Panasonic Wide Lcd Television Tc 32lx300 Operating Instructions

11
Audio / Video Connections
Connections
AV  INDIGITAL
AUDIO OUT
VIDEO
PR
RL1
2
1
2 P
BY
AUDIO
COMPONENTVIDEO
VIDEO S-VIDEOINPUT
AUDIO OUTINPUT
HDMI
AUDIO IN
RLAUDIOAUDIO OUT
DIGITAL AUDIO OUTAUDIO INL
R OPTICAL IN
VIDEO
PR
RL1
2
1
2 P
BY
AUDIO
COMPONENTVIDEO
VIDEO S-VIDEOINPUT
AUDIO OUTINPUT
HDMI
AUDIO IN
DIGITAL AUDIO
OUT
Notes:
•External speakers cannot be connected directly to AUDIO OUT terminals.
•When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When...

12
Connections
COMPONENT VIDEO INPUT Connection
This TV is capable of displaying 1080i and 480p DTV signals when connected to\
 a DTV Tuner Set-Top Box (STB). This
TV also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image.\
This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with
interlaced TV pictures.
•To view DTV programs, connect the STB to the component video input termin\
als...

13
AV  I N
RLAUDIOHDMI AUDIO IN
HDMI  IN
HDMI OUTL
R
VIDEO
PR
RL 1
2
1
2
P
BY
AUDIO
COMPONENTVIDEO
VIDEO S-VIDEOINPUT
AUDIO OUTINPUT
HDMI
AUDIO IN
AUDIO OUT
12
Connections
HDMI ∗1 (High Definition Multi media Interface) is the first all-digital cons\
umer electronics A/V interface that supports
uncompressed standard. The HDMI terminal supports both video and audio information.
An EIA/CEA-861/861B ∗
2-compliant device, such as a Set-Top Box or DVD player with HDMI or DVI output terminal can be
connected...

14
Connections
CableCARDTM  allows you to tune digital and high definition cable channels through th\
e cable antenna. Consult your cable
company on the availability of CableCARD TM
.
CableCARDTM Connection
Procedure
1. Connect the cable antenna to ANTENNA (A).
2. Turn the TV on (see page 15).
3. Set the input mode to TV (see page 8).
4. Insert the CableCARD
TM  (with upper side facing out) into CableCARD TM
 slot on the back of the TV.
Follow the messages displayed on the screen.
BA Cable InANT
POD...

15
TVVCRDVD
RCVR
LIGHT
TV/VIDEOAANTENNA B
SAP
AUX
POWER
DTVDBS/CBL
First Time Setup
For your convenience, First Time Setup menu will be displayed on screen when the set is turned on for the first time. If
needed, follow the menus and procedures displayed on-screen for setting up the features.
You can also make the settings in Setup menu (see pages 30-32).
TV
POWER
VCRDVD
RCVR
LIGHT
TV/VIDEOA -ANTENNA - B
SAP
123
AUX
ASPECT
MUTERECALLCH
VOL
CHVOL
OK
MENU EXIT
DTVDBS/CBL
SLEEP
Select the configuration of...

16
This feature allows you to selectively auto scan channels.
You can scan All, Analog only channels or Analog & Digital channels.
Notes:
•If the EXIT button is pressed at anytime during Auto Scan, Auto Scan will be cancelled and the TV will return to the
First Time Setup menu.
•If a CableCARD
TM is present during the First Time Setup and Antenna (A) is set to cable, Antenna (A) will not be
scanned due to the CableCARDTM providing the channel map. Press to select the sub-menu.
Press to start Auto Scan....

17
Watching TV programs
VHF and UHF
MENU
R-TUNEPROG
EXIT
VCRDVD
RCVR
LIGHT
A -ANTENNA - B
SAP
123
456
78
0
9
AUX
ASPECT
MUTERECALL
STOPPAUSE
TV/VCR
REC
CH
VOL
CHVOL
OK
POWER
TV/VIDEO
TV
FF SPLIT
PLAY
DTVDBS/CBL
SLEEP
TV
OPEN/CLOSESPLIT CH
DVD/VCR CH SWAP
REW
POWER
Notes:
•The channel number and volume level remain the same even after the TV is
turned off.
•Power consumption can be reduced if the volume level is lowered.
TV
CH
VOL
CHVOL
OK
CH
VOL
CHVOL
OK
Cable TV
CH
VOL
CHVOL
OK
POWER
Make sure that...

18
MENU
CH
VOL
CHVOL
OK
Picture
Color
Tint
Brightness
Picture
Sharpness
Normal
Other Adjust 
Pic Mode
Vivid
31
Back Light63
31
31
63
42
Set
TV
POWER
R-TUNEPROG
VCRDVD
RCVR
LIGHT
TV/VIDEOA -ANTENNA - B
SAP
123
456
78
0
9
AUX
ASPECT
MUTERECALL
STOPPAUSE
TV/VCR
REC
CH
VOL
CHVOL
OK
MENUEXIT
FF SPLIT
PLAY
DTVDBS/CBL
SLEEP
TV
OPEN/CLOSESPLIT CH
DVD/VCR CH SWAP
REW
Menu Navigation
1Press to display the Main menu.
2Press to select the menu.
Timer
(see page 27)
Setup
(see page 30)
Lock
(see page 36)
3
4Press to...

19
Press to select Other Adjust.
Press to display the sub-menu.
To select Other Adjust sub-menu
Press to return.
To return to the previous menu
Press to return to normal picture.
To exit the menu
Menu Navigation
1
2
Press to select the sub-menu.
Press to adjust or activate the sub-menu.
CH
VOL
CHVOL
OK
MENU
EXIT
Other Adjust
AI Picture
Video NR
3D Y/C Filter
Color Matrix
MPEG NR
Color Temp
Cool
On
On
On Color Enhance
Off
Off
Advanced AdjustSD
CH
VOL
CHVOL
OK 

20
CH
VOL
CHVOL
OK
Press to select the sub-menu.
Press to adjust the sub-menu. Lets you choose the pre-set picture mode that best suits the program you are viewing. This feature also affects Color Temp
setting (see page 21).
Notes:
•Each mode has its own picture settings (Back Light, Color, Tint, Brightness, Picture and Sharpness).
•The Custom setting is stored for TV, VIDEO1, VIDEO2, VIDEO3, COMPONENT1, COMPONENT2, HDMI and Card
operations mode individually.
Press to select Other Adjust.
Press to...