operation this feature is used to stop action in PIP frame. Press FREEZETV/VCR again to continue action. PIP MIN, PIP MAX TV/VIDEO Button Press when PIP frame is displayed to select desired input mode. Main Picture Picture-in-Picture Frame Search This feature lets you scan through all available channels. Press SEARCHOPEN/CLOSE to display search frames. Move This feature is used to move PIP frame to one of four corners. Press MOVE to position PIP frame to desired corner. MOVE SEARCHOPEN/CLOSE TV/VIDEO PIP CH #PIP CH #PIP COMPONENT 1PIP COMPONENT 2PIP VIDEO 1 PIP VIDEO 2 PIP VIDEO 3 PIP VIDEO 4 Press FREEZETV/VCR to stop PIP frame action. 1 In PICTURE MENU OTHER ADJ2, select FREEZE PIP or SPLIT (see p33). 2 Press FREEZETV/VCR while PIP frame is not displayed. 1 2 FREEZETV/VCR Note: To stop action for Main picture:Main Picture Main Picture Main Picture 1 2 Main Picture Press SEARCHOPEN/CLOSE again to stop search feature. This returns the screen to the previous condition (single screen, PIP screen or SPLIT screen).
44 Notes: (1) Sound from the left screen is output from the speakers on the TV set (and earphone jacks). (2) When the screen is split, signals of the left screen are output from the rear monitor output terminal. (3) The left and right screen are processed by individual circuits, and therefore, may have slight variation in sound and image quality. (4) Split screen returns to single screen when the TV is turned off. (5) The right and left screens cannot display the same picture at the same time. (6) Use the right screen when playing video games on a split screen (to avoid distortion of images). FREEZETV/VCR Main Picture (The previously selected screen appears.) Split ScreenMain Picture This feature lets you watch two different channels side by side with or without an external video source. The audio is from the Main picture only (left side). Split screen enables you to search other channels on the right screen or check video recording status. Split Screen Freezing pictures DTV A U XDVD VCR DBS RCVR POWER PIP MAXFF MOVERECALL BBE MENU PLAY R-TUNE PROGGUIDESAP PAGE EXIT PIPSTOP PAUSERECPIP MINREW CBL VOL VOL ACTION TV 123 456 789 0 CH CH MUTEASPECTTV/VIDEOLIGHT FREEZETV/VCR SWAPSPLIT PIP CH VCR CHSEARCHOPEN/CLOSE Splitting the screen 1Press SPLIT to display Split screen. 2Returning to one screen. Press SPLIT again to return. 1 Press FREEZETV/VCR again to recover.2 During Split Screen this feature is used to stop action in SPLIT screen. Press FREEZETV/VCR to stop action in SPLIT screen. 1 In PICTURE MENU OTHER ADJ2, select FREEZE PIP or SPLIT (see p33). 2 Press FREEZETV/VCR while SPLIT frame is not displayed. Note: To stop action for Main picture: FREEZE
45 CH10 SWAP CHCH 123 456 78 09TV/VIDEO Changing the channels for the Split Screen PIP CH VCR CHSelect channels for the Split Screen by pressing PIP CH VCR CH . Swapping left and right screens Press SWAP to switch the SPLIT SCREEN and MAIN PICTURE source. Changing the channels for the Main Picture Select channels for the Main Picture by pressing CHCH or use the remote control numeric keypad. Viewing Videos While Split screen is displayed, press TV/VIDEO to switch modes. Split Screen CH10 CH10 CH10 CH5CH5 CH10 CH5 CH10VIDEO 1 Search Frames Searching the other channels SEARCHOPEN/CLOSEpress SEARCHOPEN/CLOSE to search the other channels. Press SEARCHOPEN/CLOSE again to stop the search. This returns the screen to its previous condition. CH10
46 ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. ASPECT button The aspect mode changes each time the ASPECT button is pressed. Notes: (1) For a 480p signal input during component input signal mode, the mode will change as follows: (2) When a 1080i signal is being received, the mode is set to FULL, and aspect switching is not possible. (3) During PIP operation, ASPECT Controls are available only in the main picture according to the receiving signal of the main picture. (4) During SPLIT Screen, ASPECT Controls are not available. ACTION TV DTVCBL AUXDVD VCR DBS RCVR CH CH VOL VOL RECALLSAPBBE MENU POWER MUTEASPECTTV/VIDEOLIGHT ASPECT ZOOM FULL JUST 4 : 3 4 : 3 FULL ZOOM 4 : 3 will display a 4:3 picture at its standard 4:3 size. ZOOM mode magnifies the central section of the picture. FULL will display the picture at its maximum size but with sight elongation. JUST mode will display a 4:3 picture at its maximum size but with aspect correction applied to the sides of the screen so that elongation is only apparent at the left and right edges of the screen. The size of the picture will depend on the original signal. Notes: (1) The S-VIDEO terminal on this set can detect specially encoded signals that are compatible with a wide screen monitor. When a full image from the S-VIDEO terminal of specially encoded video is detected by the set, the screen size is automatically set to FULL mode. (2) The screen size also changes if ID-1 is detected. (3) The screen size will also change if S1 detection has been set. Mode Picture Explanation 4 : 3 ZOOM FULL JUST JUST4 39 16 ZOOM4 316 9 FULL4 316 9 4 : 3 3 4
47 Confirming Confirm that registration with cable TV provider and connection of equipment are completed. Turn the CABLE BOX on and select the desired volume level. Press while pointing the remote control towards the CABLE BOX. Note: The remote control code number is set for Panasonic products. When peripheral equipment does not operate, reset code (See page 62 - 63). Operate the CABLE BOX and select the desired volume level. When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3 or CH4. This does not apply when signal is input from VIDEO INPUT. Cable TV ACTION 123 456 78 09 TV DTV A U XDVD VCR DBS RCVR CH CH VOL VOL PLAY R-TUNE PROGGUIDE RECALLSAP PAGE EXIT PIP SPLIT MOVE SWAPSTOP PAUSERECPIP MAXFFPIP MINREW BBE MENU FREEZE TV/VCRPIP CH VCR CHSEARCHOPEN/CLOSE MUTEASPECTTV/VIDEOLIGHT POWER CBL POWER CBL1 2 3 INPUT OUTPUT ANTENNA TERMINAL ON THE BACK OF THE TV CABLE BOXTo Antenna Input Incoming Cable from Antenna or Cable TV System. Press CBL to confirm.
