Panasonic Tv Dvd Combination Pv 27df4 Operating Instructions

							21
TV Operation
3 Press ▲▼ to select “TIME ZONE 
ADJUST” and press SET to subtract 
or add hour(s) as necessary.
4  Press ACTION twice to exit.
(Only when Auto Clock is set.)
1 Press ▲▼ ◄ ► to select “CLOCK.”
2 Press SET.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
SET CLOCK
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST :+1
SELECT: SET:SET
END :ACTION
SET CLOCK
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST : 0
SELECT: SET:SET
END :ACTION
  Time Zone Adjust
2 Press ▲▼ ◄ ► to select “LANGUAGE.”
3  Press SET repeatedly.
1  Press ACTION to display MAIN 
MENU.4  Press ACTION to exit.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
For French
MENU
DVD BLOCAGE LANGUE
TELE HORLOGE CANAL
SEL.: REGLER:SET
FIN :ACTION
For Spa n ishMENU PRINCIPAL
DVD BLOQUEO IDIOMA
TV RELOJ CANAL
ELEGIR: FIJAR:SET
TERMINAR:ACTION
For English
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
  Change Language Setting
 
Reset all unit Memory Func tions
Returns to factory setting. Use if relocating 
unit, or if Initial Setup needs to be redone.
1  Turn the unit Power on.
2  Press and hold both PLAY and 
SKIP-  
 on the unit for more than 5 
seconds.
• The power will shut off.
3  Perform “Initial Setup” on page 18.
EnglishSpanish
French
+10-1
•  “TIME ZONE ADJUST” returns to “0” if clock is 
set manually.
Note 
						

							22For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo

						

							23
TV Operation
When selecting CABLE channels 100 to 125 
with the NUMBER keys, first press the 100 
key, and then enter the remaining two digits.
Press R-TUNE to display the last channel 
you were watching.
Press MUTE to instantly mute the sound. 
Press again to restore the previous sound 
level. Example 1:
To select channel 125, first press the 100 
key, then 2, then 5.
Example 2:
To select channel 12, first press the 1 key, 
then 2.
Example 3:
To select channel 2, first press the 0 key, 
then 2.
You can hear a deeper, 3-D sound effect 
using just the unit’s two front speakers.
Press SURROUND.
•”SURROUND ON” is displayed.
To Cancel, press SURROUND.
• Surround sound effect is not available for normal 
(mono) broadcasts.
• The surround effect (T V mode only) is not output 
to Audio Output L/R Connector.
  Using the Number and 100 keys
 
Audio Mute
 
Surround Sound System
 
Rapid Tune
Notes 
						

							24For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
The following are possible audio broadcast 
types and on-screen displays. The signal 
being received is indicated with a “ 
 ” mark 
while the selected audio mode is indicated 
with an arrow. To change the audio mode for 
these broadcasts, see the “Audio Mode for 
TV Viewing” section.
Press DISPLAY to display the broadcast 
signal being received.
MTS Stereo broadcast:
Multi-channel Television Sound Stereo 
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the display 
flickers, select MONO audio mode for possible 
improvement.
SAP broadcast:
Secondary Audio Program (sub language).
Select SAP audio mode for the sub 
language.
Press AUDIO to select the desired audio 
mode as described above. (Arrow shows 
selection.)
MONO broadcast:
Normal monaural sound broadcast.
< Example >
Equipped with -TV Noise Reduction 
for true MTS reproduction. -TV Noise 
Reduction is required for good stereo 
separation and audio fidelity. 
 is a 
registered trademark, and is licensed by 
 Te c h n o l o g y  L i c e n s i n g .MTS Stereo and SAP broadcast:
Multi-channel Television Sound Stereo (main 
language) and Secondary Audio Program 
(sub language) broadcasts are being 
received simultaneously. Select the STEREO 
or SAP audio mode.
•  Each press of 
AUDIO will change 
the audio mode as 
shown below.
•  “SAP” is selected 
with first press of 
AUDIO.
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
12:00AM CH 08
STEREO
SAP
MONO
DISPLAY
AU DIO
  Receivable Broadcast Types
 
