Panasonic Tv Dvd Combination Pv 27df5 Operating Instructions

11
Getting Started
Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and 
speakers. There are two types of connection, digital and analog.
Connect an AV amplifier with Dolby Digital or DTS 
decoders
„ Digital  connection
  Connecting the Audio Output Terminal
Please see amplifier manual 
for speaker requirements. Speakers (example)Amplifier with built in Dolby Digital 
or DTS decoders.
Firmly connect the 
cable to the...

12For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Connect an analog amplifier to enjoy high-quality stereo sound 
with sampling frequencies of 96 kHz.
„ Analog  connectionIMPORTANT NOTE:
Caution for optical digital audio output connector:
•  Be sure to refer to page 43 regarding output settings of Dolby Digital, 
DTS, and PCM.
•  CDs and Video CDs can be played as usual.
•  Audio from the Digital Audio Out terminal is only output...

13
TV Operation
POWER
ACT ION
SELECT
▲▼◄►/
SET EJECT
STOP
POWER
PLAY
Tuning TV
Please make all cable or antenna connections before powering on.
Plug the unit power cord into an AC wall outlet.
Settings are made automatically. When 
complete, this screen appears.If setup is incomplete, the following 
screen appears. Check connection of 
Antenna/Cable to the RF in Terminal, 
then try to manually set the clock as 
follows.
a.  Press ACTION on the Remote Control to display 
SET CLOCK Menu screen.
b. Press ▲▼...

14For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
„ To add channel:
Select channel with NUMBER keys and press ADD/DLT.
„ To delete channel:
Select channel with CH ▲▼ 
 or NUMBER keys and press ADD/
DLT.
  Add or Delete a Chan nel
4 Press ▲▼ to select “AUTO CLOCK SET,” then 
press SET.
3  Press SET to display SET CLOCK screen.
2 Press ▲▼◄► to select “CLOCK.”
1  Press ACTION to display MAIN MENU.
 
Automatic Clock Setting
4 Press ▲▼ to...

15
TV Operation
4 Press ▲▼ to select “TIME ZONE ADJUST” and 
press SET to subtract or add hour(s) as necessary.
5  Press ACTION twice to exit.
(Only when Auto Clock is set.)
2 Press ▲▼◄► to select “CLOCK.”
3  Press SET to display SET CLOCK screen.
 
Time Zone Adjust
2 Press ▲▼◄► to select “LANGUAGE.”
3  Press SET repeatedly.
1  Press ACTION to display MAIN MENU.
4  Press ACTION to exit.
For French For SpanishFor English
  Change Language Setting
 
Reset all unit Memory Func tions
Returns to factory...

16For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
TV Operation
„ Method  1:
Press CH ▲▼. The display will change as follows.
„ Select desired channel:
Press CH ▲▼ 
 or NUMBER keys.
„ Adjust desired volume level:
Press VOL + or VOL -.
CH▲▼100 key
  Selecting Input Mode
 
Using the CH/VOL Button
VOL+/-
RAPID 
TUNE
MUTE
„ Method  2:
Press INPUT. The display will change as follows.
INPUT
AV Input Terminal 2
Notes:•  The diagram at right is...

17
TV Operation
You can hear a deeper, 3-D sound effect using just the unit’s two 
front speakers.
1 Press SURROUND.•”SURROUND ON” is displayed.
Notes:•  Surround sound effect is not available for normal (mono) broadcasts.
•  The surround effect (TV mode only) is not output to Audio Output L/R 
Connector.
  Surround Sound System
To Cancel, press SURROUND.
When “ON” is selected, the picture is displayed even when a 
broadcast signal is weak or non-existent.
ON:
Picture is displayed regardless of signal...

18For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
MTS Broadcast / TV Stereo System
The following are possible audio broadcast types and on-screen 
displays. The signal being received is indicated with a “ 
 ” mark 
while the selected audio mode is indicated with an arrow. To 
change the audio mode for these broadcasts, see the “Audio Mode 
for TV Viewing” section.
1  Press DISPLAY to display the broadcast signal 
being received.
„ MTS...

19
TV Operation
This unit can be set to automatically power on in one of 2 modes 
(TV or Disc.)Note:
•  If no button on the remote or unit is pressed within 60 minutes after unit 
turns itself on, it will turn itself back off.
1  Press TIMER to display SET TIMER screen.
To Cancel ON-TIMER,
Repeat steps 1-3. Then, press ADD/DLT to clear the time in 
steps 4-5. Now, press TIMER to end. “ON TIMER END” briefly 
appears on-screen.
2 Press ▲▼ to select “ON TIMER.”
3  Press SET to display ON TIMER screen.
4...

20For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Closed Caption System
Closed Caption is ...
This multi-use system not only allows the hearing impaired to 
enjoy selected programs, but also allows one to watch programs 
with the volume muted.
1  Press ACTION to display MAIN MENU.
8  Press ACTION three times to return to the normal 
screen.
2 Press ▲▼◄► to select “TV.”
4 Press ▲▼ to select “CAPTION”.
5  Press SET to display CAPTION...