Panasonic Tv Dvd Combination Pv 27df5 Operating Instructions

							Information
Getting Started
TV Operation
Disc Operation Information
LSQT0942 A
TV / DVD Combination
Operating Instructions
Model No. 
• Connection and Initial Setup Procedures are on pages 10 and 13.
PV-27DF5 
MULTI FORMAT PLAYBACK
*Ability to play back may depend on recording 
conditions.
As an ENERGY STAR® Partner, Panasonic Corporation of North America 
has determined that this product or product model meets the ENERGY STAR® guidelines for energy efficiency.
Please read these instructions carefully before attempting to connect, operate, 
or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.) 
						

							2For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
On your purchase of one of the most sophisticated and reliable 
products on the market today. Used properly, it will bring you and 
your family years of enjoyment. Please fill in the information below. 
The serial number is on the tag located on the back of your unit.
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for 
replacement parts.
Date of Purchase  _____________________
Dealer Purchased From ________________
Dealer Address _______________________
Dealer Phone No. _____________________
Model No.   __________________________
Serial No.  ___________________________
1 Remote Control 
(EUR7724010 or EUR7724010R)
2 Batteries “AA”
Congratulations  Accessories
To order accessories, call toll free 
1-800-332-5368.
Before Using
This television receiver provides display of television closed 
captioning.U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; 
5,315,448; and 6,516,132.
This product incorporates copyright protection technology that is 
protected by U.S. patents and other intellectual property rights. 
Use of this copyright protection technology must be authorized 
by Macrovision, and is intended for home and other limited 
viewing uses only unless otherwise authorized by Macrovision. 
Reverse engineering or disassembly is prohibited. 
						

							3
Getting Started
  Safety Precautions/Mesures de sécurité
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR 
MOIS TURE.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT IN WALL 
SOCKET. FULLY INSERT.
CAUTION
FCC NOTICE:
This equipment has been tested and found to comply with part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when operated in a residential environment. If this equipment does cause interference to radio or 
television reception, which can be determined by turning the equipment off and on, use the equipment in another location and/or utilize 
an electrical outlet different from that used by the receiver. If necessary, consult the dealer or an experienced radio/TV technician for 
help. You may find the booklet, “Something About Interference”, available from FCC local regional offices, helpful.
This product utilizes both a Cathode Ray Tube (CRT) and 
other components that contain lead. Disposal of these 
materials may be regulated in your community due to 
environmental considerations. For disposal or recycling 
information please contact your local authorities, or the 
Electronics Industries Alliance: 
FCC WARNING :
ANY UNAUTHORIZED CHANGES OR MODIFICATIONS TO THIS EQUIPMENT WOULD VOID THE 
USER’S AUTHORITY TO OPERATE IT.
AVERTISSEMENT :
AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OU DE CHOCS ÉLECTRIQUES, NE PAS 
EXPOSER CET APPAREIL À LA PLUIE OU À UNE HUMIDITÉ EXCESSIVE.
CAUTION:
LASER RADIATION WHEN OPEN. 
DO NOT STARE INTO BEAM.
(Inside of product)
CAUTION:
UNIT IS A CLASS I LASER PRODUCT.
HOWEVER, THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE 
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE 
UNIT CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR 
EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO 
LOOK INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES 
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS 
RADIATION EXPOSURE. 
DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR THE UNIT YOURSELF. 
REFER SERVICING TO QUALIFIED PERSONNEL.ATTENTION:
RAYONNEMENT LASER EN CAS 
D’OUVERTURE.
NE PAS REGARDER DANS LE 
FAISCEAU.
Attention :
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA 
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude 
to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part 
of this unit.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
RISK OF ELECTRIC SHOCK
DO NOT OPENCAUTION
This symbol alerts the user that important literature concerning the operation and main te nance of 
this unit has been included. Therefore, it should be read carefully in order to avoid any problems. 
						

