Panasonic Upgrade Software Wj Asc960 Operating Instructions
Here you can view all the pages of manual Panasonic Upgrade Software Wj Asc960 Operating Instructions. The Panasonic manuals for Software are available online for free. You can easily download all the documents as PDF.
Page 21
21 Define a Video Switch Node GX Switch Node A GX switch node consists of one or more video decoder devices (WJ-GXD900) and video encoder devices (WJ- GXE900). A GX switch node can be in a single system domain or across multiple system domains. Currently, the system only supports one GX switch node, and the node ID is always set to zero by the system software. GX Switch Node and its Domain For each GX switch node, there can be many encoder and decoder devices. In the case of a single domain system,...
Page 22
ID 22 ID SX850 Switch Node and its Domain For each SX850 switch node, there can be many matrix switch, matrix controller, and matrix OSD devices. In case of a single domain system, such as the system on page 11, all the matrix controller devices will be assigned to that domain. In case of a multiple domain system, the system designer has to decide which domain the matrix controller devices should belong to. Enter SX850 FRAMES in the WJ-ASC960 Admin Console After deciding the domain ID for each SX850...
Page 23
23 How to Identify a Video Switch Link Links between an SX650/SX850 Node and a GX Node In order to pass video from one switch node to another, video links are required. Page 11 gave an example of a sys- tem with video links. In general, you can find video links in the following conditions: •From a video decoder device to an SX650/SX850 matrix switch input •From an SX650/SX850 matrix switch output to a video encoder device The above video links can connect two video switch nodes within the same system...
Page 24
24 The global operator is subject to unit partitioning restrictions, where within their domain, she/he will act like a local super user. Enter Global Operators in the WJ-ASC960 Admin Console (Global Database) In the WJ-ASC960 Admin Console main screen, select Operators→Recordson the Componentsmenu. The OPERATORSscreen will be activated. Then, enter the operator(s)information into the fields provided. For global operator(s), you can select one of the four global class levels. User ID Password Priority...
Page 25
25 Upgrade MPU955A CPU to ASC960 To upgrade a standalone WJ-MPU955A system to a distributed WJ-ASC960 system, please refer to MPEG2 Encoder WJ-GXE900, MPEG2 Decoder WJ-GXD900 Operating Instructions. With this upgrade, you can create a multiple domain system that forms a large scale system.
Page 26
26 Main Features System Operator Functions Operator Log On and Off Each system operator is assigned a user ID and password by a global system administrator. A user ID and pass- word are required for any operators to log on to the system. System administrators can decide to automatically log operators off if there is no activity for a pre-defined time period. Operator Priority The global administrator can assign a priority to each operator. When two operators compete for system resources, only the...
Page 27
27 Global Video Camera Control and Operation Global Camera Seize Operators must seize a camera in order to perform camera operations. After Global Video Switch and Video Routing (refer to page 26), you can seize a camera 200001, which means a camera in domain 2 with a camera ID of 1. Camera Control The system provides operators with camera control functions. The supported functions are: pan, tilt, zoom, focus, and iris. Camera Operation The system provides operators with the following camera...
Page 28
28 •Recorder setup menu •Disk selection menu •A – B repeat playback menu •Filter cancellation menu Recorder Instant Playback Operation The system provides operators with the instant playback operation for a seized global camera. Global Tour Sequences Local Monitor Seize The system allows global operators to start and control a tour sequence from another system domain. Before tour sequence operation, a local monitor must be seized. Here is the sample procedure to seize local monitor number 1 in domain...
Page 29
29 Alarm Export to other Domains Alarm Export Function This function allows administrators to assign an alarm export to another system domain. Assign Alarm Export in WJ-ASC960 Admin Console In the WJ-ASC960 Admin main screen, select Components→Alarms→Records→Exporttab.From there, you can add, delete, and edit an alarm to be exported to multiple system domains (units). The alarm ID has the following for- mat: Domain (Unit) id (2) + Alarm id (1). E.g. 20001 In the above format, the domain ID has up to...
Page 30
30 Check the video link direction in the “Routing Configuration” screen of the global admin. Video links on the decoder side should be the source node and matrix side should be the destination side. Video Switch Node-Related problems No video switch between monitors in analog node and cameras in digital node P. 23 SymptomReference page Possible cause / Possible solution Check whether the global operator subjects to the tour sequence unit partitioning. Check whether you enter a correct unit id for the...