Panasonic Vdr M30 Operating Instructions Manual
Have a look at the manual Panasonic Vdr M30 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
121 QR34662 Playing Back a Play List (Play) 1Press the DISC NAVIGATION button. 2Press the MENU button. 3Choose “Play” on the “PlayList” menu screen, and then press the button. 4Use the “Start Playlist” screen to select the play list to be played back, and then press the button. The selected play list will be played back from the first scene. To cancel playback midway, press the button: The Disc Navigation screen of the play list being played back will appear. Note:If “Repeat Play On” is specified, the play list will be repeatedly played back (See page 132).Start PlayList 01 AUG 30 2003 12 : 3 0PM 02 SEP 10 2003 8 : 00AM ENTER RETURN03 SEP 12 2003 9 : 30AM 04 SEP 20 2003 3 : 15PM PlayList RAM ENTER RETURN Creat eEd i t Sw i t c hPlay Ti t leDel e teETC 12:30PM AUG 30 2003 VDR-M30PP_GB.book Page 121 Friday, March 14, 2003 8:53 PM
122 QR34662 Adding Scenes to Play List (Editing Play List) You can later add scenes to the play list. 1Press the DISC NAVIGATION button. 2Press the MENU button. 3Choose “Edit” on the “PlayList” menu screen, and then press the button. 4Use the play list select screen to select the play list to which you wish to add scenes, and then press the button. The scenes of the program that was displayed in step 1 will appear in the upper row, and the scenes of selected play list will appear in the lower row. Note:If the DISPLAY button is pressed when the thumbnails are displayed, the recording date/time of the selected scene will appear across the bottom of screen. Press DISPLAY again to restore the previous screen. 5Tilt the joystick down to move the cursor to the lower row, and tilt it to left or right to select the point where the scene is to be inserted. 6Tilt the joystick up to move the cursor to the upper row, and tilt it to the left or the right to point the cursor to the scene to be added. 7Press the button to copy the scene. After adding scenes is completed, the edited play list will appear. Repeat steps 5-7 to add other scenes. 8Press the button: The screen for verifying exit will appear. Note:The cursor shows the position where the scene is to be added. You can also select multiple scenes (P.100).Pressing in the middle of adding scenes will display the screen for verifying an exit from “Edit PlayList”. Choose “YES” to exit the edition of play list. Choosing “NO” will restore the “Edit PlayList” screen. If you press the MENU button in step 5 or 6, the submenu screen for editing play list will appear. You can also use this submenu to add scenes (See page 104). PlayList RAM ENTER RETURN Creat eEd i t Sw i t c hPlay Ti t leDel e teETC Edi t PlayList 01 AUG 30 2003 12 : 3 0PM 02 SEP 10 2003 8 : 00AM ENTER RETURN03 SEP 12 2003 9 : 30AM 04 SEP 20 2003 3 : 15PM Edit PlayList PlayList No.01 A l l Programs004/014 007/007 ADD E X I T Edit PlayList PlayList No.01 A l l Programs004/014 008/008 AUG 30 2003 12 : 30 : 01PM Recording date/time Edit PlayList PlayList No.01 A l l Progr ams004/014 008/008 ADD E X I TInsertion position Scene to be added *1*2 *1: Number of scene before insertion position cursor *2: Number of all scenes on play list VDR-M30PP_GB.book Page 122 Friday, March 14, 2003 8:53 PM
123 QR34662 Deleting Scenes from Play List (Editing Play List) 1Press the DISC NAVIGATION button. 2Display the editing screen of the play list to be edited. Perform steps 2 −4 on page 122. 3Move the cursor to the play list in lower row, and place the cursor on the scene to be deleted. 4Press the button. Repeat steps 3 and 4 to delete other scenes. 5Press the button: The screen for verifying exit will appear. Note:You can also select multiple scenes (P.100).Place the cursor on scene to be deleted, and then press the DELETE button on remote controller: You can also delete the scene on the play list. Adding Scenes Using Submenu for Editing (Editing Play List) You can use the menu screen to add scenes to a play list. 1Press the DISC NAVIGATION button. 