Panasonic Ventilating Fan Fv08vsl2 Installation Instructions

INSTALLATION     (BETWEEN JOIST MOUNTING ) CONTINUED3. Insert the fan body between joists.
    Make sure the fan body is level and square
    (perpendicular) with the joists. (Fig.17)
CAUTION:
Backside of flange should mount directly to bottom of
joist.
5. Secure the suspension bracket to fan body by using
    screws    (ST4.2X12). (Fig.19) 4. Secure the suspension bracket to joists by using long
    screws (ST4.2X20). (Fig.18, Fig.19)
6. Follow step 5 to 11 of installation   (page 7~  page 8)
    to...

INSTALLATION    (WOODEN HEADER ) CONTINUED4. Follow step 5 to 11 of installation   (page 7
~ page 8)
    to complete the installation work.
1. Installation in existing construction.
    Installing the fan body in an existing building requires an accessible area (attic or crawl space) above
    the planning installation location or existing ducting and wiring.
(1) To install the fan body, follow the procedures described in lnstallation   . Take the following
      precautions before installation.
(3)...

MAINTENANCE   (CLEANING ) 
WARNING:
CAUTION: Disconnect power source before working on unit. Routine
maintenance must be done every year. 1. Never use petrol, benzene, thinner or any other such
    chemicals for cleaning the ventilating fan.
2. Do not damp water to enter motor.
3. Do not soak resin parts in water over 140  F(60  C).
1. Remove grille. (Squeeze mounting spring and pull down
    carefully.) (Fig.22)
2. Wash and clean grille. (Use non-abrasive kitchen detergent,
    wipe dry with new cloth.)...

MAINTENANCE    (REPLACEMENT OF LAMP ) CONTINUED 
1. Remove grille. (Squeeze mounting spring and pull 
    down) (Fig.22 of page 13)
2. Disconnect connector    or connector     from
    lighting unit. (Fig.26) 3. Replace the fluorescent lamp (Panasonic
    FHT32E35 32W) or the 4 W night lamp, 
    connect the connector     or connector     and 
    replace the grille. (Fig.27) PRACTICAL GUIDE TO INSTALLATION Fig. 26
Plug connector
Plug connector
Receptacle Receptacle
Fluorescent lamp 4 W Night Lamp
14 4...

PRODUCT SERVICE
Warning Concerning Removal of Covers.
The unit should be serviced by qualified technicians only.
Your product is designed and manufactured to ensure a minimum of maintenance.
Should your unit require service or parts, call Panasonic Call Center at 1-866-292-7292 (USA)
or 1-800-669-5165 (Canada).  32
FV-10VSL2 SPECIFICATIONS
Model      Air
directionVoltage
    (V)
Frequency
     (Hz)   Duct
diameter
 (inches) Noise
(sones)  Power consumption (W)
 Fluorescent lamp
 Lighting unit
 Fan body...

T0212-0   08VSL2420Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
www.panasonic.com
Panasonic Canada lnc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
Printed in China Panasonic corporation 2012