Panasonic Tv Dvd Vcr Combination Pv Dm2092 Operating Instructions

11
Rear View of the unit
AC Power Plug
When plugged into an AC outlet,
this unit consumes 3.5 W of
electric power in OFF condition.
VHF/UHF Antenna
Input Terminal
See below.
Audio Output
Connector (L/R)
Pg. 12
Optical digital audio
output connector
Pg. 13
Initial Setup
Connections
For ANT./Cable
Connect the cable from
Antenna/Cable to the VHF/UHF
terminal on the unit.
For DSS/Cable Box
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with a RF
cable.
WARNING
Overtightening “Nut...

12For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Connections (continued)
Notes on audio output from the optical digital
audio output connector
Enjoying digital audio output from the
digital audio output connector
*1 The type of audio output from the connector can be
selected by the Settings for DVD Operation. (See page 59.)
*2 Sound having 96 kHz sampling is converted into 48 kHz
sampling when it is output from the unit’s optical digital
audio output...

13
Initial Setup
Unit
Optical digital audio
cable (optional)
Dolby Digital Decorder/
dts processing (optional)
Amplifier
Center speaker
Front
SpeakerFront
Speaker
Subwoofer
Surround
speakerSurround
speaker

Unit 
➛ ➛➛ ➛
➛ Dolby Digital Decoder 
➛ ➛➛ ➛
➛ Amplifier 
➛ ➛➛ ➛
➛ Speaker
or
Unit 
➛ ➛➛ ➛
➛ dts (digital theater systems) Decoder 
➛ ➛➛ ➛
➛ Amplifier 
➛ ➛➛ ➛
➛ Speaker
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts
bitstream is output from the unit Optical...

14For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Plug the unit power cord into an AC wall outlet.
Initial Setup (Ready to Play)
1
3
Press  on the remote for TV-VCR mode.
2
 If you use a cable box, turn it on and set it to the Public
Broadcasting Service (PBS) channel in your time zone.
If you use a DSS receiver, it must be turned off.
ACTIONTV-VCR
SELECT SET
POWER
Initial Setup (Ready to Play)
Please make all cable or antenna connections before...

15
Initial Setup
*Important:If a remote control button does not work when pressed, press the  button on the remote
and try the button again.
Manual Clock Set
If AUTO CLOCK SET was incomplete,
manually set the clock as follows.
Press ACTION on the Remote to
display SET CLOCK Menu screen.
1
Press  to select the month
and press SET to set. In the
same manner, select and set
the date, year, time, and DST.
(Daylight Saving Time)
2
                                   
  
  
 
        
        
Press ACTION...

16For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Reset Language, Channels, Clock,   Time Z
3)Press  to select
“MANUAL,” then
press SET.
(For Auto Clock Set,
select “AUTO CLOCK
SET,” and press SET.)
3) Press  to select
“ANTENNA,” then
press SET to set
your antenna system
 (“TV” or “CABLE”).
4) Press 
 to select
“AUTO SET,” then
press SET.
After Channel Auto Set
is finished, Clock Auto
Set will be performed.
(If clock is set manually,
Clock Auto Set will...

17
Initial Setup
4)Press  and
press SET to select
and set the month,
date, year, time, and
DST 
(Daylight Saving
Time)
.
To Make Corrections,
repeatedly press  to move to error, then
correct.
5)Press ACTION twice
to 
start the clock
and exit this mode.
3)Press 
 to select
“TIME ZONE
ADJUST” and
press 
 or  to
subtract or add
hour(s) as
necessary.
4)Press ACTION
twice to exit.
“TIME ZONE ADJUST”
returns to “0” if clock is
set manually.
(Only when Auto Clock is set.)
Add or Delete a Channel
Time Zone...

18For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Operation using unit buttons
REC Indicator Insert a tape.
Record On a Tape
Playback a Tape
1
Insert a tape.
Press PLAY* to play a tape.
2
The unit power comes
on automatically.
To prevent tape jam,remove loose or peeling
labels from tapes.

Forward/Reverse scene search
➛ ➛➛ ➛
➛Press FF/SLOW+ or REW/SLOW-.
➛ ➛➛ ➛
➛Press again or PLAY to release.

Still (Freeze) picture
➛ ➛➛ ➛
➛Press STILL/PAUSE.
➛ ➛➛ ➛...

19
Basic Operation
Copy Your Tapes  (Dubbing)
Unauthorized exchanging and/or
copying of copyrighted recordings
may be copyright infringement.
Please note that some tapes
cannot be dubbed on this unit.
Also, it is not possible to dub
DVD/Video CD/CD to VHS tape
using this unit.
Playback (Source)
1
Recording (Editing) unit
Insert pre-
recorded tape.Insert blank tape with
record tab.
Dubbing tapes protected
with Copy Guard will have
poor quality results.
2
3
4
5
Press PLAY, then
press PAUSE at
starting...

20For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
4
Press   or
number key(s) (see
below) to select title
and press SET to
play.
Basic DVD Operation
Ready Checklist
All connections are made. (See pages 11-13.)
Your unit is plugged in.
If unit is connected to an audio amplifier,
turn the stereo system’s power on.1
Press POWER* on the remote or unit.
Insert a disc.
If a disc is already inserted, go to step 3.
(Depending on the disc, playback may start...