Audio Mode for TV Viewing
12:00AM CH 08
STEREO
SAP
MONO
MTS Broadcast / TV Stereo System 
						

							25
TV Operation
ON TIMER
10:00AM CH 05
CANCEL:ADD/DLT
SELECT: SET:SET
END :TIMER
SET TIMER
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :TIMER
This unit can be set to automatically power on 
in one of 2 modes (TV or Disc.)
•  If no button on the remote or unit is pressed 
within 60 minutes after unit turns itself on, it will 
turn itself back off.
1  Press TIMER to display SET TIMER 
screen.
To Cancel ON-TIMER,
Repeat steps 1-3. Then, press ADD/DLT to 
clear the time in steps 4-5. Now, press 
TIMER to end. “ON TIMER END” briefly 
appears on-screen.
2 Press ▲▼ to select “ON TIMER.”
3  Press SET to display ON TIMER 
screen.
4 Press ▲▼ to select desired settings.
5  Press SET to set the ON-TIMER time 
and ON-TIMER mode.
To Make Corrections, use ▲▼ and ◄ ► 
to move back and correct.
6  Press TIMER to 
set ON TIMER.
•  “ON TIMER SET” 
is displayed.
• ON-TIMER 
Indicator lights up 
on the unit.
This unit can be set for auto power off.
1  Press TIMER to display SET TIMER 
screen.
2 Press ▲▼ to select “SLEEP TIMER.”
3  Press SET repeatedly to select the 
desired time.
To cancel, press SET repeatedly until 0 
appears.
4  Press TIMER to return to the normal 
screen.
•  Pressing DISPLAY with sleep timer set 
displays remaining time.
•  SLEEP TIMER Indicator lights up on the unit.•  Make sure a disc 
is inserted if Disc 
(DVD/CD) mode is 
selected.
SET TIMER
ON TIMER
SLEEP TIMER: 0
SELECT: SET:SET
END :TIMER
ON TIMER
10:--AM CH --
SELECT: SET:SET
END :TIMER
  ON-TIMER
 
Sleep Timer
Note
SET SELECT
▲▼ ◄ ►
TIMER DISPLAY
ADD/DLT
TV Timer Features
3060
090
ON-TIMER mode 
selection order
CH01
CH125
DiscLowest 
channel
Highest 
channel
ON-TIMER 
IndicatorSLEEP TIMER 
Indicator 
						

							26For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
Closed Caption is ...
This multi-use system not only allows the 
hearing impaired to enjoy selected 
programs, but also allows one to watch 
programs with the volume muted.
1  Press ACTION to display MAIN 
MENU.
8  Press ACTION three times to return 
to the normal screen. 2 Press ▲▼ ◄ ► to select “TV.”4 Press ▲▼ to select “CAPTION”.
5  Press SET to display CAPTION 
screen.
6 Press ▲▼ to select “CAPTION 
MODE.”
7  Press SET repeatedly to select mode.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
SET UP TV
CAPTION
INPUT SELECT :TUNER
SET UP VIDEO/AUDIO
DVD VOL ADJUST :+2
SELECT: SET:SET
END :ACTION
  Closed Caption Mode Feature
3  Press SET to display SET UP TV 
screen.
CAPTION
CAPTION MODE : OFF
CC ON MUTE : CAP C1
SELECT: SET:SET
END :ACTION
Caption Mode: CAP C1 or C2
A narration of selected TV programs is 
displayed. 
Check TV program listings for CC (Closed 
Caption) broadcasts.
Caption Mode: TEXT C1 or C2
Most of the screen will be blocked out. 
When the TV station broadcasts 
information, such as program listings, it 
will appear in this space.
Caption Mode: OFF
Closed Caption/Text narration will not be 
displayed.
•  The closed caption or text signal may be 
broadcast over C1, C2, or both. Also, text 
contents can vary so you may wish to try 
different settings. 
Note
ACT ION
SET SELECT
▲▼ ◄ ► MUTE
OFFCA P C1
TEXT C2CA P C2TEXT C1
Closed Caption System 
						

