Panasonic Upgrade Software Wj Asc960 Operating Instructions
Have a look at the manual Panasonic Upgrade Software Wj Asc960 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 37
37
***{ if REDUNDANT:YES is selected by front panel }
***{ switch. }
***{ Format: AlarmPort=, }
***{ port # = use 1 to indicate desired port (only one) }
***{ port # = use 0 to indicate ports not desired }
*AlarmPort=1,0
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Alarm Text Display format }
***{ Format:...](http://img.usermanuals.tech/thumb/58/68642/w64_wj-asc960_en_om_d-36.png "Page 37
37
***{ if REDUNDANT:YES is selected by front panel }
***{ switch. }
***{ Format: AlarmPort=, }
***{ port # = use 1 to indicate desired port (only one) }
***{ port # = use 0 to indicate ports not desired }
*AlarmPort=1,0
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Alarm Text Display format }
***{ Format:...")
![Page 39
39
Appendix 2
This appendix indicates the contents of the sample database – 01=multi_1.adm, 02=multi_2.adm, #=multi.gdm –
that is included on the CD-ROM.
Admin Console sample database (01=multi_1.adm) work sheet for Unit 1
[GX DEVICES]
ID Video Compensation Bitrate Model OSD
1 GX 1 ShortSwitch Port
WV-CS954
WV-CS954
WV-CS954
WV-CS954
WV-CS954
WV-CS954
WV-CS9546.144
2 GX 2 Short 6.144
3 GX 3 Short 6.144
4
5Logical #
1
2
3
4 GX 4 ShortTitle
C 1
C 2
C 3
C 4
C 5
C 6
C 7 6.144
5 GX 5 Short 6.144
6 6 GX 6...](http://img.usermanuals.tech/thumb/58/68642/w64_wj-asc960_en_om_d-38.png "Page 39
39
Appendix 2
This appendix indicates the contents of the sample database – 01=multi_1.adm, 02=multi_2.adm, #=multi.gdm –
that is included on the CD-ROM.
Admin Console sample database (01=multi_1.adm) work sheet for Unit 1
[GX DEVICES]
ID Video Compensation Bitrate Model OSD
1 GX 1 ShortSwitch Port
WV-CS954
WV-CS954
WV-CS954
WV-CS954
WV-CS954
WV-CS954
WV-CS9546.144
2 GX 2 Short 6.144
3 GX 3 Short 6.144
4
5Logical #
1
2
3
4 GX 4 ShortTitle
C 1
C 2
C 3
C 4
C 5
C 6
C 7 6.144
5 GX 5 Short 6.144
6 6 GX 6...")
![Page 40
40
[OPERATORS]
ID Password Priority Timeout Name Class
100 100 100 00:00:00 Normal 1: Normal
955 955 3 00:00:00 Super 2: Super
[DIGITAL RECORDER]
Admin Console sample database (02=multi_2.adm) work sheet for Unit2
[GX DEVICES]
Note:Actual MAC address that is indicated on a product should be entered to EA field. ID I/F IPA EA Encoder
Input
PortsDecoder
Output
PortsGXDIN
Input
Ports
1 0 192.168.3.10 00:00:00:00:00:00 1 - 4–
1 - 4Address
ABC
003
2 0 192.168.3.11 00:00:00:00:00:00 5 - 8–5 - 8
004
3 0...](http://img.usermanuals.tech/thumb/58/68642/w64_wj-asc960_en_om_d-39.png "Page 40
40
[OPERATORS]
ID Password Priority Timeout Name Class
100 100 100 00:00:00 Normal 1: Normal
955 955 3 00:00:00 Super 2: Super
[DIGITAL RECORDER]
Admin Console sample database (02=multi_2.adm) work sheet for Unit2
[GX DEVICES]
Note:Actual MAC address that is indicated on a product should be entered to EA field. ID I/F IPA EA Encoder
Input
PortsDecoder
Output
PortsGXDIN
Input
Ports
1 0 192.168.3.10 00:00:00:00:00:00 1 - 4–
1 - 4Address
ABC
003
2 0 192.168.3.11 00:00:00:00:00:00 5 - 8–5 - 8
004
3 0...")
