Home > Panasonic > Telephone > Panasonic Va-309, Va-824 Key Telephone System Operating Instructions

Panasonic Va-309, Va-824 Key Telephone System Operating Instructions

Here you can view all the pages of manual Panasonic Va-309, Va-824 Key Telephone System Operating Instructions. The Panasonic manuals for Telephone are available online for free. You can easily download all the documents as PDF.

Page 11

Making Calls 
To make a call 
I 
\I, 
@ 1. Press any available line key 
* Listen for the outside dial tone. The line indicator will light up green. 
t 
kil 2. Press One-touch key 
* The telephone number stored on this key will be dialed. 
3. Lift handset and speak when answered 
To erase a number stored 
+ 
1. Press ON/OFF key 
* Listen for the intercom dial tone from speaker. The ON/OFF indicator will light 
UP. 
2. Press AUTO key 
3. Press the One-touch key you wish to erase 
4. Press HOLD key 
5....

Page 12

Making Calls 
With system speed dial you use a two digit address number instead of dialing the whole telephone number. 
You can use the address number for system speed dial on all system telephones. 
Up to 90 address numbers for system speed dial from 00 to 89 can be stored, and a telephone number can 
be stored even while the other telephones are being used. 
Telephone numbers of up to 16 digits including x , # , FLASH and PAUSE can be stored. 
If a new telephone number is stored, the old telephone...

Page 13

Making Calls 
To make a call 
f 
1. Press any available line key 
* Listen for the outside dial tone. The line indicator will light up green. 
2. Press AUTO key 
3. Dial the address number (2 digits) from 00 to 89 
* The telephone number stored in the address will be dialed. 
4. Lift handset and speak when answered 
To erase a stored number 
1. Press ON/OFF key 
l Lisfen for the intercom dial tone from speaker. The ON/OFF indicator will light 
UP. 
2. Press AUTO key 
3. Press address number ( 0 0 to 8 9...

Page 14

Answering Calls 
, 
The way calls are answered is different depending on whether or not a ringing tone is assigned to your 
telephone for incoming outside calls. 
To answer a call on a teleDhone which rinas 
cs 
m simply lift handset or press ON/OFF key and speak 
If automatic answering has not programmed (system program), press the line key 
(and then lift the handset). 
To answer a call on a telephone which does not ring 
6 
m 1. Lift handset 
(If the telephone having the speakerphone, not necessary to...

Page 15

Answering Calls 
, 
You can transfer an outside call to another extension. 
Transferring a call to another extension 
HOLD 
a 
1. Press HOLD key to place the call on hold 
* The line indicator will flash green. 
2. Dial the desired extension number 
3. When answered, indicate the number of the line being 
transferred 
4. The transferee then presses the red-flashing line key 
Alternatively 
HOLD 
a 
CONF 
!a 
If the extension is busy 1. Press HOLD key to place the call on hold 
2. Dial the desired...

Page 16

Answering Calls 
Three-party conference 
You can converse with three parties at the same time. 
Put the conversation initiated between two parties on hold and call the other outside number. 
Then by pressing CONF key when answered you can have a three-party conference. 
Conferences can involve two outside lines and one extension or one outside line and two extensions. Also, it 
can be held among the three extensions. 
1. Press HOLD key to place the call on hold 
l The line indicator will flash green. 
f...

Page 17

Making Calls 
You can make a voice call to another extension through the speaker of that telephone. 
Dial the extension number, and after a splash tone(one short tone) from your party’s telephone your voice can 
be heard. 
1. Lift handset 
* Listen for the intercom dial tone. 
2. Dial the desired extension number 
* Splash tone will sound from called party’s telephone. 
Both /NT indicators lit. 
i 
3. Stan speaking 
* Your voice will be heard through the speaker on your party’s telephone. 
You can change...

Page 18

Paging 
-.. 
. 
You can page through the speaker of the other telephones. This can be to telephones in a specific zone. 
There can be three zones(system programming), the paging numbers for which are # 0 1 , # 0 2 and # 0 3 . 
1. Lift handset 
l Listen for the intercom dial tone. 
2. Press # 0 1 , # 0 2 or # 0 3 , for the desired paging zone 
* IN T indicator will l@h t up. 
3. Make your announcement into the mouthpiece of handset 
When answering a paging call, pick up the handset and press JC key twice....

Page 19

Answering Calls 
When answering to a voice call or tone call, simply lift handset. 
(If the telephone having speakerphone, simply press the ON/OFF key.) 
You can answer to a call without lifting handset (on-hook). 
Before receiving any calls check to see that the microphone indicator lights up. 
If it does not light up (microphone is off), press the MIC key so that the microphone indicator lights. 
Speak through the built-in microphone and speaker 
l MIC indicator will flash. 
If MIC key is not pressed...

Page 20

Answering Calls 
You can respond to zone or all zone paging on any extension. 
1. Lift handset 
2. Enter ** with dial key to respond to the paging 
You can put an intercom call temporarily on hold. During hold you can make a call or answer a call. 
However, paging, door box conversations and conferences cannot be put on hold. 
Putting an intercom call on hold 
Tell your party that you are about to put a call on hold and then press HOLD key 
l /NT ifldicator will f/ash. You will hear the contir~uous...
Start reading Panasonic Va-309, Va-824 Key Telephone System Operating Instructions

Related Manuals for Panasonic Va-309, Va-824 Key Telephone System Operating Instructions

All Panasonic manuals