							27
TV Operation
Closed Caption narration, if available, is 
displayed when MUTE button is pressed for 
silence.
1  Press ACTION to display MAIN 
MENU.
•  When a disc supporting closed captions is used, 
the subtitle and the closed caption may overlap. 
In this case, turn the subtitle or caption mode off. 
(See page 42.)
2 Press ▲▼ ◄ ► to select “TV.”
3  Press SET to display SET UP TV 
screen.
10 Press ACTION three times to return 
to the normal screen.
11 Press MUTE to mute the sound and 
display closed captioning.
•  To cancel, press MUTE again.
4 Press ▲▼ to select “CAPTION”.
5  Press SET to display CAPTION 
screen.
6 Press ▲▼ to select “CAPTION 
MODE.”
7  Press SET repeatedly to select “OFF.”8 Press ▲▼ to select “CC ON MUTE.”
9  Press SET repeatedly to select 
desired  mode.
•  The caption may be broadcast over CAP C1 
or C2.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
SET UP TV
CAPTION
INPUT SELECT :TUNER
SET UP VIDEO/AUDIO
DVD VOL ADJUST :+2
SELECT: SET:SET
END :ACTION
CAPTION
CAPTION MODE : OFF
CC ON MUTE : CAP C1
SELECT: SET:SET
END :ACTION
CAPTION
CAPTION MODE : OFF
CC ON MUTE : CAP C1
SELECT: SET:SET
END :ACTION
  Caption On Mute Feature
Note
NOCA P C1
CA P C2
CC ON MUTE: CAP C1 or C2
A narration of selected TV programs is 
displayed when MUTE button is pressed 
for silence.
CC ON MUTE: NO
A narration will not be displayed when 
MUTE button is pressed for silence. 
						

							28For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
1  Do steps 1 - 5 at left.
2 Press ▲▼ to 
select “AUDIO 
MENU.”
3  Press SET to 
select desired 
mode.
4  Press ACTION three times to end 
setup.
•  The effects of this feature on the signal are not 
output to the Audio/ Video Output Connector.
•  When AUDIO MENU mode is “AUTO,” the 
AUDIO ADJUST setting will be “STANDARD.”
•  AUDIO MENU settings remain in memory.
•  VIDEO MENU settings do not remain in memory.
6 Press ▲▼ to 
select “VIDEO 
MENU.”
7 Press SET 
repeatedly to 
select desired 
mode.
8  Press ACTION three times to end 
setup.
NORMALFactor y setting.
MOVIE Picture is adjusted for a movie-like 
feel.
NIGHT Color and picture intensity are 
adjusted to be easier on the eyes for 
night viewing.
This feature allows easy setting of picture 
and sound suitable for each program 
source.
1  Press ACTION to display MAIN 
MENU.
2 Press ▲▼ ◄ ► to 
select “TV.”
3  Press SET to 
display SET UP 
TV screen.
4 Press ▲▼ to 
select “SET UP 
VIDEO/AUDIO.”
5  Press SET to 
display.
MUSICSound suited to music.
(Factory setting)
SPEECHSound suited to dialogue.
NORMAL
AUTO[Audio AGC (Auto Gain Control)] The 
sound level is automatically adjusted to 
suit the program source.
Low StandardHigh Volume level
TV TVCDAUDIO MENU : NORMAL
Volume level
Low StandardHigh
TV TVCDAUDIO MENU : AUTO
MOVIESound suited to movies.
SET UP TV
CAPTION
INPUT SELECT :TUNER
SET UP VIDEO/AUDIO
DVD VOL ADJUST :+2
SELECT: SET:SET
END :ACTION
SET UP VIDEO/AUDIO
VIDEO MENU :NORMAL
VIDEO ADJUST
AUDIO MENU :MUSIC
AUDIO ADJUST
SELECT: SET:SET
END :ACTION
SET UP VIDEO/AUDIO
VIDEO MENU :NORMAL
VIDEO ADJUST
AUDIO MENU :MUSIC
AUDIO ADJUST
SELECT: SET:SET
END :ACTION
  Video Menu
 