							4For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
  IMPORTANT SAFEGUARDS AND PRE CAU TIONS
TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, INJURY TO PERSONS OR DAMAGE TO 
THIS PRODUCT, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL 
WARNINGS IN THE MANUAL AND ON THE PRODUCT.
„ INSTALLATION
1   POWER SOURCE CAUTION
  Operate only from power source indicated on unit or in this manual. If uncertain, have 
your Electric Utility Service Company or Video Products Dealer verify your home 
power source.
2   POWER CORD PLUG
  For safety, this unit has a polarized type plug (one wide blade), or a three-wire 
grounding type plug. Always hold the plug firmly and make sure your hands are dry 
when plugging in or unplugging the AC power cord. Regularly remove dust, dirt, etc. 
on the plug.
  POLARIZED PLUG CAUTION:
  The plug fits into outlet only one way. If it cannot be fully inserted, try reversing it. If it 
still will not fit, have an electrician install the proper wall outlet. Do not tamper with the 
plug.
  GROUNDING PLUG CAUTION:
  The plug requires a three-hole grounding outlet. If necessary, have an electrician 
install the proper outlet. Do not tamper with the plug.
3   POWER CORD
  To avoid unit malfunction, and to protect against electrical shock, fire or personal 
injury:
•  Keep power cord away from heating appliances and walking traffic. Do not rest 
heavy objects on, or roll such objects over the power cord.
•  Do not tamper with the cord in any way.
•  An extension cord should have the same type plug (polarized or grounding) and 
must be securely connected.
•  Overloaded wall outlets or extension cords are fire hazards.
•  Frayed cords, damaged plugs, and damaged or cracked wire insulation are 
hazardous and should be replaced by a qualified electrician.
4  DO NOT BLOCK VENTILATION HOLES
  Ventilation openings in the cabinet release heat generated during operation. If 
blocked, heat build-up may result in a fire hazard or heat damage to cassettes or 
discs.
  For your protection:
a.  Never cover ventilation slots while unit is ON, or operate unit while placed on a 
bed, sofa, rug, or other soft surface.
b.  Avoid built-in installation, such as a book case or rack, unless properly ventilated.
5  AVOID EXTREMELY HOT LOCATIONS OR SUDDEN TEMPERATURE CHANGES
  Do not place unit over or near a heater or radiator, in direct sunlight, inside closed 
vehicles, in high temperature locations [over 95 °F (35 °C)], or in over 75 % humidity. 
If unit is suddenly moved from a cold place to a warm one, moisture may con dense in 
unit and on the disc causing damage. Never subject unit to vibration, impact, or place 
it so that the surface is tilted as internal parts may be seriously dam aged.
6  TO AVOID PERSONAL INJURY
•  Never place unit on support or stand that is not firm, level, and 
adequately strong. The unit could fall causing serious injury to a 
child or adult and damage to the unit.
•  Move any appliance and cart combination with care. Quick 
stops, excessive force, and uneven surfaces may cause objects 
to overturn.
•  Carefully follow all operating instructions.
„ USING THE UNIT
„ SERVICE
Before unit is brought out of storage or moved to a new location, refer again to the 
INSTALLATION section of these safe guards.
1  KEEP UNIT WELL AWAY FROM WATER OR MOISTURE, 
  such as vases, sinks, tubs, etc.
2  IF EXPOSED TO RAIN, MOISTURE, OR STRONG IMPACT, 
  unplug unit and have it inspected by a qualified service technician before use.
3 ELECTRICAL STORMS
  During a lightning storm, or before leaving unit unused for extended periods of 
time, disconnect all equipment from the power source as well as the antenna 
and cable system.
4  WHEN UNIT IS PLUGGED IN
• DO NOT OPERATE IF:
- liquid has spilled into unit.
- unit was dropped or otherwise damaged.
- unit emits smoke, odours, or noises. Immediately unplug unit, and have it 
inspected by a service technician to avoid potential fire and shock hazards.
•  Never drop or push any object through openings in unit. Touching internal 
parts may cause electric shock or fire hazard. Do not put any foreign object on 
the tray.
•  Keep magnetic objects, such as speakers, away from unit to avoid electrical 
interference.
5 USING ACCESSORIES
  Use only accessories recommended by the manufacturer to avoid risk of fire, 
shock, or other hazards.
6 CLEANING UNIT
  Unplug unit. Use a clean, dry, chemically untreated cloth to gently remove dust 
or debris. DO NOT USE cleaning fluids, aerosols, or forced air that could over-
spray, or seep into unit and cause electrical shock. Any substance such as wax, 
adhesive tape, etc. may mar the cabinet surface. Exposure to greasy, humid, or 
dusty areas may adversely affect internal parts.
1  DO NOT SERVICE PRODUCT YOURSELF
  If, after carefully following detailed operating in struc tions, the unit does not operate 
properly, do not attempt to open or remove covers, or make any adjustments not 
described in the manual. Unplug unit and contact a qualified service tech ni cian.
2 REPLACEMENT OF PARTS
  Make sure the service technician uses only parts specified by the manufacturer, 
or that have equal safety char ac ter is tics as original parts. The use of unauthorized 
substitutes may result in fire, electric shock, or other hazards.
3  SAFETY CHECK AFTER SERVICING
  After unit is serviced or repaired, request that a thorough safety check be done as 
described in the manufacturer’s service literature to ensure video unit is in safe 
operating condition.
1  SAFE ANTENNA AND CABLE CONNECTION
  An outside antenna or cable system must be properly grounded to provide 
some protection against built up static charges and voltage. Section 810 of the 
National Electrical Code, ANSI/NFPA 70 (in Canada, part 1 of the Canadian 
Electrical Code) provides information regarding proper grounding of  the 
mast and supporting structure, grounding of the lead-in wire to an antenna 
discharge unit, size of grounding conductors, location of antenna discharge 
unit, con nec tion to grounding electrodes, and requirements for the grounding 
electrode.
2   KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR CIRCUITS
  Locate an outside antenna system well away 
from power lines and electric light or power 
circuits so it will never touch these power 
sources should it ever fall. When installing 
antenna, absolutely never touch power lines, 
circuits or other power sources as this could 
be fatal.
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENTANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC- NATIONAL ELECTRICAL CODE
„ OUTDOOR ANTENNA INSTALLATION
WARNING 
						

