Panasonic Tv Dvd Combination Pv 27df4 Operating Instructions

							11
Getting Started
  Location of Controls
 
Remote Control Buttons
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1718
19
20
21
22
23
24
25
26
27
28
31 29
30
1
  OPEN / CLOSEOpens or closes the disc tray.
2 
POWERTurns the unit on or off.
3 
DISPLAYDisplays the T V status and 
clock. In DVD mode, displays 
disc and unit information.
4  RAPID TUNEDisplays the last channel you 
were watching.
5  MUTEMutes the sound instantly.
6 
INPUTChanges input source.
7 
ACTIONDisplays Main Menu.
8 
SELECT ▲▼ ◄ ►Controls navigation around 
on-screen menu.
9  CHANNEL 
UP/DOWNSelects a channel.
10  SKIP- Skips back one chapter or track. 
Goes to previous menu screen. 
11  STOPStops playback.
12 
STILLPauses picture in Playback 
mode and frame advance 
picture in Still mode.
13  SEARCH  /
SLOW-Activates reverse rapid scene 
search in Play mode.
Increases reverse slow motion 
speed in still mode. (Up to 5 
levels)
14  AUDIOSelects the desired audio mode.
15 
ANGLESelects the desired angle in 
DVD mode.
16  TIMERSet ON TIMER or SLEEP 
TIMER.
17  RETURNReturns to DVD menu screen.
18 
DVDSet to DVD mode.
19 
TVSets to T V mode.
20 
NUMBER KeysSelects a channel directly.
21 
ADD/DELETE/
CLEARAdds or deletes a channel. 
Cancels an item on the screen.
22  MENU / PLAY 
LISTDisplays DVD menu. Displays 
Play List. (DVD -R AM)
23  SETSets selected menu.
24 
VOLUME 
UP/DOWNAdjusts volume.
25  PLAYBegins playback.
26 
SKIP+ Skips one chapter or track. 
Goes to next menu screen.
27  TITLE / D.NAVISelects the desired title by 
number on some DVDs. 
Displays Direct Navigator. 
(DVD-RAM).
28  SEARCH  /
SLOW+Activates for ward rapid scene 
search in Play mode.
Increases forward slow motion 
speed in still mode. (Up to 5 
levels)
29  SURROUND / VSSCreates a deeper, 3 -D sound 
effect.
30  SUB TITLESelects a different subtitle 
language.
31  ZOOMEnlarges specific por tions of 
DVD picture. 
						

							12For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo

						

							13
Getting Started

						

							14
Connections
For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo

						

							15
Getting Started
Connects VCRs and other peripheral equipment

						

							16For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
Enjoy the powerful movie theater and hall-like sound available with multiple channel audio 
found on DVDs by connecting an amplifier and speakers. There are two types of connection, 
digital and analog.
Connect an amplifier to enjoy high-quality 
stereo sound with sampling frequencies of 
96 kHz.

						

							17
Getting Started
IMPORTANT NOTE:
Caution for optical digital audio output 
connector:
•  When connecting an amplifier (with an optical 
digital input connector) which does not contain 
the Dolby Digital or dts decoder, be sure to 
select “PCM” at “Dolby Digital” and “PCM” at “dts” 
in the Settings for DVD Operation “Selecting 
AUDIO OUTPUT” (see pages 56 -57). Other wise, 
any attempt to play DVDs may cause such a high 
level of noise that it may be harmful to your ears 
and damage your speakers.
•  Be sure to refer to pages 56 -57 regarding output 
settings of Dolby Digital, dts, and PCM.
•  CDs can be played as usual.
Notes on audio output from the optical 
digital audio output con nec tor Enjoying digital audio output from the 
digital audio output con nec tor
*1  The type of audio output from the connector can 
be selected by adjusting the Settings for DVD 
Operation. (See pages 56-57.)
*
2  When LPCM is set to OFF in the DVD Main 
Menu, only 48 kHz sampling/16 bit is output. 
When set to ON, sampling of sound quality 
greater than 48 kHz/16 bit is reduced to 
48 kHz/16 bit. (See pages 56-57.)
For your reference:
•  Dolby Digital is a digital sound compression 
technique developed by the Dolby Laboratories 
Licensing Corporation. Supporting 5.1-channel 
surround sound, as well as stereo (2-channel) 
sound, this technique enables a large quantity of 
sound data to be efficiently recorded on a disc.
•  Linear PCM is a signal recording format used in 
CDs. While CDs are recorded in 44.1 kHz/16 bit, 
DVDs are recorded in 48 kHz/16 bit up to 
96 kHz/24 bit.
•  If you have a Dolby Pro Logic Surround decoder, 
you will obtain the full benefit of Pro Logic from 
the same DVD movies that provide full 5.1 
channel Dolby Digital soundtracks, as well as 
from titles with the Dolby Surround mark. For 
information on Panasonic Dolby Pro Logic 
Surround Sound Decoders please contact your 
local dealer.  Turn down the volume, then turn this unit, as 
well as other equipment to be connected, off 
before pro ceed ing with connection.
  Do not block ventilation holes of any equipment 
and arrange it so that air can circulate freely.
 Check List
Note
•  Some dts decoders which do not support 
DVD-dts Interface may not work properly with 
the unit.
DiscSound
recording
formatOptical digital audio 
output from connector
DVD-V
Dolby DigitalDolby Digital bitstream
(1- 5.1 ch) or PCM (48 kHz 
sampling /16 bit only)*1 
Linear PCM
(48/96 kHz
16 / 20 / 24 bit)Linear PCM (2ch)
(48 kHz sampling /16 bit
only)*
2
dtsBitstream or PCM (48 kHz 
sampling /16 bit only)*1
DVD- R AM
Dolby DigitalDolby Digital bitstream
(1- 5.1 ch) or PCM (48 kHz 
sampling /16 bit only)*1 
Linear PCM
(48 kHz
16 bit)Linear PCM (2ch)
CDLinear PCMLinear PCM
(44.1 kHz sampling)
Manufactured under license from Digital 
Theater Systems, Inc. US Pat. No’s. 
5,451,942, 5,956,674, 5,974,380, 
5,978,762, 6,487,535 and other U.S. and 
world-wide patents issued and pending. 
“DTS” and “DTS 2.0 + Digital Out” are 
trademarks of Digital Theater Systems, 
Inc. Copyright 1996, 2003 Digital Theater 
Systems, Inc. All Rights Reserved.
Manufactured under license from Dolby 
Laboratories. “Dolby,” “Pro Logic,” and the 
double-D symbol are trademarks of Dolby 
Laboratories. 
						