![Page 41
41
[CONTROLLERS]
ID Area Priority Boot File Model IPA EA Port
10 3–WV-CU950 172.18.0.200 00:80:45:AB:CD:EF–
Note:Actual MAC address that is indicated on a product should be entered to EA field.
[MONITORS]
ID Area Local Switch Ports
101 GX 1
202 GX 2
303 GX 3
404 GX 4
[OPERATORS]
ID Password Priority Timeout Name Class
100 100 100 00:00:00 Normal 1: Normal
955 955 3 00:00:00 Super 2: Super [CAMERAS]
IDControl
VideoCompensation Bitrate Model
OSD
1GX
GX 1
2
3
4
5
6
7Short Switch Port Switch Port
WV-CS954...](http://img.usermanuals.tech/thumb/58/68642/w64_wj-asc960_en_om_d-40.png "Page 41
41
[CONTROLLERS]
ID Area Priority Boot File Model IPA EA Port
10 3–WV-CU950 172.18.0.200 00:80:45:AB:CD:EF–
Note:Actual MAC address that is indicated on a product should be entered to EA field.
[MONITORS]
ID Area Local Switch Ports
101 GX 1
202 GX 2
303 GX 3
404 GX 4
[OPERATORS]
ID Password Priority Timeout Name Class
100 100 100 00:00:00 Normal 1: Normal
955 955 3 00:00:00 Super 2: Super [CAMERAS]
IDControl
VideoCompensation Bitrate Model
OSD
1GX
GX 1
2
3
4
5
6
7Short Switch Port Switch Port
WV-CS954...")
![Page 42
42
[DIGITAL RECORDER]
Admin Console sample Global database (#=multi.gdm) work sheet for Unit 1
[Units]
Unit ID Main IPA [A] Backup IPA [B] Unit Name Size
1 172.16.192.1–Domain 1 Enhanced
2 172.16.192.2–Domain 2 Enhanced
[System User]
User ID Password Priority Timeout Name Class
500 500 2 00:00:00 Global Operator 20: Global Level 0
501 501 2 00:00:00 Global Operator 20: Global Level 0 IDLogical
Model
11
WJ-HD316A
Video
SwitchIPA Cam
PortChannels
GX 81
172.18.0.60
6.144 Digital
Bitrate
1 Unit
Address
1
2...](http://img.usermanuals.tech/thumb/58/68642/w64_wj-asc960_en_om_d-41.png "Page 42
42
[DIGITAL RECORDER]
Admin Console sample Global database (#=multi.gdm) work sheet for Unit 1
[Units]
Unit ID Main IPA [A] Backup IPA [B] Unit Name Size
1 172.16.192.1–Domain 1 Enhanced
2 172.16.192.2–Domain 2 Enhanced
[System User]
User ID Password Priority Timeout Name Class
500 500 2 00:00:00 Global Operator 20: Global Level 0
501 501 2 00:00:00 Global Operator 20: Global Level 0 IDLogical
Model
11
WJ-HD316A
Video
SwitchIPA Cam
PortChannels
GX 81
172.18.0.60
6.144 Digital
Bitrate
1 Unit
Address
1
2...")
![Page 43
43
sys.ini configuration for Unit1 (01A=sys.ini)
[INTERFACES]
***{ Number of interfaces in the system }
Numinterfaces=3
***{ Interface Definitions }
***{ Interface=,, }
***{ !! Note: The InterfaceX IPAs must match the MainX CPU }
***{ hardware settings in order for the System to }
***{ operate correctly!!
***{ MainA CPU }
Interface0=192.168.200.200,255.255.255.0,192.168.200.200
Interface1=172.18.0.1,255.255.0.0,172.18.0.1
Interface2=172.16.192.1,255.255.0.0,172.16.192.1
***{ MainB CPU...](http://img.usermanuals.tech/thumb/58/68642/w64_wj-asc960_en_om_d-42.png "Page 43
43
sys.ini configuration for Unit1 (01A=sys.ini)
[INTERFACES]