							5
Getting StartedGetting
 Started
TV
 Operation
Disc
 Operation
Information
  Table of Contents
Information
Getting Started
TV Operation
Disc Operation Information
Before Using ............................................................................................................................ 2
Safety Precautions/Mesures de sécurité .............................................................................. 3
IMPORTANT SAFEGUARDS AND PRECAUTIONS ............................................................... 4
Information ............................................................................................................................... 6
Location of Controls ............................................................................................................... 8
Connections ........................................................................................................................... 10
Tuning TV ............................................................................................................................... 13
TV Operation .......................................................................................................................... 16
MTS Broadcast / TV Stereo System ..................................................................................... 18
TV Timer Features ................................................................................................................. 19
Closed Caption System ........................................................................................................ 20
Video / Audio Setting ............................................................................................................ 22
V-Chip Control Features .......................................................................................................24
Display Features .................................................................................................................... 28
Basic Disc Operation ............................................................................................................ 29
DVD-RAM Operation .............................................................................................................. 33
Disc Operation -Using Information Screen- ........................................................................ 35
Special Disc Operation .........................................................................................................38
Settings for DVD Operation .................................................................................................. 41
Warning and Instruction Displays ....................................................................................... 45
Glossary ................................................................................................................................. 45
Before Requesting Service ................................................................................................... 46
Guía rápida de uso en español ............................................................................................ 47
Limited Warranty ................................................................................................................... 52
Customer Services Directory ............................................................................................... 53
Specifications ........................................................................................................................ 54
Index ....................................................................................................................................... 55 
						

							6For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
•  Insert so the poles (+ and - ) match those in the remote control.
•  Do not use rechargeable type batteries.
1  Open the cover.
3  Close the cover.
2  Insert batteries as marked.
Do not:•  Mix old and new batteries.
•  Use different types at the same time.
•  Heat or expose to flame.
•  Take apart or short circuit.
•  Attempt to recharge alkaline or manganese batteries.
•  Use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can 
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long 
period of time. Store in a cool, dark place.
  Loading the Batteries
Unit auto adjusts clock for DST (Daylight Saving Time.)
 
DST (Daylight Saving Time)
•  If your area does not observe Daylight Saving Time, select DST : OFF 
(see “Manual Clock Setting” on page 14).
•  Keep these time changes in mind when pro gram ming the unit for timer 
recording.
■ Spring (First Sunday in April)
DST: ON ➞ Sets clock ahead one hour.
■ Autumn (Last Sunday in October)
DST: ON ➞ Turns clock back one hour.
Information
 
Information (Unit)
 
Discs that can be played
„
 Discs that cannot be played
DVD with Region No. other than “1” or “ALL”, DVD from PAL 
system, DVD-ROM, DVD+R, DVD-AUDIO, DVD-RW, DVD+RW, 
CD-ROM, CDV, CVD, CD-G, CD-TEXT, SACD, Photo-CD.
Note:
•  The digital audio content side of DualDiscs do not meet the technical 
specifications of the Compact Disc Digital Audio (CD-DA) format so 
may not play back in this unit.
•  It may not be possible to play CD-R, CD-RW, DVD-R and DVD-RAM in all 
cases due to the type of disc or condition of the recording.
Disc type Disc LogoIndication in these operating 
instructions
DVD-Video
DVD-V
(DVD-Video)
DVD- R*1
DVD- R AM*2 RAM
CDCD
(CD-DA)
Video CD
VCD
CD-RCD
or
VCDCD-RW
Do not use irregularly shaped discs (e.g. heart-shaped), as these 
can damage the unit.
*1  DVD-Video formatted discs [finalized].
*2  Discs recorded using Version 1.1 of the Video Recording Format.
  Information (Disc)
The unit may tip or fall if not situated on a stable surface, if 
pushed, or during an earthquake. Use a strong rope or chain 
(not included) to fasten the unit firmly to a strong wall support.
  Safety Precaution 
						

