Panasonic Tv Dvd Ram Vcr Combination Pv Dr2714 Operating Instructions

21
TV Operation
MTS Broadcast / TV Stereo System
The following are possible audio broadcast types and on-screen 
displays. The signal being received is indicated with a “  ” mark 
while the selected audio mode is indicated with an arrow. To 
change the audio mode for these broadcasts, see the “Audio Mode 
for TV Viewing” section.
1  Press DISPLAY to display the broadcast signal 
being received.
„ MTS Stereo broadcast:
Multi-channel Television Sound Stereo broadcast. Select 
STEREO audio mode.
• If stereo...

22
TV Timer Features
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
PROG / 
CHECKSLEEP
ON-TIMER
Indicator ADD/DLT
ON TIMER
10:00AM CH 05
CANCEL:ADD/DLT
SELECT: SET:SET
END :RETURN
This unit can be set to automatically power on in one of 3 modes 
(TV, VCR Playback, or Disc.)Notes:
•  If no button on the Remote Control or unit is pressed within 60 minutes 
after unit turns itself on, it will turn itself back off.
•  If an interactive...

23
TV Operation
Closed Caption System
Closed Caption is ...
This multi-use system not only allows the hearing impaired to 
enjoy selected programs, but also allows one to watch programs 
with the volume muted.
1  Press ACTION to display MAIN MENU.
8  Press RETURN three times to return to the normal 
screen.
2 Press 
x
z
{
y to select “TV.”
4 Press 
x
z to select “CAPTION”.
5  Press SET to display CAPTION screen.
6 Press 
x
z to select “CAPTION MODE.”
7  Press SET repeatedly to select mode.
Closed Caption...

24For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Closed Caption narration, if available, is displayed when MUTE 
button is pressed for silence.
1  Press ACTION to display MAIN MENU.
Note:•  When a disc supporting closed captions is used, the subtitle and the 
closed caption may overlap. In this case, turn the subtitle or caption mode 
off. (See page 55.)
2 Press 
x
z
{
y to select “TV.”
3  Press SET to display SET UP TV screen.
10...

25
TV Operation
Video / Audio Setting
1  Do steps 1 - 5 at left.
2 Press 
x
z to select “AUDIO MENU.”
3  Press SET to select desired mode.
4  Press RETURN three times to end setup.
Notes:•  The effects of this feature on the signal are not output to the Audio/Video 
Output Connector.
•  When AUDIO MENU mode is “AUTO,” the AUDIO ADJUST setting will be 
“STANDARD.”
•  AUDIO MENU settings remain in memory.
•  VIDEO MENU settings do not remain in memory.
6 Press 
x
z to select “VIDEO MENU.”
7  Press SET...

26For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
1  Press ACTION to display MAIN MENU.
2 Press 
x
z
{
y to select “TV.”
3  Press SET to display SET UP TV 
screen.
4 Press 
x
z to select “SET UP VIDEO/AUDIO.”
5  Press SET to display SET UP VIDEO/AUDIO screen.
6 Press 
x
z to select “VIDEO ADJUST.”
7  Press SET to display VIDEO ADJUST screen.
8 Press 
x
z to select an item.
9 Press 
{
y to adjust.
„ To Reset VIDEO Controls.
Press
x
z...

27
TV Operation
1  Press ACTION to display MAIN MENU.
2 Press 
x
z
{
y to select “TV.”
3  Press SET to display SET UP TV 
screen.
4 Press 
x
z to select “SET UP VIDEO/AUDIO.”
5  Press SET to display SET UP VIDEO/AUDIO screen.
DVD MPEG-DNR
SET UP TV
CAPTION
SET UP VIDEO/AUDIO
FRONT DISPLAY :OFF
DVD VOL ADJUST :+2
SELECT: SET:SET
END :RETURN
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :RETURN
6 Press 
x
z to select “DVD MPEG-DNR.”
7  Press SET to set “ON” or “OFF.”
8  Press RETURN three...

28
Before using the VCR
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
1  Insert a tape.•  The unit power comes on automatically.
To prevent tape jam,
remove loose or peeling labels from tapes.
Record tab DISPLAY STOP
PAUSE
AUDIO VCR REC
SPEED
Insert
a tapeCH
x
zREC STOP / 
EJECTVCR
CH
x
z
NUMBER
keys
Before using VCR Functions
1  Confirm that tape is inserted.
2 Press VCR.•  The indication “VHS” flashes in the Front Display.
3  Each...

29
VCR
Operation
Recording Television Programs
2 Press CH 
x
z or NUMBER keys to Select Channel.•  For “LINE” input, see page 20.
3  Press SPEED to select recording speed.•  Selected speed is displayed.
4  Press VCR REC to start recording.•  You cannot view another channel during recording.
„One Touch Recording (OTR)
Press VCR REC repeatedly to set the recording length 
(30 min - 4 hours.)
• The unit stops recording at a preset time.
1  Insert a tape with record tab.•  The unit power comes on...

30
Timer Recording
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
STOP
ADD/DLT
PROG / 
CHECK
5  Press RETURN to end the program. To Enter More 
Programs, press 
x
z to select and SET to set a 
blank program number, and then repeat step 4.
6  Press RETURN to exit this mode.•  If you’re using a cable box, make sure that it is tuned to the desired 
channel and the power is left on for timer recording.
1  Press PROG/CHECK to display SET...