***{ Number of interfaces in the system }
Numinterfaces=3
***{ Interface Definitions }
***{ Interface=,, }
***{ !! Note: The InterfaceX IPAs must match the MainX CPU }
***{ hardware settings in order for the System to }
***{ operate correctly!!
***{ MainA CPU }
Interface0=192.168.200.200,255.255.255.0,192.168.200.200
Interface1=172.18.0.1,255.255.0.0,172.18.0.1
Interface2=172.16.192.1,255.255.0.0,172.16.192.1
***{ MainB CPU...")
![Page 45
45
***{ Enable/Disable Serial Alarms by port }
***{ Note: Port 2 is dedicated to redundant communication }
***{ if REDUNDANT:YES is selected by front panel }
***{ switch. }
***{ Format: AlarmPort=, }
***{ port # = use 1 to indicate desired port (only one) }
***{ port # = use 0 to indicate ports not desired }
*AlarmPort=1,0
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{...](http://img.usermanuals.tech/thumb/58/68642/w64_wj-asc960_en_om_d-44.png "Page 45
45
***{ Enable/Disable Serial Alarms by port }
***{ Note: Port 2 is dedicated to redundant communication }
***{ if REDUNDANT:YES is selected by front panel }
***{ switch. }
***{ Format: AlarmPort=, }
***{ port # = use 1 to indicate desired port (only one) }
***{ port # = use 0 to indicate ports not desired }
*AlarmPort=1,0
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{...")
41 [CONTROLLERS] ID Area Priority Boot File Model IPA EA Port 10 3–WV-CU950 172.18.0.200 00:80:45:AB:CD:EF– Note:Actual MAC address that is indicated on a product should be entered to EA field. [MONITORS] ID Area Local Switch Ports 101 GX 1 202 GX 2 303 GX 3 404 GX 4 [OPERATORS] ID Password Priority Timeout Name Class 100 100 100 00:00:00 Normal 1: Normal 955 955 3 00:00:00 Super 2: Super [CAMERAS] IDControl VideoCompensation Bitrate Model OSD 1GX GX 1 2 3 4 5 6 7Short Switch Port Switch Port WV-CS954 WV-CS954 WV-CS954 WV-CS954 WV-CS954 WV-CS954 WV-CS9546.144MXCONT/MXOSD – 2 GX GX Short6.144 – 3 GX GX Short6.144 – 4 5Logical # 1 2 3 4 GX GX ShortTitle C 1 C 2 C 3 C 4 C 5 C 6 C 7 6.144 – 5 GX GX Short6.144 – 6 6 GX GX Short6.144 – 7 7 GX GX Short6.144 – 1 2 3 4 5 6 7
42 [DIGITAL RECORDER] Admin Console sample Global database (#=multi.gdm) work sheet for Unit 1 [Units] Unit ID Main IPA [A] Backup IPA [B] Unit Name Size 1 172.16.192.1–Domain 1 Enhanced 2 172.16.192.2–Domain 2 Enhanced [System User] User ID Password Priority Timeout Name Class 500 500 2 00:00:00 Global Operator 20: Global Level 0 501 501 2 00:00:00 Global Operator 20: Global Level 0 IDLogical Model 11 WJ-HD316A Video SwitchIPA Cam PortChannels GX 81 172.18.0.60 6.144 Digital Bitrate 1 Unit Address 1 2 2 33 4 4 5 5 6 6 7 7 – – – – – – – – – – – – – – – – – –
43
sys.ini configuration for Unit1 (01A=sys.ini)
[INTERFACES]
