Panasonic Wide Screen Tv Ct 30wx52 Operating Instructions
Have a look at the manual Panasonic Wide Screen Tv Ct 30wx52 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 Procedure • Option A 1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 2. Begin the video. • Option B 1. Select ANT2 in the SET UP menu under Prog Chan. 2. Tune the television to Channel 3 or 4, depending on your VCR. 3. Begin the video. Viewing a video Procedure • Option A (Recording and viewing the same program) 1. Select ANT2 in the SET UP menu under Prog Chan. 2. Tune the television to Channel 3 or 4, depending on your VCR. 3. Using the VCR, tune to the television program you would like to record. 4. Begin recording. • Option B (Recording one program while viewing another program) 1. Select ANT1 in the SET UP menu under Prog Chan. 2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 3. Using the VCR, tune to the television program you would like to record. 4. Begin recording. 5. Press the TV/VIDEO button on the remote control to switch back to TV mode. 6. Tune the television to the program you would like to view. Recording a television program Cable Connection
12 Cable Connection Follow this diagram when connecting your television to both a VCR and a cable box. Note: To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu under Prog Chan (see page 23). Note: The remote control must be programmed with supplied codes to operate the VCR and cable box (see page 64-66). Procedure 1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels). 2. Tune the television to Channel 3 or Channel 4. 3. Using the cable box, tune to the premium cable channel you would like to view. Viewing a premium (scrambled) cable channel VCR and Cable Box Connection S-VIDEO AUDIOCOMPONENT VIDEO INPUT INPUT PB PR Y VIDEO RL TO AUDIO AMP RL 12123 VIDEO PROG OUT ANT1 ANT2 SPLIT OUT S-VIDEO VIDEO ANT INPUT ANT OUTPUT ANT INPUT ANT OUTPUT AUDIORL Use either the S-Video or the Video connection. Incoming Cable VCR CABLE BOXCONNECTIONS ON BACK OF TV CABLES NOT SUPPLIED
13
Notes:
(1) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals.
Input 4 is located on the front of the unit.
Select the desired VIDEO input position by pressing the TV/VIDEO button. (See page 17)
(2) When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video
input terminal are connected at the same time. Note: To view a different channel while recording:
• Select ANT1 in the SET UP menu under Prog Chan.
• Press the TV/VIDEO button on the remote control to TV mode.
• Tune the television to a program (except another premium cable channel).
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected
to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5. Using your cable box, tune to the premium cable channel you would like to record.
6. Begin recording. Recording a premium (scrambled) cable channel
Cable Connection
14 Cable Connection Digital TV - Set-Top Box (DTV-STB) or DVD Connection This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In order to view DTV programming, the STB must be connected to the component video inputs (Y, P B , PR ) of the television. A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p. This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with interlaced TV pictures. Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV. Note: There are 2 sets of three video inputs, Y, P B , and PR . Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs. Amplifier Connection (TO AUDIO AMP) To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP inputs on back of television. Note: TO AUDIO AMP terminals cannot be connected directly to external speakers. Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier. CABLES NOT SUPPLIED S-VIDEO AUDIOCOMPONENT VIDEO INPUT DIGITAL TV OUTPUTINPUT PB PR Y VIDEO RL TO AUDIO AMP RL 12123 VIDEO PROG OUT ANT1 ANT2 SPLIT OUT MAINVIDEO AUDIO OUTPUTPBPRY RL DTV INPUT TERMINALS ON BACK OF TV CABLES NOT SUPPLIED S-VIDEO AUDIOCOMPONENT VIDEO INPUT INPUT PB PR Y VIDEO RL TO AUDIO AMP RL 12123 VIDEO PROG OUT ANT1 ANT2 SPLIT OUT CONNECTIONS ON BACK OF TV External Amplifier Procedure 1. Select SPEAKERS ON located in the onscreen AUDIO menu. 2. Set amplifier volume to minimum. 3. Adjust television volume to desired level. 4. Adjust amplifier volume to match the television. 5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu. 6. Volume,mute,bass,treble and balance are now controlled through the television. Audio Adjustments
15 S-VIDEO VIDEOL-AUDIO-R INPUT 4 ACTIONTV/VIDEOVOLUMEHPJCHANNEL Cable Connection Program Out Connection (PROG OUT) To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television. See optional equipment manual for further instructions for recording and monitoring. S-VIDEO AUDIOCOMPONENT VIDEO INPUT INPUT PB PR Y VIDEO RL TO AUDIO AMP RL 12123 VIDEO PROG OUT ANT1 ANT2 SPLIT OUT CONNECTIONS ON BACK OF TV VCR OR MONITOR Procedure 1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals. 2. PROG OUT terminal display is the same as onscreen display. Front Control Panel Push to open the front panel of the television to use the TV without remote control or to use the Audio/Video input jacks for optional equipment. Press TV/VIDEO to select VIDEO 4 input mode. CAMCORDER Note: The front control panel can be used to access menus and switch video mode when the remote control is not available. Note: The S-VIDEO connection provides higher quality picture. It overrides other VIDEO connections. Use INPUT 4, AUDIO L and R with S-VIDEO connection. Procedure 1. Connect equipment to front Audio/Video input jacks. 2. Operate optional equipment as instructed in equipment manual. A second VCR, video disc player, video game equipment and DSS equipment can also be connected to the video inputs. See the optional equipment manual for details.