2Display the editing screen of the play list to be edited. Perform steps 2 −4 on page 122. 3From the play list in lower row, select the position where you wish to insert a scene. 4Select the scenes to be added from the upper row. 5Press the MENU button. 6Choose “Add”, and then press the button. Repeat steps 3-6 to add other scenes. 7Press the button to quit. Note:The selected scenes will be added in the insertion position. You can also select multiple scenes (P.100). Edit PlayList PlayList No.02 A l l Programs004/014 008/008 EX I T DELETE Edit PlayList PlayList No.02 A l l Progr ams004/014 007/007 EX I T DELETE Edit PlayList PlayList No.03 A l l Programs004/014 007/007 ADD E X I T Scene to be added Insertion position Ed i tA l l Progr ams ENTER RETURN 007/007 PlayList No.03004/014 Ex i tAdd Edit PlayList PlayList No.03 A l l Progr ams004/014 008/008 ADD E X I T VDR-M30PP_GB.book Page 123 Friday, March 14, 2003 8:53 PM
124 QR34662 Deleting Scenes Using Submenu for Editing (Editing Play List) You can delete scenes from play list on the editing screen. 1Press the DISC NAVIGATION button. 2Display the editing screen of the play list to be edited. Perform steps 2 −4 on page 122. 3Move the cursor to the play list in lower row. 4Select the scene to be deleted, and then press the MENU button. 5Choose “Delete” on the “Edit” menu screen, and then press the button. Repeat steps 3-5: other scenes can be deleted. 6Press the button: The screen for verifying exit will appear. Note:If all scenes on play list are deleted, the play list itself will also be deleted. You can also select multiple scenes (P.100). Selecting Scenes Using Submenu for Editing (Editing Play List) You can specify the range of scenes when adding or deleting consecutive multiple scenes to/from play list. This “Select” menu item is useful when selecting consecutive multiple scenes in items for adding or deleting scenes using menu on page 114. 1Press the DISC NAVIGATION button. 2Display the editing screen of the play list to be edited. Perform steps 2 −4 on page 122. 3Specify the first scene of those you wish to select, and then press the MENU button. 4Choose “Start → Current”, “Current → End”, “All” on the “Select” menu screen, and then press the button. Note:See page 114 for the status of scenes to be selected. 5Press the button: The screen for verifying exit will appear. Edit PlayList PlayList No.04 A l l Programs001/014 007/007 ADD E X I T Ed i t PlayList No.04 A l l Progr ams001/014 007/007 ENTER RETURN Ex i tDelete Edit PlayList PlayList No.04 A l l Programs004/014 007/007 ADD E X I T Se l ect PlayList No.03 A l l Progr ams001/014 007/007 ENTER RETURN Start– Current Cu r r en t – End All VDR-M30PP_GB.book Page 124 Friday, March 14, 2003 8:53 PM
125 QR34662 Arranging Order of Scenes (Move) You can move scenes only when “Category: All” is specified. 1Press the DISC NAVIGATION button. 2Press the MENU button. 3Choose “Switch” on the “PlayList” menu screen, and then press the button. 4Select the scene to be moved. 5Press the MENU button. 6Choose “Scene”, “Edit”, “Move”, and then press the button. 7The “Move Scenes” screen will appear: If you a r e s u r e y o u w a n t t o m o v e the scene, press the button. If you want to change the scene to be moved, you can change it on this screen. 8Move the “ ” mark to the position where you wish to move the scene, and then press the button. 9The screen for verifying move will appear: Choose “YES”, and then press the button. Choose “NO” to cancel move. After Yes or No setting, the scene select screen will be restored. Repeat steps 7 - 9 to move another scene. 10Press the button to quit. Note:If you press the MENU button before pressing the button in step 7, the submenu screen will appear. You can also move multiple scenes (P.100).Stills can also be moved.Only scenes on play list can be moved. Scene RAM ENTER RETURN DeleteEd i tCopySe l ectDe t a i l Thumbna i lSk i pFadeCombineDivideMoveETC Se l ect I nsert Po i n t 006/ 019 RAM ENTERCANCEL ENTER Move scenes? Move Scene YESNO VDR-M30PP_GB.book Page 125 Friday, March 14, 2003 8:53 PM