***{ Number of interfaces in the system }
Numinterfaces=3
***{ Interface Definitions }
***{ Interface=,, }
***{ !! Note: The InterfaceX IPAs must match the MainX CPU }
***{ hardware settings in order for the System to }
***{ operate correctly!!
***{ MainA CPU }
Interface0=192.168.200.200,255.255.255.0,192.168.200.200
Interface1=172.18.0.1,255.255.0.0,172.18.0.1
Interface2=172.16.192.1,255.255.0.0,172.16.192.1
***{ MainB CPU }
*Interface0=192.168.200.201,255,255,255,0,192.168.200.201
*Interface1=172.18.0.2,255.255.0.0,172.18.0.2
*Interface2=172.16.192.2,255.255.0.0,172.16.192.2
[FRAMES]
***{ MX Frame definition from Admin file }
***{ MXSW has format ,, }
***{ All others use , }
***{ All 0s used for digital-only systems. }
MXSWFunction=0,0,0
MXCONTFunction=0,0
MXOSDFunction=0,0
MXDIOFunction=0,0
MXRMSFunction=0,0
[PROCS]
***{ Process Interface Assignments }
***{ Format: = }
***{ Set these three to the interface_num of the Ethernet keyboards: }
Keybp=1
Mxconts=1
Mxpfw=1
***{ Set Swcpu to the interface_num of the MainCPU: }
Swcpu=1
***{ Set UnitManager to the same interface_num for all system CPUs: }
UnitManager=2
***{ Set CSntp to the interface_num for EXTERNAL SNTP operation: }
CSntp=2
***{ Set SSntp to the same interface_num for all system CPUs: }
SSntp=2
***{ Set SNMPAgent to the same interface_num for all system CPUs: }
SNMPAgent=2
[OSD]
***{ Initial OSD display position }
***{ Alarm text is placed on the General Status line. }
***{ Format: =, }
TimeDatePosition=1,1
CamTitlePosition=1,16
44
MonStatusPosition=1,15
GenStatusPosition=1,14
***{ Time-Date, Camera Title and Camera ID Controls }
***{ Code 2 takes effect only if source is MXOSD }
***{ Format: = }
***{ control code 0 - OFF }
***{ control code 1 - ON }
***{ control code 2 - By Operator }
TimeDateControl=2
CamTitleControl=2
CamIDControl=2
***{ Time and Date display format }
***{ Format: TimeDateFormat= }
***{ format 0 - DD/MM/YYYY }
***{ format 1 - MM/DD/YYYY }
***{ format 2 - DD/Mmm/YYYY }
***{ format 3 - YYYY/MM/DD }
***{ format 4 - Mmm/DD/YYYY }
***{ format 5 - DD/MM/YY }
***{ format 6 - MM/DD/YY }
***{ format 7 - DD/Mmm/YY }
***{ format 8 - YY/MM/DD }
***{ format 9 - Mmm/DD/YY }
TimeDateFormat=1
***{ Time-Hour Display format }
***{ Format: TimeHourFormat= }
***{ format 0 - 12 Hour }
***{ format 1 - 24 Hour }
TimeHourFormat=0
[UNIT]
***{ The unit ID should be the same as the one defined in }
***{ the Global Admin database for this unit }
***{ For single-unit systems, use ID=1. (ID=0 is invalid) }
ID=1
[LOG]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Log generation/save characteristics }
***{ Format: =, }
***{ Minutes = Frequency to copy to HD (1 - 30 min) }
***{ Note: Values outside this range = 1 min. }
***{ Days = days to save on HD (5 - 30) }
***{ Mode = 0 - off (default) }
***{ 1 - on }
UserLog=10,7,1
SwLog=10,7,0
AlarmLog=10,7,1
VideoLossLog=10,7,1
[RS232ALARM]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
45
***{ Enable/Disable Serial Alarms by port }
***{ Note: Port 2 is dedicated to redundant communication }
***{ if REDUNDANT:YES is selected by front panel }
***{ switch. }
***{ Format: AlarmPort=, }
***{ port # = use 1 to indicate desired port (only one) }
***{ port # = use 0 to indicate ports not desired }
*AlarmPort=1,0
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Alarm Text Display format }
***{ Format: AlarmTextDisplay= }
***{ option 0 - Display Alarm Text only }
***{ option 1 - Display both Alarm Text (20 chars) }
***{ and Action Text (20 chars) }
*AlarmTextDisplay=0
[SYSTEM]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Format: Keyboards= }
***{ Cameras= }
***{ Monitors= }
*Keyboards=64
*Cameras=1024
*Monitors=256
[ROUTING]