16 Illuminated Remote Control Location of Controls Power button Press to turn the TV ON or OFF (See page 18). Note: The TV’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode). R-TUNE button Switches to previously viewed channel or video mode. MUTE button Press this button to mute the sound, press again to cancel the mute. Operation of other Device TV DTVCBL AUXDVD VCR DBS RCVR Mode Selection buttons Selects the operation mode for the remote control. (See page 62) VCR Mode Selection for Remote Control Digital Video Disk Mode Selection for Remote ControlAux Mode Selection for Remote Control TV Mode Selection for Remote ControlDigital Broadcasting Satellite for Remote Control Receiver/Amplifier Mode Selection for Remote Control Digital TV Mode Selection for Remote Control Cable TV Mode Selection for Remote Control PIP or SPLIT FREZE TV/VCR Switch TV/DBS Switch - - PIP or SPLIT CH up/down VCR CH up/down TV/DBS CH up/down - - PIP Search - - OPEN/CLOSE - TV VCR CABLE/DBS DVD/LD/CD RCVR TV VCR CABLE/DBS DVD/LD/CD RCVRPIP Minimize/Maximize VCR REW/FF - Skip Search REW/FF Surround -/+ - PLAY - PLAY - - VCR RECORD DBS RECORD - -- Pause - Pause -- STOP - STOP - Buttons Buttons DevicePIP MAXFFSTOPPIP MINREWPLAYPAUSE Buttons Buttons DeviceSEARCHOPEN/CLOSERECFREEZETV/VCRPIP CH VCR CH ASPECT button Change of screen size (See page 46). R-TUNE ZOOM FULL JUST 4 : 3
17 ACTION 123 456 78 09 TV DTVCBL AUXDVD VCR DBS RCVR POWER CH CH VOL VOL PLAY R-TUNE PROGGUIDE RECALLSAP PAGE EXIT PIP SPLIT MOVE SWAPSTOP PAUSERECPIP MAXFFPIP MINREW BBE MENU FREEZE TV/VCRPIP CH VCR CHSEARCHOPEN/CLOSE MUTEASPECTTV/VIDEOLIGHT ACTIONCH CH VOL VOL RECALLBBE MENU GUIDE PAGE EXIT Direct program number selection buttons Lights the remote control buttons. The selected button blinks when lit. Returns to normal viewing from the MENU screen. Previous item in MENU. TV/VIDEO button The input mode changes each time this button is pressed. GUIDE button for DBS. Location of Controls SAP button Selects Audio mode (See page 38). Page up/down for DBS, skip +/- for DVD & CD. Swap pictures in Split Screen and Picture in Picture operation (See page 42, 45).PROG dash button Program dash channel numbers for DTV and DBS. PROG Move PIP frame in Picture in Picture Operation (See page 43). Split Screen (see page 44) Picture in Picture Operation (see page 42) RECALL R-TUNE Turning the remote control illumination ON and OFF . Remote control illumination can be turned ON and OFF by pressing the RECALL button while pressing the R-TUNE button. COMPONENT 2 TV COMPONENT 1 VIDEO 3 VIDEO 4 VIDEO 1VIDEO 2 Reduces volume Moves cursor to the left during menu mode. Displays menu Press to access DTV, DBS or DVD menus. During TV mode press to select BBE ON or BBE OFF.Changes to the next channel down Moves cursor downward during menu mode.Increases volume Moves cursor to the right during menu mode. Changes to the next channel up Moves cursor upward during menu mode. Press to display time, channel, sleep timer and other options. STEREO SAP MONO
