Panasonic Ventilating Fan Fv 05vfl1 Installation Instructions

II I IIIII I
READ AND SAVE THESE INSTRUCTIOINS.
SpecificationsDimensions
Description
INSTALLATION
INSTRUCTIONS
9-12
FV-05VFL1
FV-09VFL1FV-07VFL1
FV-11VFL1Ventilating Fan/
Light Combination
Maintenance (Replacement of Fluorescent Lamp or Night Lamp)
Maintenance (Cleaning)
Product Service12
13
14
8-9 5-84
4 3 32 2
Please
readthese
instructionscarefullybeforeattempting
toinstall,
operate or service the Panasonic Ventilating Fan. Failure to comply
with instructions couldresult in personal injury and/or...

DESCRIPTION
2
11 1
1 11
11 1
connector
Long screws
Clamp
Quantity Appearance
Part name
Grille
Quantity
Appearance
Part name
2
FV-05VFL1 FV-07VFL1
FV-09VFL1 FV-11VFL1
(M4x30)
(M4x8)
The light unit is an energy-saving, lighting device which uses two 13W fluorescent lamps and produces almost the
same illumination as a standard 100W incandescent lamp.
Lamp cover
Light unit
13W
Fluorescent
lamp
4W
Incandescent
lamp
Light kit
set plate
(M4x16)
2
2
8
1
(M4x6)
plate
Short screwsI
Short screwII
Short screwsIII2...

79.2(3 1/8)
177.4 (7)
265~385 (10 13/32~15 5/32)
3
DIMENSIONS
12
148 (5 13/16)
Unit: mm(inches)
No. No.
120
60Hz
V Model No.Air direction
ExhaustAir deliver at
0.1" WG(CFM)
Bracket cover
Suspension plate
Part name Part name
Grille
Thumb screw Body
DamperAdaptor
Junction box
Night lamp connector
13
Light unit15
Lamp cover17
Light kit set plate1914
16
1813W lamp connectorFluorescent lamp (13W x 2)
Night lamp (4W x 1) Motor connector3 inch adaptor connector
FV-05VFL1 FV-07VFL1
FV-09VFL1 FV-11VFL1...

4
45o
UNPACKING
Fig. B
Floor
equipment
Do not install above or
WARNING:
CAUTION:
Fig. A
Adaptor
Refer to the SuppliedAccessories list to verify that all parts are present.
Unpack andcarefully remove unit from carton.
1. Do not install this ventilating fan where air temperature may exceed40 C (104 F).oo
2. Make certain that the electric service supply voltage is 120V, 60 Hz.
3. Follow all local electrical and safety codes, as well as the National Electrical Code (NEC) and
the Occupation Safety andHealth...

Leadwires
Green wires
Wire nutJunction boxConduit
Duct
Fig. 2
Junction box cover
Ceiling joist
Long screwAdaptor Ceiling joist
Fig. 1
Damper
Remove
tape4Inch
Adaptor
Connection methodfor 3 inch adaptor connector
5. Install circular duct (4 inch) or 3 inch adaptor connector
andsecure it with duct tape. (Fig.3.1, Fig.3.2)
CAUTION: Wiring diagram
Joist spacing A shouldbe between 380mm (14 31/32inch) and
265mm(10 7/16 inch).
Keep the distance B (21.6mm,7/8 inch) for the thickness of
ceiling board.
2. Remove...

Fig. 7
Fan
Plug connector
Thumb screw
Ceiling joist Fan body
mm (inches)
Adaptor
ScrewScrew driver
Ceiling joist
Fan body Ceiling joist
Fan body
of page 5. 1.Loosen 4 screws (but do
not remove them from
blower).(Fig.5-1)
When mounting
body and blower
separately
8. Secure fan body to adaptor using two thumb screws.(Fig.7)
9. Connect plug connector to receptacle .(Fig.8)II
Make sure that body "Claws" are property inserted into adaptor
slots.IMPORTANT:
6. Remove ceiling section. (Fig.4)
7. Insert...

Ceiling joist Ceiling joist
Suspension bracket II
Suspension bracket III
Ceiling joist
Suspension bracket II4-Long screws
Suspension bracket III
4W Night LampFluorescent lamp
Light unit
10. Secure fan body to ceiling joists using long screws (M4X30) in
11. Secure suspension bracket andto the fan body using 2
short screws (M4x6). (Fig.10)
12. Fix the light kit set plate to the frame using 4 short screws
(M4x6). (Fig.11)II III
I
III II
13. Insert the plug connector andplug connector into the
receptacle...

Fan body
Thumb screws
Mounting springLight unit Lamp Cover
Fig. 13
8
1. Before installation, secure adaptor to fan body using two
thumb screws. (Fig.14)
Fig. 14
Fig. 16
15. Insert the lamp cover to the grille andattach the grille to the
fan unit. (Fig.13)
3. Insert the plug connector andplug connector into the
receptacle andreceptacle respectively, andattach the
light unit to the fan unit with 2 short screws (M4x16) and1
short screw (M4 x 8). Insert the fluorescent lamps and
screw the night lamp into the...

CAUTION:
To install the ventilating fan, follow the procedures described in lnstallation II. Take the following precautions before
installation.
Long screwsJunction box cover
mm (inches) Ventilating fan
AdaptorCeiling joist Header Ceiling joist
Wiring diagram CAUTION:Adaptor
Fan unit
Red
Capacitor
WhiteMotorBlackGreen
Junction box
Night Lamp
BallastLampBallastLamp
Green
Earth ground
Black
WhitePower Supply
AC 120V 60Hz
Power Supply
AC 120V 60Hz
Light unit
,
INSTALLATION (WOODEN HEADER) CONTINUEDII
4....

Ceiling joist
Ceiling
Long screws
Adaptor
Duct
Junction box cover Conduit mm (inches)Ceiling
Suspension bracket I
Suspension bracket II
CAUTION:
Fig. 20
Fig. 21
Fig. 22
3 inch adaptor
connector Duct tape
10
Before installation, provide inspection and maintenance access at a location that will not interfere with
installation work shown in installation .II
First, remove ceiling section according to Fig.4 of page 6.
Install ventilating fan.
2. Installation from accessible area above fan location.
Inspect...