Panasonic VT50 Series Tv User Manual

							All settings
Audio
Advanced  audio
 MENU    Menu  > Audio  > Advanced audio
Settings OptionsDescription
A.I.  sound Off/On
Equalizes overall  volume levels across  all
channels  and external inputs.
Surround Off/On
Enhances  audio  L/R response when listening
to stereo. Ideal for music and action movies.
Volume leveler Minimizes  volume disparity after  switching to
external inputs.
Distance to
wall Over 1ft(30cm)/
Up to 1ft(30cm)Over 1ft(30cm):  TV is on a stand. Keeps
current setup.
Up to 1ft(30cm):  TV is mounted. Reduces  low
frequency level to prevent resonance.
TV speakers Off/OnEnables the TVs built-in speakers.
Switches  to Off when using external
speakers.
A.I. sound, Surround, Volume leveler, and
Distance to wall do not work if Off is selected.
HDMI in Digital/
Comp./Video
The default  setting  is Digital for the HDMI 
connection. (Digital input signal)
Select audio  input terminal when a DVI cable is
connected along  with an analog  audio  input
signal.
161  
						

							All settings
Audio
DTV  language  and  SAP settings
 MENU  Menu > Audio  > DTV language  and  SAP settings
Settings OptionsDescription
Preferred
language
English /
Spanish/
French Selected preferred language is used for automatic
selection  of audio  service.
Preferred audio
type
Main Audio /
Hearing
Impaired/
Visually
Impaired Selected preferred audio  type is used for
automatic selection  of audio  service.
162  
						

							All settings
Audio
DIGITAL  AUDIO OUT terminal
You can enjoy your  Home Theater  by connecting a Dolby Digital (5.1 channel) decoder
and Multi Channel amplifier to the DIGITAL AUDIO OUT terminals.
Depending on your  DVD player and DVD-Audio software the copyright protection
function  may operate and disable optical output.
When an ATSC channel  is selected,  the output from the DIGITAL AUDIO OUT jack
will be Dolby Digital. When an NTSC channel  is selected,  the output will be PCM.
When playing a movie on SD Card Movie player,  when the sound has been
recorded  in Dolby Digital, the output from the DIGITAL AUDIO OUT terminal will be
Dolby Digital. When the sound is recorded  in other formats, the output will be PCM.
163  
						

							All settings
Network
Network settings (1)
 MENU   Menu  > Network
Settings OptionsDescription
Connection test
 Checks for proper network  connection, settings
and communication to the Internet & server.
Network 
connection
Ethernet
cable /Wireless 
(WiFi)
Select Network type.
164  
						

							All settings
Network
Network settings (2)
 MENU   Menu  > Network
Settings OptionsDescription
Wireless
network
settings
 This setting  is performed only when Wireless
(WiFi) is selected in Network connection .
Select the Access point from the list or select
Connection method with color key.
 Follow the directions on screen  to complete
the setting.
165  
						

							All settings
Network
Network settings (3)
 MENU   Menu  > Network
Settings OptionsDescription
IP  address/
DNS settings IP  setting
mode/
IP  address/
Subnet mask/ 
Default
gateway/
DNS setting
mode/ 
DNS/
Proxy setting
Select 
IP setting mode /DNS setting
mode  and set to Automatic , then  each IP
address is acquired Automatically.
[Manual setting]
Select  IP setting mode /DNS setting
mode  and set to Manual , then  select item and
press  OK.
Check the specifications  of the broadband
router and enter each IP  address. Or Enter each
IP  address as was specified  by the provider.
Proxy setting
Set  only if specified  by the provider. It is not
required for normal household use
Proxy address/Proxy port:  Setting is only required
if specified  by the provider.
166  
						

							All settings
Network
Network settings (4)
 MENU   Menu  > Network
Settings OptionsDescription
Network link
(Stream and
control  content
from networked
portable
devices.) VIERA  
network  name
Sets  your  favorite name  for this TV. This name
will be displayed on the screen  of the other
Network compatible equipment.
DLNA remote 
control
Enables Digital Media Renderer for playback  of
DLNA content.
DLNA remote
volume control
Sets  volume setting  in DMR operation
  Available only when Enable  is selected in 
  

DLNA remote control
Network 
remote control
Switches  remote control  of network  device
such as a smartphone to Disable  or Enable.
167  
						

							All settings
Network
Network settings (5)
 MENU   Menu  > Network
Settings OptionsDescription
Software
update
 Press OK  to start  the Software  update screen.
And follow directions on the screen.
* Set  Clock  first.
New  software
notice Off/
OnOn: When TV is turned On, update message is
displayed if available. Follow the directions on the
screen  to download.
Wake on LANOff /OnOn: Power  On  command is available  when
you use Remote control via IP .
Network status Displays Current settings  and status screen.
(Network  type/Wireless  settings/MAC  address/IP
Address etc.)
* Displayed items differ depending on the type of
network  connection.
168  
						

							All settings
Timer
Setting menu
The TV can automatically turn On/Off  at a designated date  and time.
If the Timer settings  are  grayed out, first set the clock and make  sure  Auto power
on is set to No.
1.Display the menu
 MENU  Menu
2.Select  Timer from menu  bar
Select desired menu  using 
/ from menu  bar  and press  
3.Select the item  and  adjust Select desired item using 
/ and adjust with /
169  
						

							All settings
Timer
Sleep  (Off  timer)
 MENU Menu > Timer
Settings OptionsDescription
Sleep 
(minutes) Off/15/30/
60/90
Selects how long the TV stays on before it
automatically turns off.
170