***{ This section is optional to the system. It is only required for external gateway. }
***{ Only one default gateway entry is allowed! }
***{ Format: default= }
default=192.168.200.1
*** Network entries must be grouped together although any number of entries is allowed. }
*** Format: network=,, }
*network=64.0.0.0,192.168.200.44,255.0.0.0
*network=88.0.0.0,192.168.200.88,255.0.0.0
*network=33.5.0.0,192.168.200.66,255.0.0.0
*network=64.0.0.0,192.168.200.55,255.0.0.0
*** Host entries must be grouped together although any number of entries is allowed. }
*** Format: host=, }
*host=33.44.55.66,192.168.200.66
*host=11.22.33.44,192.168.200.44
[SNTP]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ This section lists user-defined client SNTP values, }
***{ sync rates and an external server address. }
***{ }
***{ Format: (VALUES INTERNAL TO THIS UNIT) }
***{ ClientMode= (act as an SNTP client) }
46
***{ modes: 0 - Internal (default) }
***{ 1 - Unicast }
***{ 2 - Anycast }
***{ 3 - Broadcast }
***{ ServerMode= (to expose its timestamp to }
***{ other units) }
***{ modes: 0 - Off }
***{ 1 - On (default) }
***{ InternalFrequency= }
***{ -default is 600 sec (10 min) }
***{ }
***{ (VALUES FOR EXTERNAL CONNECTION) }
***{ NTPServerIPA= of SNTP server }
***{ -for Unicast mode only; optional for }
***{ modes 0,2,3. }
***{ ExternalFrequency= }
***{ -default is 18000 sec (5 hrs) }
***{ TZOffset= time zone offset from GMT }
***{ (+,-12 in integer values) }
***{ DaylightSaving= (applies for the local }
***{ time zone) }
***{ on/off: 0 - off }
***{ 1 - on }
*ClientMode=1
*ServerMode=1
*InternalFrequency=600
*NTPServerIPA=192.168.200.XXX
*ExternalFrequency=18000
*TZOffset=5
*DaylightSaving=1
[ERRORP]
ErrorLevel=3
sys.ini configuration for Unit2 (02A=sys.ini)
[INTERFACES]
***{ Number of interfaces in the system }
Numinterfaces=3
***{ Interface Definitions }
***{ Interface=,, }
***{ !! Note: The InterfaceX IPAs must match the MainX CPU }
***{ hardware settings in order for the System to }
***{ operate correctly!!
***{ MainA CPU }
Interface0=192.168.201.200,255.255.255.0,192.168.201.200
Interface1=172.18.0.1,255.255.0.0,172.18.0.1
Interface2=172.16.192.2,255.255.0.0,172.16.192.2
***{ MainB CPU }
*Interface0=192.168.200.201,255,255,255,0,192.168.200.201
*Interface1=172.18.0.2,255.255.0.0,172.18.0.2
*Interface2=172.16.192.2,255.255.0.0,172.16.192.2
[FRAMES]
***{ MX Frame definition from Admin file }
47
***{ MXSW has format ,, }
***{ All others use , }
***{ All 0s used for digital-only systems. }
MXSWFunction=0,0,0
MXCONTFunction=0,0
MXOSDFunction=0,0
MXDIOFunction=0,0
MXRMSFunction=0,0
[PROCS]
***{ Process Interface Assignments }
***{ Format: = }
***{ Set these three to the interface_num of the Ethernet keyboards: }
Keybp=1
Mxconts=1
Mxpfw=1
***{ Set Swcpu to the interface_num of the MainCPU: }
Swcpu=1
***{ Set UnitManager to the same interface_num for all system CPUs: }
UnitManager=2
***{ Set CSntp to the interface_num for EXTERNAL SNTP operation: }
CSntp=2
***{ Set SSntp to the same interface_num for all system CPUs: }
SSntp=2
***{ Set SNMPAgent to the same interface_num for all system CPUs: }
SNMPAgent=2
[OSD]
***{ Initial OSD display position }
***{ Alarm text is placed on the General Status line. }
***{ Format: =, }
TimeDatePosition=1,1
CamTitlePosition=1,16
MonStatusPosition=1,15
GenStatusPosition=1,14
***{ Time-Date, Camera Title and Camera ID Controls }
***{ Code 2 takes effect only if source is MXOSD }
***{ Format: = }
***{ control code 0 - OFF }
***{ control code 1 - ON }
***{ control code 2 - By Operator }
TimeDateControl=2
CamTitleControl=2
CamIDControl=2