48 ACTIONCH CH VOL VOLPress twice to return to the roller guide. Press to exit roller guide. This returns the set to normal viewing. EXIT LOCK TIMER NORMAL PICTURE TIMER 1 ACTIONCH CH VOL VOLPress to display the roller guide menu. Press to rotate to TIMER. 2Press to display TIMER. TIME AM DAY SLEEP TIMER1 TIMER2 CLOCK SET12 00: SUN TIMER CLOCK SET 1 ACTIONCH CH VOL VOL In TIMER menu press to select CLOCK SET. Press to enter submenu field. TIME AM DAY SLEEP TIMER1 TIMER2 CLOCK SET 1200 : SUNTIMER EXIT LOCK TIMER The TIMER can switch the TV ON or OFF. Before attempting TIMER1 and TIMER2 confirm the CLOCK SET and adjust if necessary. Then set TIMER1 and TIMER2. Press to select the main menu. 3To end Adjustment: CLOCK SET sets the present time. This is necessary to operate the TIMER features. ACTIONCH CH VOL VOL Proceed to each adjustment item of the selected main menu.
49 TIMER SLEEP 1 ACTIONCH CH VOL VOL In TIMER menu press to select SLEEP. Press to enter submenu field. HOW LONG ?SLEEP TIMER1 TIMER2 CLOCK SET 30 TIMER 2 ACTIONCH CH VOL VOL Press to select the desired sleep time. To turn off the timer select NO. NO 3060 90 2 ACTIONCH CH VOL VOL Press to select TIME Press to set hours AM or PM. 3 ACTIONCH CH VOL VOL Press to move to minutes position. Press to set minutes. TIMESet the time of day. 4 Press to select DAY. Press to select the day of the week. DAYSet the day of the week. TIME AM DAY SLEEP TIMER1 TIMER2 CLOCK SET 1200 : SUNTIMER TIME AM DAY SLEEP TIMER1 TIMER2 CLOCK SET 1200 : SUNTIMER TIME AM DAY SLEEP TIMER1 TIMER2 CLOCK SET12 00: SUN TIMER SLEEP sets the sleep time. ACTIONCH CH VOL VOL
50 TIMER Timer1 and Timer2 In TIMER menu, select one or both timers to turn the television on and off at selected times, on selected channels, and on selected days.TIME must be entered in CLOCK SET to operate the TIMER features. ACTIONCH CH VOL VOL In TIMER menu press to select TIMER1 or TIMER2. Press to enter submenu field. ACTIONCH CH VOL VOL Press to select DAY. Press to set the day of the week. (select day or days) DAYSet the day of the week. ACTIONCH CH VOL VOL Press to select ON TIME. Press to set hours AM or PM. ACTIONCH CH VOL VOL Press to move to minutes position. Press to set minutes. ON TIMESet the time of day. 1 Press to select OFF TIME. Press to set hours AM or PM. Press to move to minutes position. Press to set minutes. OFF TIMESet the time of day. 2 1 2 ON TIME OFF TIME ENTER CHANNEL SET DAYSLEEP TIMER1 TIMER2 CLOCK SET DAILY YES TIMER PM 12 00: PM 13 00: 5 ON TIME OFF TIME ENTER CHANNEL SET DAYSLEEP TIMER1 TIMER2 CLOCK SETDAILY YES TIMER PM00 : 12 PM 13 00: 5 ON TIME OFF TIME ENTER CHANNEL SET DAYSLEEP TIMER1 TIMER2 CLOCK SETDAILY YES TIMER PM 1200 : PM 13 00: 5 ON TIME OFF TIME ENTER CHANNEL SET DAYSLEEP TIMER1 TIMER2 CLOCK SETDAILY YES TIMER PM 12 00: PM 00 : 13 5 ON TIME OFF TIME ENTER CHANNEL SET DAYSLEEP TIMER1 TIMER2 CLOCK SETDAILY YES TIMER PM 12 00: PM 13 00 : 5ACTIONCH CH VOL VOL ACTIONCH CH VOL VOL ON TIME OFF TIME ENTER CHANNEL SET DAYSLEEP TIMER1 TIMER2 CLOCK SET DAILY YES TIMER PM 12 00: PM 13 00: 5