Panasonic Tv Dvd Vcr Combination Pv Dm2092 Operating Instructions

21
Basic Operation
Please read the disc jacket for operation
information.
If a single sided disc is placed in upside
down, “PLEASE CHECK THE DISC,
AND FOR STAINS OR SCRATCHES ON
DISC” is displayed.
Remove disc and press unit POWER off
when not in use.
Disc continues to rotate with menu
displayed even after play is done. Press
STOP to clear menu display when finished
with menu.

Forward/Reverse rapid scene search
➛ ➛➛ ➛
➛Press FF/SLOW+ or REW/SLOW-
during play.
➛ ➛➛ ➛
➛Press PLAY to release.
Starting...

22For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
TV Operation
1
Press POWER*
on the remote or unit.

Using the 100 key
When selecting CABLE channels 100 to 125
with the number keys, first press the 100 key,
and then enter the remaining two digits.

Rapid Tune
Press R-TUNE to display the last channel you
were watching.

Audio Mute
Press MUTE to instantly mute the sound.
Press again to restore the previous sound level.

Phones
Connect an earphone (not...

23
TV Operation
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an “ 
 ” mark while the selected audio mode is indicated
with an arrow. To change the audio mode for these
broadcasts, see the “Select Audio Mode for TV Viewing”
section (below.)
Press DISPLAY to display
the broadcast signal being received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio...

24For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Closed Caption Mode Feature
1
Closed Caption System
Closed Caption is ...This multi-use system not only allows the hearing impaired to enjoy selected programs,
but also makes useful information from TV stations available to everyone.
Press ACTION*
to display MAIN MENU.
Closed Caption Mode Selections
Caption Mode: CAP C1 or C2
A narration of selected TV
programs is displayed.
Check TV program listings for...

25
TV Operation
1
Caption On Mute Feature
Closed Caption narration, if available, is displayed
when MUTE button is pressed for silence.
Press ACTION
to display MAIN MENU.
When a disc supporting closed caption
is used, the subtitle and the closed
caption may overlap. In this case, turn
the subtitle or caption on mute mode off.
(See page 48.)
2
1)Press   to
select “TV.”
2)Press SET to
display SET UP
TV screen.
6
Press ACTION three times
to return to the normal screen.
7
Press MUTE to mute the sound and...

26For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
1
ON-TIMER with Alarm
TV Timer  Features
Ready Checklist
The clock is set to the correct time.This unit can be set to automatically power on in one of
4 modes (TV, VCR Playback, FM radio, or DVD/Video
CD/CD.) You can also combine the On-Timer with a
one minute alarm that gradually increases in volume.
If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60...

27
TV Operation
On-Screen Display (OSD)
TV/VCR Status & Clock Display
Press DISPLAY
to display or remove the overlay.
Blue Screen Display
When a function button is pressed (PLAY, FF, etc.)
or you change channels, the unit mode or channel
number will be displayed. (Some station names
may also appear if Channel Caption is set. See
page 38.)
0 8ABC
Channel & Function Display
PLAY
Whenever a blank section of a tape comes up in
Play mode, or when the selected channel has no
broadcast signal with the Weak...

28For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
FM Radio
2
Press a number
key* (1~9) to
select the FM
preset number.
1
To Make Corrections,
select station with a
number key, then do
step 3 again.
To exit FM mode,
press 
 or DVD
on the remote or
TV/FM on the unit.
1)Press CH  to
select the desired
radio station.
(Each press
changes frequency
by 200 KHz.)
2)Press ADD/DLT
to set the radio
station.
Hold down CH  or for a few seconds,
then release to...

29
TV Operation
3
4

 

 


For cable TV users
➛ “INT”

 

 


For antenna users
➛ “EXT”
2
1
To exit FM mode,
press  or DVD on the remote
or TV/FM on the unit.
Press a number
key (1~9) to
select a preset
FM number
(see FM Radio
Setup on page 28).
Using FM Radio
FM  1     87.  5MHz
1 2 : 0 0PM
Press ACTION twice to end setup.
Press FM on the remote or press TV/FM
on the unitto display FM radio mode.
FM radio cannot be recorded on a
Video cassette.
You may get better reception by
repositioning the unit....

30For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Press PROG to end
the program.
To Enter More
Programs,
press 
 to select
and SET to set a blank
program number, and
then repeat step 3.
Press PROG twice to exit this mode.
If you’re using a cable box, make sure that it
is tuned to the desired channel and the power
is left on for timer recording.
PROG TIMER Indicator lights up on the unit.
Timer Recording
You can set up to 8 programs to be recorded...