Audio Menu
Video / Audio Menu
Notes
ACT ION
SELECT
▲▼ ◄ ►
SET
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION 
						

							29
TV Operation
Press ACTION to display MAIN MENU.
1 Press ▲▼ ◄ ► to 
select “TV.”
2  Press SET to 
display SET UP 
TV screen.
3 Press ▲▼ to 
select “SET UP 
VIDEO/AUDIO.”
4  Press SET to 
display.
5 Press ▲▼ to 
select “VIDEO 
ADJUST.”
6  Press SET to 
display.
7 Press ▲▼ to 
select an item.
8 Press ◄► to 
adjust.
To Reset VIDEO Controls.
Press ▲▼ and SET to select and set 
“STANDARD.” All controls return to their 
factory settings.
9  Press ACTION four times to end 
setup.
COLOR ControlAdjust color intensity.
TINT ControlAdjust for natural flesh tones.
BRIGHTNESS 
ControlAdjust picture brightness.
PICTURE ControlAdjust picture intensity by 
adjusting both contrast and 
color level in the proper 
balance.
SHARPNESS 
ControlIncreases or decreases the 
level of detail in the image.
Press ACTION to display MAIN MENU.
1 Press ▲▼ ◄ ► to 
select “TV.”
2  Press SET to 
display SET UP 
TV screen.
9  Press ACTION four times to end 
setup. 3 Press ▲▼ to 
select “SET UP 
VIDEO/AUDIO.”
4  Press SET to 
display.
5 Press ▲▼ to 
select “AUDIO 
ADJUST.”
6  Press SET to 
display.
7 Press ▲▼ to 
select an item.
8 Press ◄► to 
adjust.
To Reset AUDIO Controls.
Press ▲▼ and SET to select and set 
“STANDARD.” All controls return to their 
factory settings.
BASS ControlTo adjust the intensity of low 
frequency sound.
TREBLE ControlTo adjust the intensity of high 
frequency sound.
BALANCE ControlControls the difference in 
audio level between the left 
and right speaker.
•  The levels set here do not affect other audio 
equipment when connected to the Audio 
Output L/R Connector.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTIONMAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
SET UP TV
CAPTION
INPUT SELECT :TUNER
SET UP VIDEO/AUDIO
DVD VOL ADJUST :+2
SELECT: SET:SET
END :ACTIONSET UP TV
CAPTION
INPUT SELECT :TUNER
SET UP VIDEO/AUDIO
DVD VOL ADJUST :+2
SELECT: SET:SET
END :ACTION
SET UP VIDEO/AUDIO
VIDEO MENU :NORMAL
VIDEO ADJUST
AUDIO MENU :MUSIC
AUDIO ADJUST
SELECT: SET:SET
END :ACTIONSET UP VIDEO/AUDIO
VIDEO MENU :NORMAL
VIDEO ADJUST
AUDIO MENU :MUSIC
AUDIO ADJUST
SELECT: SET:SET
END :ACTION
VIDEO ADJUST
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
STANDARD
SELECT: ADJUST:
END :ACTIONAUDIO ADJUST
BASS
TREBLE
BALANCE
STANDARD
SELECT: ADJUST:
END :ACTION
  Video Adjustment 
Audio Adjustment 
						

							30For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
When “ON” is selected, the picture is 
displayed even when a broadcast signal is 
weak or non-existent.
ON:
Picture is displayed regardless of signal 
condition, and may not always be clearly 
visible.
OFF:
Screen turns solid blue when signal is 
absent or weak.
1  Press ACTION to display MAIN 
MENU.
2 Press ▲▼ ◄ ► to select “CH.”
3  Press SET to display SET UP 
CHANNEL screen.
6  Press ACTION twice to return to the 
normal screen. 4 Press ▲▼ to select “WEAK SIGNAL 
DISPLAY.”
5  Press SET to set “ON” or “OFF.”
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
SET UP CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY:OFF
SELECT: SET:SET
END :ACTION
Note
•  If unit is connected to equipment which has 
blue back feature, selecting “ON” will have 
no effect on the other equipment.
ACT ION
SET SELECT
▲▼ ◄ ►
Weak Signal Display Feature