126 QR34662 Changing Title of Play List (Title) The play lists have serial numbers in the order you have created them, along with the created dates/times: You can change this title at any time. 1Press the DISC NAVIGATION button. 2Press the MENU button. 3Choose “Title” on the “PlayList” menu screen, and then press the button. 4Use the “Playlist Title” screen to select the play list whose title you wish to change, and then press the button. See “Changing Title of Program (Title)” on page 117 for how to enter a title. 5The screen for verifying exit will appear: Choose “YES” and then press the button. 6Press the button to quit. After changing the title, the Disc Navigation screen on the play list whose title has been changed will appear. Note:The registered title can be changed at any time using the same procedure. Deleting Play List (Delete) 1Press the DISC NAVIGATION button. 2Press the MENU button. 3Choose “Delete” on the “PlayList” menu screen, and then press the button. 4Use the “Delete Playlist” screen to select the play list you wish to delete, and then press the button. 5The screen for verifying deletion will appear: Choose “YES”, and then press the button. Choose “NO” to cancel deletion. After Yes or No setting, the Disc Navigation screen of all programs will be restored. Note:Even if you delete a play list, the original scenes stored on disc will not be deleted. PlayList Ti t le 01 AUG 30 2003 12:30PM 02 SEP 10 2003 8 : 00AM ENTER RETURN03 SEP 12 2003 9 : 30AM 04 SEP 20 2003 3 : 15PM ENTER Finish title setting? TITLE a t a Pa r k YESNO 001/ 008 PLAY RAM 01 at a Park Delete PlayList 01 AUG 30 2003 12:30PM 02 SEP 10 2003 8 : 00AM ENTER RETURN03 SEP 12 2003 9 : 30AM 04 SEP 20 2003 3 : 15PM Delete PlayList Delete PlayList? PlayList No. 01 AUG 30 2003 12: 30P M ENTER YESNO VDR-M30PP_GB.book Page 126 Friday, March 14, 2003 8:53 PM
127 QR34662 Go To From the Disc Navigation screen, you can jump to the first scene or last scene. Top (End) 1Press the DISC NAVIGATION button. 2Press the MENU button. 3Choose “Top” or “End” on the “Go To” menu screen, and then press the button.Go T o RAM ENTER RETURN En dETC To p 014 / 014 All Programs PLAY RAM (When “End” is specified) VDR-M30PP_GB.book Page 127 Friday, March 14, 2003 8:53 PM
128 QR34662 Disc or Card Management Verifying Remaining Free Space on Disc or Card (Capacity) You can find out how long you will be able to record on one side of disc or on card. 1Press the DISC NAVIGATION button. 2Press the MENU button. 3Choose “Capacity” on the “Disc” or “Card” menu screen, and then press the button. *1With DVD-R disc: The quality mode first used for recording with disc will appear. *2With DVD-R disc: This will not be displayed. 4Press the button to quit. The Disc Navigation screen will be restored. Note:With a write-protected disc or locked card, the remaining space will always be displayed as “0”. Protecting Disc from Writing (Protect Disc) You can protect a DVD-RAM disc in order to prevent recorded images from being erased or edited by mistake. 1Press the DISC NAVIGATION button. 2Press the MENU button. 3Choose “Protect Disc” on the “Disc” menu screen, and then press the button. 4The screen for verifying protection will appear: Choose “YES”, and then press the button. Choose “NO” to cancel protection. After “YES” or “NO” setting, the Disc Navigation screen will be restored. Note:To release disc protection, perform the same procedure as above: The screen for verifying the release of protection will appear. Choose “YES” to release the protection. Further recording will not be possible on protected disc until the protection is released. Capac i t y Capac i t y : 90% Approx. V I DEO(XTRA) : 17 min V I DEO( F I N E ) : 2 6min V I DEO( S T D ) : 5 4min PHOTO : 996 RETURN Capac i t y Capac i t y : 96% Approx. PHOTO( F I N E ) : 4 6 2 PHOTO( NORM) : 9 2 4 PHOTO( ECO) :1848 RETURN (When using disc) *1 *2(When using card) Disc RAM ENTER RETURN Ca pac i t yProtect DiscFormat DiscUpdate Cont rol I nfo.ETC ENTER Protect Disc YESNO Write protect disc? 001/ 019 All Programs PLAY RAM Disc protect icon VDR-M30PP_GB.book Page 128 Friday, March 14, 2003 8:53 PM
