Panasonic Tv Dvd Vcr Combination Pv Df2003 Operating Instructions
Here you can view all the pages of manual Panasonic Tv Dvd Vcr Combination Pv Df2003 Operating Instructions . The Panasonic manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 11
11 Initial SetupRear View of the unit Connections For ANT./Cable Connect the cable from Antenna/Cable to the VHF/UHF terminal on the unit. For DSS/Cable Box Connect the OUT jack on your cable box to the VHF/UHF terminal on the unit with a RF cable. Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.WARNING AC Power Plug When plugged into an AC outlet, this unit consumes 3.5 W of electric power in OFF condition. VHF/UHF Antenna Input Terminal See below....
Page 12
12For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] Audio connections Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an ampli er and speakers. There are two types of connection, digital and analog. Connections (con tin ued) Connect an ampli er to enjoy high-quality stereo sound with sampling frequencies of 96 kHz. ■ Analog connection Connect an ampli er with Dolby Digital and...
Page 13
13 Initial Setup Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” is a registered trademark of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade marks of Dolby Laboratories. IMPORTANT NOTE:Caution for optical digital audio output...
Page 14
14For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] Initial Setup (Ready to Play) 2 / 6 / 2003 THU 12 : 00PMDST : ON A UTO CLOCK SET CO MPLETED SETT I NG : CH 1 0 PLEASE SET CLOCK BY PRESS I NG ACT I ON KEY A UTO CLOCK SET I S I NCO MPLETE Plug the unit power cord into an AC wall outlet. 1 3 2 If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS receiver,...
Page 15
15 Initial Setup Note to CABLE system installer: This re mind er is pro vid ed to call the CABLE (Cable TV) System Installers at ten tion to Article 820-40 of the NEC that pro vides guide lines for proper grounding and, in par tic u lar, speci es that the cable ground shall be con nect ed to the ground ing system of the build ing, as close to the point of cable entry as practical. THU SET : SET SELECT : END...
Page 16
16For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] Reset Language, Channels, Clock, 3)Press to select “MANUAL,” then press SET. (For Auto Clock Set, select “AUTO CLOCK SET,” and press SET.) 3) Press to select “ANTENNA,” then press SET to set your antenna system (“TV” or “CABLE”). 4) Press to select “AUTO SET,” then press SET. After Channel Auto Set is nished, Clock Auto Set will be performed. (If clock is set manually, Clock...
Page 17
17 Initial Setup SURROUND Time Zone Adjust AUTO CLOCK SETMANUALT I ME ZONE ADJUST : 0 SELECT : SET : END : ACT I ON SET CLOCK AUTO CLOCK SETMANUALT I ME ZONE ADJUST : +1 SELECT : SET : END : ACT I ON SET CLOCK M A I N MENU DVDLOCK CH CLOCKTV LANGUAGE END : ACT I ON SELECT : SET : SET 531 4)Press and press SET to select and set the month,...
Page 18
18For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] SURROUND Record On a TapePlayback a Tape 1 Insert a cassette. The unit power comes on automatically. To prevent tape jam, Record tab remove loose or peeling labels from tapes. Operation using unit buttons Press PLAY* to play a tape. 2 ■ Forward/Reverse scene search➞ Press FF/SLOW+ or REW/SLOW-. ➞ Press again or PLAY to release. ■ Still (Freeze) picture➞ Press STILL/PAUSE. ➞ Press PLAY to release....
Page 19
19 Basic Operation R-AUDIO OUT-LVIDEO OUT S-VIDEO OUT L-AUDIO IN2-R VIDEO IN2 S-VIDEO IN2 R-AUDIO IN1-L VIDEO IN1 S-VIDEO IN1 Playback (Source) 1 Recording (Editing) unit Insert pre-recorded tape.Insert blank tape with record tab. Dubbing tapes protected with Copy Guard will have poor quality results. 2 3 4 5 Press PLAY then press PAUSE at starting point to put in Standby mode. Press PLAY to start dubbing. Press STOP to stop dubbing. Select “LINE” mode. See “Selecting Input Mode” below....
Page 20
20For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected] 1 Insert a disc. If a disc is already inserted, go to step 3. (Depending on the disc, playback may start automatically.) 1) Press OPEN/CLOSE. 2) Place disc into disc tray. 2 Hold disc by its edges only (page 7) with printed side up and use guides to place into tray. Use 1 3″(8 cm) or 2 5″ (12 cm) disc. *1Interactive DVD... May include multiple camera angles, stories, etc. * 2Video CD with...