18 Power ON / OFF Note: Main plug types vary between countries. The power plug shown at left may, therefore, not be the type fitted to your set. Press the POWER switch on the TV to turn the set on. POWER-ON: Red When the set is on press the POWER switch on the TV to turn the set off. STANDBY: No light Example: The screen below is displayed for a while after the TV is turned on. (setting condition is an example.) Press the POWER button on the remote control to turn the TV on: Red Press the POWER button on the remote control to turn the TV off: No light (standby) Connecting the Plug to the Wall Outlet How to Turn the Power On CH 3 SAPJUST VIVIDRemote Control Sensor ACTION TV DTVCBL AUXDVD VCR DBS RCVR CH CH VOL VOL RECALLSAPBBE MENU MUTEASPECTTV/VIDEOLIGHT POWER Menu Language Selection In SET UP Menu, Select IDIOMA/LANGUE to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French). (refer to page 22) POWER Note: The TV will still consume some power as long as the power cord is still inserted into the wall outlet.
19 S-VIDEO VIDEOL-AUDIO-RINPUT 4ACTIONTV/VIDEOVOLUMEHPJCHANNEL S-VIDEO VIDEOL-AUDIO-R INPUT 4 ACTIONTV/VIDEOVOLUMEHPJCHANNEL VHF, UHF and CATV Power switch Remote control sensorOperation can be done from the TV set. • Channel selectors • Volume adjusters Press to turn the TV on (See page 18). Press TV to operate the TV set with the remote control. Press to select the desired channel. Select the desired volume level. Notes: (1) The channel number and volume level remain the same even after the TV is turned off. (2) Power consumption and howling of sound can be reduced if the volume level is lowered. POWER 1 2 3 123 456 78 09 DTV AUXDVD VCR DBS RCVR RECALLBBE MENU PLAY R-TUNE PROGGUIDESAP PAGE EXIT PIP SPLIT MOVE SWAPSTOP PAUSERECPIP MAXFFPIP MINREW FREEZETV/VCRPIP CH VCR CHSEARCHOPEN/CLOSE MUTEASPECTTV/VIDEOLIGHT POWER CBL CH CH VOL VOL ACTION TV TV ACTIONCH CH VOL VOL ACTIONCH CH VOL VOL 4
20 MODE PROG CHAN OTHER ADJ. IDIOMA / LANGUE CC SET UPENGLISH Roller Guide Menu Navigation 1 ACTIONCH CH VOL VOL 2 ACTIONCH CH VOL VOL3 ACTIONCH CH VOL VOL 4 ACTIONCH CH VOL VOL 5 ACTIONCH CH VOL VOL Press to display the roller guide menu. Press to rotate to desired icon. Press to display the main menu and submenu field. Press to select main menu feature. Press to enter submenu field. Press to select desired submenu feature. Press to select or adjust. Press twice to return to the roller guide. EXITSET UP ON MUTE MODEPROG CHAN OTHER ADJ. IDIOMA / LANGUE CCCCCC SET UP OFFNO ON MUTE MODEPROG CHAN OTHER ADJ. IDIOMA / LANGUE CCCC CC SET UP C1 NO MODE PROG CHAN OTHER ADJ. IDIOMA / LANGUE CCCCCC SET UP OFF ON MUTENO ON MUTE MODEPROG CHAN OTHER ADJ. IDIOMA / LANGUE CCCCCC SET UP OFFNO Submenu field Main menu field EXITSET UP NORMAL PICTURE Press to exit roller guide. This returns the set to the normal viewing.