							7
Getting Started
*  A process that allows play on compatible equipment.
„ DVDs that can be played
You can play discs with these symbols.
„ Playing  DVDs
The producer of these discs can control how they are played so 
you may not always be able to control play as described in these 
operating instructions. Read the disc’s instructions carefully.
„ CD-R and CD-RW discs
This unit can play CD-R and CD-RW if they are formatted as CD-
DA (digital audio) and finalized*.
„ DVD-R  discs
Panasonic DVD-R recorded and finalized* on a Panasonic DVD 
video recorder are played as DVD-Video on this unit.
„DVD-RAM discs
DVD-RAM discs must meet the following conditions for this unit 
to be able to play them.
•  Some parts of the disc, for example where one program ends and another 
begins, may not play smoothly. •  Remove TYPE 2 and 4 discs from their cartridges before use, then return 
them when you are finished. Read the instructions for the disc carefully.
Non-cartridge discTYPE 2 or 4 disc
Type• Non-cartridge discs
•  Discs that can be removed from their cartridges (TYPE 2 
and 4)
Capacity•  12 cm (5″) 9.4 GB (double-sided) and 4.7 GB (single-sided)
•  8 cm (3″) 2.8 GB (double-sided)
•  The region number of this player is “1”.
•  The player will play DVD-Video marked with labels bearing “1” or “ALL”.
1
For U.S.A. and Canada
Example:
ALL2
4 1
  Disc Handling
This unit is designed and man u fac tured to respond to the Region 
Management Information that is recorded on a DVD disc. If the 
Region number described on the DVD disc does not cor re spond to 
the Region number of this unit, this unit cannot play this disc.
  Region Management Information
Handling precautions•  Sticking a label on the disc may impair DVD-
R playback.
•  Do not attach sticker to disc. (Do not use 
discs with exposed adhesive from tape or 
left over peeled-off stickers.)
•  Only hold disc by edges as shown at right. 
Fin ger prints, dirt and scratches can cause 
skipping and distortion.
•  Do not write on label side of disc.
•  Never use record cleaning sprays, benzine, 
thinner, static electricity prevention liquids, 
or any other solvent.
•  Do not try to close disc tray when disc is not 
properly placed.
Disc tray
Disc
If disc is brought from a cold to a warm environment, moisture 
may form on the disc
Wipe away moisture with a soft, dry, lint-free cloth before using 
disc. (See above.)
Improper disc storage
Discs can be damaged if stored or left in areas:
•  Exposed to direct sunlight.
•  That are humid or dusty.
•  Near heat (i.e. heater, radiator, etc.).
With a soft, damp (water only) cloth, gently wipe from the center 
hole to the outer edge as shown below. (Wiping in a circular pattern 
will scratch the surface.)
  To clean disc surface
„
 DVD-RAM,  DVD-R  : 
Clean only with DVD-RAM disc cleaner. Never use cloths or 
cleaners for CDs, etc.
  Information (MAIN MENU Screen)
In the Main Menu display, only icons which can be selected appear 
normally while those not available appear dark.
Example:
When the unit is used for the first time, 
the DVD icon is dark because it cannot 
be selected in this condition (see right). 
However, when DVD is pressed to enter 
DVD mode, the DVD icon becomes 
selectable.
        MAIN MENU
          LOCK LANGUAGE
    TV    CLOCK   CH
 SELECT:         SET:SET
 END   :ACTION 
						

							8For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
  Remote Control Buttons
 