129 QR34662 Initializing DVD-RAM Disc or Card (Format Disc. format Card) If you want to erase all data on a recorded disc or card, you can initialize it rather than delete the data: Initialization is useful in this case, since it takes less time than deleting all data. The initialized disc or card can be used again. 1Press the DISC NAVIGATION button. 2Press the MENU button. 3Choose “Format Disc” or “Format Card” on the “Disc” or “Card” menu screen, and then press the button. The screen for verifying “Format Disc” or “Format Card” will appear. 4Choose “YES”, and then press the button. Choose “NO” to cancel initialization. When initializing one side of the disc is complete, the DVD Palmcorder will return to the recording pause status. Note:Initialization will delete all the recorded contents on disc or card: Be careful not to delete data by mistake. Be sure to use the AC adapter/charger when initializing disc or card so that the DVD Palmcorder is not turned off midway. If initialization is interrupted by power turning off, the disc or card will not be initialized correctly, or it may be damaged. It may not be possible to initialize a disc with many scratches or dirt: Such a disc cannot be used. If you use a brand-new DVD-R disc, message “Disc is not formatted” will appear: Initialize the disc, following the subsequent messages (See page 44). This DVD Palmcorder may not recognize some discs or cards that have been initialized on PC or a device other than this DVD Palmcorder. If you attempt to initialize a disc or card in this DVD Palmcorder when it is connected to PC via USB cable, the disc or card may not be initialized and may be unusable on this DVD Palmcorder. ENTER A l l data wi l l be deleted. Format the disc now? For mat Disc YESNO ENTER A l l data wi l l be deleted. Format the card now? For mat Card YESNO (When using card) (When using DVD-RAM disc) VDR-M30PP_GB.book Page 129 Friday, March 14, 2003 8:53 PM
130 QR34662 Updating Control Information of DVD-RAM Disc Disc Navigation in this DVD Palmcorder handles information on scenes, such as skip, fade, in a particular manner. If you use another device to edit a disc recorded on this DVD Palmcorder, and then use the data again with Disc Navigation in this DVD Palmcorder, the Disc Navigation may not appear normally. If this happens, use the Update Control Info function to update the data. 1Press the DISC NAVIGATION button. 2Press the MENU button. 3Choose “Update Control Info.” on the “Disc” menu screen, and then press the button. The screen for verifying “Update Control Info.” will appear. 4Choose “YES”, and then press the button. The message for proceeding will appear, and then the Disc Navigation menu screen will be restored. A black screen may appear while the message for updating is displayed. Choose “NO” to cancel updating. 5Press the button to quit. Note:Be sure to use the AC adapter/charger when updating the control information so that the DVD Palmcorder is not turned off midway. If updating of control information is interrupted by power off, the control information will not be updated correctly. It may take time to update the control information if the disc has many recorded scenes. Pressing the button on the screen for verification will restore the thumbnail display screen. ENTER Upda te Con t r o l I n f o? Upda te Con t r o l I n f o. YESNO VDR-M30PP_GB.book Page 130 Friday, March 14, 2003 8:53 PM