Panasonic Tv Dvd Ram Vcr Combination Pv Dr2714 Operating Instructions

11
Getting Started„Front View (Sub Display)
No. Part Name Caption
1
VCR
Tape IndicatorLights when in VCR mode.
2 Tape SpeedDisplays tape recording speed.
3 Main display sectionDisplays current time, tape counter, 
and function.
4 DirectionDisplays tape direction.
5 Timer recording iconLights when a timer recording is set.
6 VCR InformationDisplays VCR information.
7
CommonChannelDisplays channel.
8 Dubbing InformationDisplays dubbing direction. (source/
target)
1
VCR DVD
3 245 10
71112 1469
13 15 16
8
„...

12For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Connections
„ Antenna  Connection
Connect the cable from Antenna to the VHF/UHF terminal on 
the unit.
„ Cable  Connection
Connect the cable supplied by your local cable company 
to VHF/UHF terminal on the unit. Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.
•  Turn off the power supply for all com ponents before making any connections.
•  If the...

13
Getting Started
!UDIO
/546IDEO
/54
2,
Connects VCRs and other peripheral equipment
„ AV Input terminal 1 is used (S-VIDEO)
Connecting the “1, 2” AV Input Terminals
Notes:•  Similar connections are available at the “1, 2” AV input terminals.
•  AV Input terminal 2 is located on the front of the unit.
„ AV Input terminal 1 is used (VIDEO)
!UDIO
/54
2,
M3 plug
Connecting the Headphones / Earphones Jack
(Not supplied) 

14For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and 
speakers. There are two types of connection, digital and analog.
Connect an AV amplifier with Dolby Digital or DTS 
decoders
„ Digital  connection
Connecting the Audio Output Terminal
Please see amplifier manual 
for speaker requirements. Speakers...

15
Getting Started
Connect an analog amplifier to enjoy high-quality stereo sound 
with sampling frequencies of 96 kHz.
„ Analog  connectionIMPORTANT NOTE:
Caution for optical digital audio output connector:
•  Be sure to refer to pages 67-69 regarding output settings of Dolby Digital, 
dts, and PCM.
•  CDs can be played as usual.
•  Audio from the Digital Audio Out terminal is only output during playback.
•  When connecting an amplifier which contains the Dolby Digital or dts 
decoder, be sure to select...

16
Tuning TV
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Please make all cable or antenna connections before powering on.
Plug the unit power cord into an AC wall outlet.
Settings are made automatically. When 
complete, this screen appears.If setup is incomplete, the following 
screen appears. Check connection of 
Antenna/Cable to the RF in Terminal, 
then try to manually set the clock as 
follows.
a.  Press ACTION on the Remote...

17
TV Operation
„ To add channel:
Select channel with NUMBER keys and press ADD/DLT.
„ To delete channel:
Select channel with CH 
x
z or NUMBER keys and press ADD/
DLT.
CHANNEL 08 ADDED
CHANNEL 08 DELETED
Add or Delete a Chan nel
4 Press 
x
z to select “AUTO CLOCK SET,” then 
press SET.
3  Press SET to display SET CLOCK screen.
2 Press 
x
z
{
y to select “CLOCK.”
1  Press ACTION to display MAIN MENU.
Automatic Clock Setting
SET CLOCK
AUTO CLOCK SET
MANUAL
SELECT: SET:SET
END :RETURN
MAIN MENU
DVD LOCK...

18For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
4 Press 
x
z to select “TIME ZONE ADJUST” and 
press SET to subtract or add hour(s) as necessary.
5  Press RETURN twice to exit.
(Only when Auto Clock is set.)
2 Press 
x
z
{
y to select “CLOCK.”
3  Press SET to display SET CLOCK screen.
Time Zone Adjust
2 Press 
x
z
{
y to select “LANGUAGE.”
3  Press SET repeatedly.
1  Press ACTION to display MAIN MENU.
4  Press RETURN to exit.
For...

19
TV Operation
When “ON” is selected, the picture is displayed even when a 
broadcast signal is weak or non-existent.
ON:
Picture is displayed regardless of signal condition, and may not 
always be clearly visible.
OFF:
Screen turns solid blue when signal is absent or weak.
1  Press ACTION to display MAIN MENU.
2 Press 
x
z
{
y to select “CH.”
3  Press SET to display SET UP 
CHANNEL screen.
6  Press RETURN twice to return to the normal screen.
4 Press 
x
z to select “WEAK SIGNAL DISPLAY.”
5  Press SET...

20
TV Operation
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
„ Method  1:
Press CH 
x
z. The display will change as follows.
„ Select desired channel:
Press CH 
x
z or NUMBER keys.
„ Adjust desired volume level:
Press VOL + or VOL -.
CH
x
z
100 key
Selecting Input Mode
Using the CH/VOL Button
VOL+/- RAPID
TUNEMUTE
„ Method  2:
Press INPUT. The display will change as follows.INPUT
AV Input Terminal 2
Notes:•  The diagram at right is...