***{ Time and Date display format }
***{ Format: TimeDateFormat= }
***{ format 0 - DD/MM/YYYY }
***{ format 1 - MM/DD/YYYY }
***{ format 2 - DD/Mmm/YYYY }
***{ format 3 - YYYY/MM/DD }
***{ format 4 - Mmm/DD/YYYY }
***{ format 5 - DD/MM/YY }
***{ format 6 - MM/DD/YY }
***{ format 7 - DD/Mmm/YY }
***{ format 8 - YY/MM/DD }
48
***{ format 9 - Mmm/DD/YY }
TimeDateFormat=1
***{ Time-Hour Display format }
***{ Format: TimeHourFormat= }
***{ format 0 - 12 Hour }
***{ format 1 - 24 Hour }
TimeHourFormat=0
[UNIT]
***{ The unit ID should be the same as the one defined in }
***{ the Global Admin database for this unit. }
***{ For single-unit systems, use ID=1. (ID=0 is invalid) }
ID=2
[LOG]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Log generation/save characteristics }
***{ Format: =, }
***{ Minutes = Frequency to copy to HD (1 - 30 min) }
***{ Note: Values outside this range = 1 min. }
***{ Days = days to save on HD (5 - 30) }
***{ Mode = 0 - off (default) }
***{ 1 - on }
UserLog=10,7,1
SwLog=10,7,0
AlarmLog=10,7,1
VideoLossLog=10,7,1
[RS232ALARM]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Enable/Disable Serial Alarms by port }
***{ Note: Port 2 is dedicated to redundant communication }
***{ if REDUNDANT:YES is selected by front panel }
***{ switch. }
***{ Format: AlarmPort=, }
***{ port # = use 1 to indicate desired port (only one) }
***{ port # = use 0 to indicate ports not desired }
*AlarmPort=1,0
[ALARMTEXTDISPLAY]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Alarm Text Display format }
***{ Format: AlarmTextDisplay= }
***{ option 0 - Display Alarm Text only }
***{ option 1 - Display both Alarm Text (20 chars) }
***{ and Action Text (20 chars) }
*AlarmTextDisplay=0
[SYSTEM]
***{ This section is optional. It is not required unless }
49
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ Format: Keyboards= }
***{ Cameras= }
***{ Monitors= }
*Keyboards=64
*Cameras=1024
*Monitors=256
[ROUTING]
***{ This section is optional to the system. It is only required for external gateway. }
***{ Only one default gateway entry is allowed! }
***{ Format: default= }
default=192.168.201.1
*** Network entries must be grouped together although any number of entries is allowed. }
*** Format: network=,, }
*network=64.0.0.0,192.168.200.44,255.0.0.0
*network=88.0.0.0,192.168.200.88,255.0.0.0
*network=33.5.0.0,192.168.200.66,255.0.0.0
*network=64.0.0.0,192.168.200.55,255.0.0.0
*** Host entries must be grouped together although any number of entries is allowed. }
*** Format: host=, }
*host=33.44.55.66,192.168.200.66
*host=11.22.33.44,192.168.200.44
[SNTP]
***{ This section is optional. It is not required unless }
***{ System defaults are not acceptable. Delete the }
***{ single asterisks below to make this section active. }
***{ This section lists user-defined client SNTP values, }
***{ sync rates and an external server address. }
***{ }
***{ Format: (VALUES INTERNAL TO THIS UNIT) }
***{ ClientMode= (act as an SNTP client) }
***{ modes: 0 - Internal (default) }
***{ 1 - Unicast }
***{ 2 - Anycast }
***{ 3 - Broadcast }
***{ ServerMode= (to expose its timestamp to }
***{ other units) }
***{ modes: 0 - Off }
***{ 1 - On (default) }
***{ InternalFrequency= }
***{ -default is 600 sec (10 min) }
***{ }
***{ (VALUES FOR EXTERNAL CONNECTION) }
***{ NTPServerIPA= of SNTP server }
***{ -for Unicast mode only; optional for }
***{ modes 0,2,3. }
***{ ExternalFrequency= }
***{ -default is 18000 sec (5 hrs) }
***{ TZOffset= time zone offset from GMT }
***{ (+,-12 in integer values) }
***{ DaylightSaving= (applies for the local }
***{ time zone) }
***{ on/off: 0 - off }
50
***{ 1 - on }
*ClientMode=1
*ServerMode=1
*InternalFrequency=600
*NTPServerIPA=192.168.200.XXX
*ExternalFrequency=18000
*TZOffset=5
*DaylightSaving=1
[ERRORP]
ErrorLevel=3