Panasonic Tv Dvd Vcr Combination Pv Dm2093 Operating Instructions

3131
Timer Operation
Repeat steps 1 and 2 on page 30.
1
Press PROG twice to exit this mode.
2
3
To Clear program...
4
Press     to select 
the desired program.
  
1) Press SET to 
display.
2) Press 
    to select 
and press SET 
or 
 
  
 to set new 
program contents.
3) Press PROG.
  Cancel a Timer Recording: 
(Recording is in progress)
 
Hold down STOP for a few 
seconds to cancel the Timer 
Recording.
 Any future daily or weekly recordings will 
be performed as programmed.
Press ADD/DLT.
 
Review,...

32For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Search System is ...Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are 
made, program index and information are also included. These index marks can be used to access or 
scan recordings.
1
Press SEARCH* 
in Playback or 
Stop mode to 
display INDEX...

3333
Advanced Operation
*Important: If a remote control button does not work when pressed, press the TV/VCR button on the 
remote and try the button again.
  Repeat Play
Set to see a recording over and over.
PLAY REPEAT  ON
To turn “ON,”press PLAY/REPEAT on the unit  repeatedly 
in Playback mode to select “REPEAT ON.”
To turn “OFF,”repeat above to select “REPEAT OFF.”
  Playback repeats when tape end is reached or 
an unrecorded portion longer than 30 seconds is 
detected.
  For repeat play in DVD...

34For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tape Operation (continued)
  Zero Search
To quickly return to a speci c tape counter 
location. 
1
2
Press STOP.
4
5 3
Continue playback, rewind, or fast 
forward.
Press COUNTER 
RESET at the 
desired position to 
reset to “0:00:00.”
Press DISPLAY* during playback to 
display the Counter.
Press...

3535
Advanced Operation
Press CM/ZERO repeatedly to select skip time in 
Playback mode.
  Commercial Skip
By pressing the CM/ZERO button in Playback mode you 
can skip over 1 to 3 minutes of recorded tape in just a few 
seconds.
  No indication appears.
■  Auto Shut Off 
No broadcast signal in TV mode (Only when Weak Signal 
Display is set to OFF.), DVD stops, or blank tape is played 
for 5 minutes. 
➞ Power turns off   This feature is canceled if any button is pressed during above 
conditions.
■  Auto...

36For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
When “ON” is selected, the picture is displayed 
even when a broadcast signal is weak or 
non-existent.
  Weak Signal Display Feature
1
2
3
  “ON”  =  Picture is displayed regardless of signal 
condition, and may not always be clearly 
visible.
  “OFF” =  Screen turns solid blue when signal is absent...

3737
Advanced Operation
  VCR Lock
All operations are prohibited except Timer 
recording and tape eject. Useful for families with 
small children.
In Stop mode, hold 
down REC on 
the unit without a 
cassette inserted for 7 
seconds to turn “ON.” 
(Please ignore “NO 
CASSETTE” warning.)
Repeat above with or 
without cassette to turn 
“OFF.”
  VCR Lock is canceled automatically after about 24 
hours if clock is set.
REC
*Important: If a remote control button does not work when pressed, press the TV/VCR...

38For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Press ACTION* to display MAIN MENU.
 
Enter Secret Code
A 4-digit code must be entered to view a blocked 
program or change rating settings.
1
  Some rental movies do not include V-Chip 
data.
  DO NOT forget your secret code.
  Once ratings are set, restricted tapes or 
programs cannot be accessed...

3939
Advanced Operation
1
1) Press  to select 
US MOVIES.
2) Press SET to set 
“ON” or “OFF.”
If LOCK menu is not displayed, perform “Enter 
Secret Code” steps on page 38.
■ “ON” 
➞ V-Chip Control is activated.
■ “OFF” ➞ V-Chip Control is deactivated.
 
US MOVIES RatingsUS MOVIES RATINGS
*Important: If a remote control button does not work when pressed, press the TV/VCR button on the 
remote and try the button again.
2
1) Press  to 
select CHANGE 
SETTINGS.
2) Press SET to 
display screen.
3
1) Press  to...

40For assistance, please call : 1-800-211-PANA(7262) or send e-mail to :\
 [email protected] assistance, please call : 1-800-211-PANA(7262) or send e-mail to :\
 [email protected]
US TV PROGRAMS RATINGS: Chart 1
US TV PROGRAMS RATINGS: Chart 2
1
1) Press   * to 
select US TV 
PROGRAMS.
2) Press SET  to set 
“ON” or “OFF.”
 US TV PROGRAMS Ratings
If LOCK menu is not displayed, do “Enter 
Secret Code” steps on page 38.
US   MOV I ES                       : OFF
       CHANGE...