Panasonic VT50 Series Tv User Manual
Have a look at the manual Panasonic VT50 Series Tv User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
All settings Picture Pro settings (2) MENU Menu > Picture > Pro settings Settings OptionsDescription Red, Green, Blue hue -50 - 0 - +50 Adjusts the red/green/blue hue between light, pastel and vivid. Red, Green, Blue Saturation -50 - 0 - +50 Adjusts the difference of the red/green/blue color against its own brightness. Color detail adjustment Yellow, Cyan, Magenta hue Adjusts the yellow/cyan/magenta hue between light, pastel and vivid. Yellow, Cyan, Magenta Saturation Adjusts the difference of the yellow/cyan/ magenta color against its own brightness. Red, Green, Blue, Yellow, Cyan, Magenta luminance Adjusts the luminance of red/green/ blue/yellow/cyan/magenta areas. Black extension 0-15 Adjusts the dark shades of the image in gradation. 151
All settings Picture Pro settings (3) MENU Menu > Picture > Pro settings Settings OptionsDescription Gamma adjustmentS-curve/ 1.8/2.0/ 2.2 / 2.4/2.6 Gamma correction. Adjusts the intermediate brightness of the image. Panel brightness Low/Mid /HighSelects different levels of overall panel brightness. Contour emphasis Off/ OnAdjusts the contour emphasis of the image. AGC 0-15 Increases the brightness of dark signal automatically. Gamma detail adjustment Input signal levelAdjusts the IRE picture level in relation to the gain of the red, green & blue colors. Gain Adjusts the gain value of each Input signal level. Save as default Save all Picture (when Picture mode is Custom) and Pro settings adjustment. 152
All settings Picture Aspect adjustments MENU Menu > Picture > Aspect adjustments Settings OptionsDescription Screen format FULL/H -FILL/ JUST/4:3/ ZOOM Changes the format (aspect ratio). Lets you choose the aspect depending on the format of received signal. HD size Size 1 /Size 2Selects between 95 % (Size 1) or 100 % (Size 2) for the scanning area with High Definition signal. H size Size 1 /Size 2Adjusts the horizontal display range to reduce noise of both side edges of an image. Size 2: Adjusts the image size according to the aspect mode to reduce noise. Aspect mode: 4:3 The width will be decreased on both sides to reduce noise. Aspect Ratio: FULL/JUST(H-FILL/ZOOM) The width will be increased on both sides to reduce noise. Zoom adjustments Adjusts vertical alignment and size when aspect setting is ZOOM. 153
All settings Picture PC adjustments (1) MENU Menu > Picture > PC adjustments Settings OptionsDescription Reset to defaults Resets all PC adjustments to factory default settings. Sync H & V The H and V sync signals are input from the HD/VD connector. On green Uses a synchronized signal on the Video G signal, which is input from the G connector. Dot clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred. H-position Adjusts the horizontal position using left/right cursor button. V-position Adjusts the vertical position using left/right cursor button. 154
All settings Picture PC adjustments (2) MENU Menu > Picture > PC adjustments Settings OptionsDescription Clock phase Alleviates the problem if the whole picture appears to flicker or is blurred. First adjust the Dot Clock to get the best possible picture, then adjust the Clock phase so that a clear picture appears. It may not be possible to display a clear picture due to poor input signals. Input resolution Switches to wide display and selects the appropriate screen resolution. VGA (640 x 480 pixels), WVGA (852 x 480 pixels), XGA (1,024 x 768 pixels), WXGA (1,280 x 768 pixels) Options change depending on signals. H-frequency V-frequency Displays the H (Horizontal)/V (Vertical) frequencies. Display range Horizontal: 15 - 110 kHz Vertical: 48 - 120 Hz 155
All settings Picture HDMI settings MENU Menu > Picture > HDMI settings Settings OptionsDescription HDMI/DVI RGB range (HDMI) Auto / Standard (16 -235)/ NonstandardPrevents the blown out highlights and blocked up shadows when a wide-range signal is received. Selects between standard RGB range (16 -235 bits) or non-compliance (0-255 bits). Auto: Switches the RGB range (Standard (16 -235)/Nonstandard) depending on the HDMI signal information. Content type (HDMI) Off /Auto/ Photos/ GraphicsSets content type to each HDMI input. Auto: Switches content type automatically depending on the HDMI signal information. Photo: Best setting for JPEG viewing. Graphics: Best setting for On-Screen display of connected equipment. 156
All settings Picture Advanced picture (1) MENU Menu > Picture > Advanced picture Settings OptionsDescription 3D Y/C filter Off/On Minimizes rough edges (dot crawl) in the picture from a composite source. Color matrix SD/HD Selects image resolution of component - connected devices. SD: Standard Definition HD: High Definition Only used with 480p video signal. Block NR Off/On/Auto Reduces noise of specific digital signals of DVD, Cable box, etc. Mosquito NR Off/On Reduces HDTV flicker noise in the contoured sections of a compressed image. Motion smoother Off/Weak/ Medium/ StrongImproves motion picture quality by reducing motion blur. 1080p pure directOff /OnEnables the support of a 4:4:4 digital video format signal. Use only with a 4:4:4 capable source. Note: This function is available only for HDMI 1080p input. Not in use when no signal is received, input signal is YCbCr 4:2:2, or while 3D mode. Block NR and Mosquito NR does not work if On is selected. 157
All settings Picture Advanced picture (2) MENU Menu > Picture > Advanced picture Settings OptionsDescription Black level Light/Dark Select Dark when details are washed out in dark areas of picture from external source. Valid only for external input signals. 3:2 pulldown Off/On/Auto Reduces motion jitter in film-based content by transforming 24 fps to 30 fps (non -HDMI). 24p Direct in 96Hz*/60Hz/ 48Hz *2D mode only96Hz/48Hz: Achieves more cinematic playback by reproducing the movie contents at 2 or 4 times the speed of 24 frames per second. If flicker is seen using 48Hz, please use 60Hz or 96Hz. 158
All settings Audio Setting menu Adjust audio quality. 1.Display the menu MENU Menu 2.Select Audio from menu bar Select desired menu using / from menu bar and press 3.Select the item and adjust Select desired item using / and adjust with / * Shows the functions that can be adjusted. * Some functions will be disabled depending on the type of input signal. Reset to defaults will be grayed out if no changes are made. 159
All settings Audio Basic settings MENU Menu > Audio Settings OptionsDescription Reset to defaults Resets Bass, Treble, and Balance adjustments to factory default settings. Bass Increases or decreases the bass response. Treble Increases or decreases the treble response. Balance Emphasizes the left / right speaker volume. 160