Panasonic Wide Screen Tv Ct 30wx52 Operating Instructions
Here you can view all the pages of manual Panasonic Wide Screen Tv Ct 30wx52 Operating Instructions. The Panasonic manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 11
11 Procedure • Option A 1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 2. Begin the video. • Option B 1. Select ANT2 in the SET UP menu under Prog Chan. 2. Tune the television to Channel 3 or 4, depending on your VCR. 3. Begin the video. Viewing a video Procedure • Option A (Recording and viewing the same program) 1. Select ANT2 in the SET UP menu under Prog Chan. 2. Tune the television to Channel 3 or 4, depending on your...
Page 12
12 Cable Connection Follow this diagram when connecting your television to both a VCR and a cable box. Note: To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu under Prog Chan (see page 23). Note: The remote control must be programmed with supplied codes to operate the VCR and cable box (see page 64-66). Procedure 1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels). 2. Tune the television to Channel 3 or Channel 4. 3. Using...
Page 13
13
Notes:
(1) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals.
Input 4 is located on the front of the unit.
Select the desired VIDEO input position by pressing the TV/VIDEO button. (See page 17)
(2) When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video
input terminal are connected at the same time. Note: To view a different channel while recording:
• Select ANT1 in the SET UP menu under Prog Chan.
• Press the...
Page 14
14 Cable Connection Digital TV - Set-Top Box (DTV-STB) or DVD Connection This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In order to view DTV programming, the STB must be connected to the component video inputs (Y, P B , PR ) of the television. A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p. This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal...
Page 15
15 S-VIDEO VIDEOL-AUDIO-R INPUT 4 ACTIONTV/VIDEOVOLUMEHPJCHANNEL Cable Connection Program Out Connection (PROG OUT) To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television. See optional equipment manual for further instructions for recording and monitoring. S-VIDEO AUDIOCOMPONENT VIDEO INPUT INPUT PB PR Y VIDEO RL TO AUDIO AMP RL 12123 VIDEO PROG OUT ANT1 ANT2 SPLIT OUT CONNECTIONS ON BACK OF TV VCR OR MONITOR...
Page 16
16 Illuminated Remote Control Location of Controls Power button Press to turn the TV ON or OFF (See page 18). Note: The TV’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode). R-TUNE button Switches to previously viewed channel or video mode. MUTE button Press this button to mute the sound, press again to cancel the mute. Operation of other Device TV DTVCBL AUXDVD VCR DBS RCVR Mode Selection buttons Selects the operation mode for the remote...
Page 17
17 ACTION 123 456 78 09 TV DTVCBL AUXDVD VCR DBS RCVR POWER CH CH VOL VOL PLAY R-TUNE PROGGUIDE RECALLSAP PAGE EXIT PIP SPLIT MOVE SWAPSTOP PAUSERECPIP MAXFFPIP MINREW BBE MENU FREEZE TV/VCRPIP CH VCR CHSEARCHOPEN/CLOSE MUTEASPECTTV/VIDEOLIGHT ACTIONCH CH VOL VOL RECALLBBE MENU GUIDE PAGE EXIT Direct program number selection buttons Lights the remote control buttons. The selected button blinks when lit. Returns to normal viewing from the MENU screen. Previous item in MENU. TV/VIDEO button The input mode...
Page 18
18 Power ON / OFF Note: Main plug types vary between countries. The power plug shown at left may, therefore, not be the type fitted to your set. Press the POWER switch on the TV to turn the set on. POWER-ON: Red When the set is on press the POWER switch on the TV to turn the set off. STANDBY: No light Example: The screen below is displayed for a while after the TV is turned on. (setting condition is an example.) Press the POWER button on the remote control to turn the TV on: Red Press the POWER button on...
Page 19
19 S-VIDEO VIDEOL-AUDIO-RINPUT 4ACTIONTV/VIDEOVOLUMEHPJCHANNEL S-VIDEO VIDEOL-AUDIO-R INPUT 4 ACTIONTV/VIDEOVOLUMEHPJCHANNEL VHF, UHF and CATV Power switch Remote control sensorOperation can be done from the TV set. • Channel selectors • Volume adjusters Press to turn the TV on (See page 18). Press TV to operate the TV set with the remote control. Press to select the desired channel. Select the desired volume level. Notes: (1) The channel number and volume level remain the same even after the TV is...
Page 20
20 MODE PROG CHAN OTHER ADJ. IDIOMA / LANGUE CC SET UPENGLISH Roller Guide Menu Navigation 1 ACTIONCH CH VOL VOL 2 ACTIONCH CH VOL VOL3 ACTIONCH CH VOL VOL 4 ACTIONCH CH VOL VOL 5 ACTIONCH CH VOL VOL Press to display the roller guide menu. Press to rotate to desired icon. Press to display the main menu and submenu field. Press to select main menu feature. Press to enter submenu field. Press to select desired submenu feature. Press to select or adjust. Press twice to return to the roller guide. EXITSET...