							18For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
Please make all cable or antenna 
connections before powering on.
Plug the unit power cord into an AC wall 
outlet.Settings are made 
automatically. When 
complete, this screen 
appears.
If setup is incomplete, 
the following screen 
appears. Check 
connection of 
Antenna/Cable to the 
RF in Terminal, then 
try manually to set the 
clock as follows.
a.  Press ACTION on the Remote to 
display SET CLOCK Menu screen.
b. Press ▲▼ to select the month and 
press SET to set. In the same 
manner, select and set the date, year, 
time, and DST (Daylight Saving Time).
• Press ◄ repeatedly to move the cursor. Press 
▲▼ to make a correction.
c.  Press ACTION twice to start CLOCK 
and exit. 
POWER
ACT ION
SET
CH AUTO SET PROCEEDING
AUTO CLOCK SET
PROCEEDING
CANCEL:STOP
10/25/2004 MON 11:45AM
DST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
AUTO CLOCK SET
IS INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
SET CLOCK
1/ 1/2004 THU 12:00AM
DST:ON
SELECT: SET:SET
START :ACTION
SET CLOCK
10/25/2004 MON 11:45AM
DST:ON
SELECT: SET:SET
START :ACTION
Case 1
Case 2
  Initial Setup (Ready to Play)
•  Function buttons are void during Initial Setup.
•  If Auto Clock Set takes more than 30 minutes, 
press STOP and perform settings manually. (See 
pages 19 -21.)
SELECT
▲▼ ◄ ►EJECT
STOP
POWER
STOP
•  If you use a cable box, turn it on and set it to the 
Public Broadcasting Service (PBS) channel in 
your time zone. If you use a DSS receiver, it 
must be turned off.
Press POWER on the remote or unit. Auto 
channel and clock set starts.
Initial Setup -Ready to Play- 
						

							19
TV Operation
5 Press ▲▼ to select “AUTO SET,” 
then press SET.
•  After Channel Auto Set is finished, Clock Auto 
Set will be performed. (If clock is set manually, 
Clock Auto Set will not be performed.)
2 Press ▲▼ ◄ ► to select “CH.”
3 Press SET. 1  Press ACTION to display MAIN 
MENU.

						

							20For assistance, please call : 1- 800-211- PANA(7262) or, contact us via the web at:http://w w w.panasonic.com /contactinfo
SET CLOCK
10/25/2004 MON 11:45AM
DST:ON
SELECT: SET:SET
END :ACTION
4 Press ▲▼ to select “MANUAL,” then 
press SET.
(“TIME ZONE ADJUST” appears only when 
auto clock is set.)
2 Press ▲▼ ◄ ► to select “CLOCK.”
3 Press SET.1  Press ACTION to display MAIN 
MENU.
5 Press ▲▼ and press SET to select 
and set the month, date, year, time, 
and DST (Daylight Saving Time). 
  To Make Corrections, repeatedly 
press ◄ to move to error, then 
correct.
6  Press ACTION twice to start the 
clock and exit this mode.
SET CLOCK
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST : 0
SELECT: SET:SET
END :ACTION
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
  Manual Clock Setting
4 Press ▲▼ to select “AUTO CLOCK 
SET,” then press SET. 3 Press SET.
SET CLOCK
AUTO CLOCK SET
MANUAL
SELECT: SET:SET
END :ACTION
2 Press ▲▼ ◄ ► to select “CLOCK.” 1  Press ACTION to display MAIN 
MENU.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
  Automatic Clock Setting
ACT ION
SET SELECT
▲▼ ◄ ►
POWER
PLAYSKIP-