Location of Controls
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1718
19
20
21
22
23
24
25
26
27
28
31 29
30
1
  OPEN / CLOSEOpens or closes the disc tray.
2
  POWERTurns the unit on or off.
3
  DISPLAYDisplays the TV status and clock. In DVD 
mode, displays disc and unit information.
4
  RAPID TUNEDisplays the last channel you were watching.
5
  MUTEMutes the sound instantly.
6
  INPUTChanges input source.
7
  ACTIONDisplays Main Menu.
8
  SELECT ▲▼◄►Controls navigation around on-screen menu.
9
  CHANNEL UP/DOWNSelects a channel.
10
  SKIP- Ι◄◄Skips back one chapter or track. Goes to 
previous menu screen. 
11
  STOPStops playback.
12
  STILLPauses picture in Playback mode and frame 
advance picture in Still mode.
13  SEARCH ◄◄ /
SLOW-Activates reverse rapid scene search in Play 
mode.
Increases reverse slow motion speed in still 
mode. (Up to 5 levels)
14
  AUDIOSelects the desired audio mode.
15
  ANGLESelects the desired angle in DVD mode.
16
  TIMERSet ON TIMER or SLEEP TIMER.
17
  RETURNReturns to DVD menu screen.
18
  DVDSet to DVD mode.19
  TVSets to TV mode.
20
  NUMBER KeysSelects a channel directly.
21  ADD/DELETE/
CLEARAdds or deletes a channel. Cancels an item 
on the screen.
22
  MENU / PLAY LISTDisplays DVD menu. Displays Play List. 
(DVD-RAM)
23
  SETSets selected menu.
24
  VOLUME UP/DOWNAdjusts volume.
25
  PLAYBegins playback.
26
  SKIP+ ►►ΙSkips one chapter or track. Goes to next 
menu screen.
27
  TITLE / D.NAVISelects the desired title by number on some 
DVDs. Displays Direct Navigator. (DVD-RAM).
28  SEARCH ►► /
SLOW+Activates forward rapid scene search in Play 
mode.
Increases forward slow motion speed in still 
mode. (Up to 5 levels)
29
  SURROUND / VSSCreates a deeper, 3-D sound effect.
30
  SUB TITLESelects a different subtitle language.
31
  ZOOMEnlarges specific portions of DVD picture. 
						

							9
Getting Started
„Front View 
  Unit Buttons
„Rear View
1Built In 
SpeakersEquipped with 2 front 
speakers.
2
  Phones JackConnect an ear phone or 
headphones.
3  Video Input 
Connector 2Connect from other 
component. (LINE 2)
4  Audio Input 
Connector 2Connect from other 
component. (LINE 2)
5
  Disc TrayPlace compatible discs here.
6
POWERTurns the unit on or off.
7VOLUME UP/
DOWNAdjusts volume.
8CHANNEL 
UP/DOWNSelects a channel.9DVD OperationSKIP-Skips back one chapter 
or track. Goes to previous 
menu screen.
10
SKIP+Skips one chapter or track. 
Goes to next menu screen.
11
STOPStops playback.
12
PLAYBegins playback.
13OPEN/
CLOSEOpens or closes the disc 
tray. 23 645
78910
1112
13 1514 1
14ON TIMER 
IndicatorLights when the On Timer 
is set.
15
  Remote SensorReceives infrared signal from 
remote control.
1 AC Power PlugWhen plugged into an 
AC outlet, this unit 
consumes 0.9 W of 
electric power in OFF 
condition.
2  Optical digital audio output 
connectorOutputs audio signal. 
(Digital)
3  Audio Output Connector 
(L/R)Outputs audio signal. 
(Analog)12 3 45 6
4 Audio Input Connector 1Connect from other 
component. (LINE 1)
5 Video Input Connector 1Connect from other 
component. (LINE 1)
6  VHF/UHF Antenna 
Input TerminalInput terminal for an 
antenna or cable box 
signal. 
						

							10For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
„ Antenna  Connection
Connect the cable from the Antenna to the VHF/UHF terminal 
on the unit.
„ Cable  Connection
Connect the cable supplied by your local cable company 
to the VHF/UHF terminal on the unit. Overtightening “Nut type” RF coaxial cables may damage 
jacks. Finger tighten only.
•  Turn off the power supply for all com po nents before making any connections.
•  If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to 
fashion a cable to suit the component concerned.
•  Read the instruction manual for each system component care ful ly before connecting it.
Notes on con nec tions
 
Connecting the RF in Terminal
Note to CABLE system installer:
This re mind er is pro vid ed to call the CABLE (Cable TV) System 
Installer’s at ten tion to Article 820-40 of the NEC that pro vides 
guide lines for proper grounding and, in par tic u lar, specifies that 
the cable ground shall be con nect ed to the ground ing system of 
the build ing, as close to the point of cable entry as practical.
Mixer VHF 
AntennaUHF 
Antenna
Or
Cable Box
In from CABLE
CAUTION
Connections
Connects VCRs and other peripheral equipment
„ AV Input terminal 1 is used
  Connecting the “1, 2” AV Input Terminals
Notes:•  Similar connections are available at the “1, 2” AV input terminals.
•  AV Input terminal 2 is located on the front of the unit.
Audio
OUT Video
OUT
RL