Panasonic Tv Dvd Vcr Combination Pv Dm2093 Operating Instructions

1111
Initial Setup  Rear View of the unit
 
AC Power Plug
When plugged into an AC 
outlet, this unit consumes 3.5 W of 
electric power in OFF condition. 
  VHF/UHF Antenna 
Input Terminal
See below.
  Audio Output 
Connector (L/R)
Pg. 12
  Optical digital audio 
output connector
Pg. 12
Connections
For ANT./Cable
Connect the cable from 
Antenna/Cable to the VHF/UHF 
terminal on the unit.
For DSS/Cable Box
Connect the OUT jack on your 
cable box to the VHF/UHF terminal 
on the unit with a RF cable.
IN...

12For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
DIGITAL AUDIO OUT
PCM/BITSTREAM
OPTICAL COXIAL
OPTICAL
Audio connections
Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on 
DVDs by connecting an ampli er and speakers. There are two types of connection, digital and analog.
Connect an ampli er with Dolby Digital and 
DTS decoders to enjoy surround sound.
You can also enjoy stereo sound with sampling...

1313
Initial Setup
Manufactured under license from Dolby 
Laboratories. “Dolby” and the double-D 
symbol are trade marks of Dolby 
Laboratories.
Manufactured under license from 
Digital Theater Systems, Inc. US Pat. 
No. 5,451,942, 5,956,674, 5,974,380, 
5,978,762 and other world-wide patents 
issued and pending. “DTS” is a registered 
trademark of Digital Theater Systems, 
Inc. Copyright 1996, 2000 Digital Theater 
Systems, Inc. All rights reserved.
IMPORTANT NOTE:Caution for optical digital audio...

14For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Initial Setup (Ready to Play)
             PROCEEDING
         AUTO CLOCK SET 
CANCEL : PRESS STOP KEY
 2 /  6 / 2003   THU 12 : 00PMDST : ON
A
UTO  CLOCK   SET
CO
MPLETED
SETT I NG : CH 1 0
PLEASE SET  CLOCK BY
PRESS I NG ACT I ON KEY A
UTO  CLOCK   SET
 I S   I NCO
MPLETE
Plug the unit power cord into an AC wall outlet.
1
3 2
  If you use a cable box, turn it on and set it to the Public...

1515
Initial Setup
Note to CABLE system installer:
This re mind er is pro vid ed to call the CABLE (Cable TV) System Installers at ten tion to Article 820-40 
of the NEC that pro vides guide lines for proper grounding and, in par tic u lar, speci es that the cable 
ground shall be con nect ed to the ground ing system of the build ing, as close to the point of cable entry 
as practical.
                                   
  
  
 
        
        
THU
SET          :  SET    SELECT  :                 
END...

16For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Reset Language, Channels, Clock,     
3)Press   
 to select 
“MANUAL,” then 
press SET.
(For Auto Clock Set, 
select “AUTO CLOCK 
SET,” and press SET.)
3) Press   
 to select 
“ANTENNA,” then 
press SET to set 
your antenna system 
(“TV” or “CABLE”).
4) Press 
  
 to select 
“AUTO SET,” then 
press SET.
  After Channel Auto Set 
is  nished, Clock Auto 
Set will be performed.
(If clock is set...

1717
Initial Setup
     Time Zone Adjust
AUTO  CLOCK  SETMANUALT I ME  ZONE  ADJUST   : 0
SELECT :          SET       :            
END       : ACT I ON      
             SET  CLOCK  
AUTO  CLOCK  SETMANUALT I ME  ZONE  ADJUST   : +1
SELECT :          SET       :            
END       : ACT I ON      
             SET  CLOCK  
M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
531
4)Press   
 and 
press SET to 
select and set the 
month,...

18For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Record On a Tape Playback a Tape
1
Insert a cassette.  The unit power comes 
on automatically.
To prevent tape jam,
Record tab
remove loose or peeling 
labels from tapes.
Operation using unit buttons
REC Indicator Insert a tape.
Press PLAY* to play a tape.
2
■  Forward/ Reverse scene search
 ➞Press FF/SLOW+ or REW/SLOW-.
 ➞Press again or PLAY to release.
■  Still (Freeze) picture
 ➞Press...

1919
Basic Operation
e
Playback (Source) 
1
Recording (Editing) unit
Insert pre-recorded 
tape.Insert blank tape with 
record tab. 
  Dubbing tapes protected with 
Copy Guard will have poor 
quality results.
2
3
4
5
Press PLAY then press 
PAUSE at starting point 
to put in Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.Select “LINE” mode.
See “Selecting Input Mode” below.
 
Selecting Input Mode
  Unauthorized exchanging and/or copying 
of copyrighted recordings may be copyright...

20For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Press       
 or 
NUMBER key(s) 
(see below) to 
select title, and 
press SET or PLAY 
to start playing.
  “Pressing SET or 
PLAY” is not 
necessary when using 
NUMBER keys.
41
Insert a disc.  If a disc is already inserted, go to step 3. 
(Depending on the disc, playback may start 
automatically.)
1) Press OPEN/CLOSE.
2) Place disc into disc tray.
2
Press PLAY to start play. Disc tray 
closes...