Panasonic Ventilating Fan Fv 05vs1 Installation Instructions

							11
INSTALLATION WALL INSTALLATION-VII I( ) CONTINUEDINSTALLATION WALL INSTALLATION-VII I( ) CONTINUED
4. Insert the suspension bracket into fan body (refer to
step 2 of installation , page 4 .I)
5. Secure the fan body to the studs by using long screws
(ST4.2X20) ( step 5 to step 7 of installation of
page 7). (Fig. 21)refer toII
Fig. 21
2 Long screws
(ST4.2X20)
2 Long screws
(ST4.2X20)
Fig. 22
INSTALLATION WALL INSTALLATION-VIII II()INSTALLATION WALL INSTALLATION-VIII II()
Fig. 232 Long screws (ST4.2X20) 4 Long screws
(ST4.2X20)
2. Insert the suspension bracket into bracket cover of adaptor
side and the back of the fan body (refer to Fig.12-1 of
page 8).
3. Insert the fan body between studs. Make sure the fan body
is level and square(prependicular) with the stud. Ensure
that distance C 3/16 inch (5mm).
4. Secure the suspension bracket to studs by using long
screws (ST4.2X20). (Fig. 22, Fig. 23)
5. Secure the suspension bracket to fan body by using
screw (ST4.2X10) (refere to Fig. 4 of page 5).II
1. Before installation, Secure the fan body to adaptor by
using thumb screw. (Fig.1 of page 4)
IMPORTANT:Ensure distance C is 3/16 of an inch (5 mm) during the
installation process as follows.
inches (mm)Adaptor
Wall
Stud
C3/16 (5)
Fig. 20
2 Long screws
(ST4.2X20) 2 Long screws
(ST4.2X20)
Stud
3. Secure it to studs by using long screws (ST4.2X20).
(Fig. 20)
6. Refer to the Fig. 12-3, 12-4 (page 9) and Fig. 7
(page 8) of the original installation instruction to
complete the motor/grille assembly installation.
6. Refer to the Fig. 12-3, 12-4 (page 9) and Fig. 7
(page 8) of the original installation instruction to
complete the motor/grille assembly installation. 
						

							12
INSTALLATION WALL INSTALLATION-IX III()INSTALLATION WALL INSTALLATION-IX III()
This installation method is only for 12-inch and 24-inch
joists.
2. Remove the backing paper from the spacer, attach the
spacer to the flange of the fan body. The holes on the
spacer should line up with the holes on the flange.
(Fig. 24)
3. Secure the suspension bracket into bracket cover of
the adaptor (for 24-inch joists, refer to Fig. 2 on page 4).
Secure the suspension bracket into bracket cover
at the back of the fan body (for 12-inch joists, Fig. 25-2).I
1. Before installation, Secure the fan body to adaptor by
using thumb screw. (Fig.1 of page 4)
Warning Concerning Removal of Covers.
The unit should be serviced by qualified technicians only. No service information is provided for customers.
Your product is designed and manufactured to ensure a minimum of maintenance. However, should your
unit ever require service, a nationwide system of factory service centers and AUTHORIZED INDEPENDENT
SERVICE CENTERS is maintained to support your products warranty.
(In the U.S.A.,call 1-866-292-7292 to Customer call center.)
P ODUCT SE VICERRP ODUCT SE VICERR
4. Secure the suspension bracket to the wall stud using long
screws (ST4.2X20). Secure the fan body and spacer
to stud using long screws (ST4.2X20). (Fig. 25)
6. Refer to the Fig. 12-3, 12-4 (page 9) and Fig. 7
(page 8) of the original installation instruction to
complete the motor/grille assembly installation.
X0806-1047 08VSA1420A
PANASONIC CONSUMER ELECTRONICS COMPANY
Division de Panasonic Corporation of North America,
PANASONIC CANADA INC.
5770 Ambler Driver, Mississauga, ON L4W 2T3
www.panasonic.com One Panasonic Way, Secaucus, NJ 07094
Fig. 25-3Fan bodyStud
Spacer
Fig. 24Spacer
Backing paper
AdhesiveSpacer
Fig. 25-22 Long screws
(ST4.2X20)2 Long screws
(ST4.2X20)
Suspension
bracketI
Fig. 25-1
2 Long screws
(ST4.2X20) 2 Long screws
(ST4.2X20)