Panasonic Tv Dvd Combination Pv 20df62 Operating Instructions

							41
Advanced Operation
1
Press DISPLAY in Play or Stop mode to
display “On-Screen Display.”
When DISPLAY is pressed, On-Screen Displays
show disc information (title/chapter/track number,
elapsed playing time) and unit information (repeat
play, Play mode).
Each press of DISPLAY changes the on-screen
display as follows. (Please refer to page 42 or 43.)
DVD Operation using On-Screen Displays
Ready Checklist
Unit is in DVD mode, press DVD.
DISPLAY button does not function while DVD
TITLE MENU is displayed.
Note
1)Press  to select the setting.
2)Press SET to set.
2
1)Press  (or  ) to select an item.
2)Press SET to set.
Selected disc information
Selected unit information
Normal Screen➛ ➛➛ ➛
➛
➛ ➛➛ ➛
➛
To make corrections,
press  and SET
repeatedly to move to
error, then correct.
 Pressing  is effective
for elapsing time
instead of the above
buttons. Press 
repeatedly to delete
the error, then
correct. For some functions the
setting will be
registered immediately
without pressing SET.
When numbers are
displayed (e.g. title
number), the NUMBER
keys are also available.
To return to the
normal screen,
press CLEAR or
DISPLAY repeatedly.


When DISPLAY is pressed
during playback of a Video CD
with Playback control, the
NUMBER keys are not available
on the displayed screen. In this
case, press DISPLAY again to
remove the displayed screen.
When 
 appears on the screen
while a button is being operated,
it means that the corresponding
operation is prohibited by the unit
or the disc.
Notes
SELECT :
SET : SET NEXT : D I SPLAY
T I TLE : 12 DVD
CHAPTER : 110:12:34
SELECT :
SET : SET NEXT : D I SPLAY
T I TLE : 12 DVD
CHAPTER : 240:12:34
SET : SET NEXT : D I SPLAY
TRACK : 12V I DEO  CD
PBC : OFF 0:12:34
SET : SET NEXT : D I SPLAY
TRACK : 17V I DEO  CD
PBC : OFF 0:12:34
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VO
LCH
CH VOL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTESURROUND
TIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
NUMBER
keys
SELECT
 SET CLEAR
DISPLAY
20_27DF62 (P36-43)Disc OP.p65 2002/04/16, 13:4341 
						

							42For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
SELECT :  
SET : SET NEXT : D I SPLAY
T I TLE : 1DVD
CHAPTER : 12 1 : 12 : 55
SET : SET NEXT : D I SPLAY
TRACK :    1V I DEO  CD
PBC : OFF 1 : 35 : 12
DVD Operation using On-Screen Displays (continued)
Detailed Descriptions of Each On-Screen Display
1. TITLE No.
Change the No. by pressing * or the NUMBER
keys, and press SET.
2. Chapter No.
Change the No. by pressing  or the NUMBER
keys, and press SET.
3. Disc currently being played
4. Elapsed playing time
The screen may be changed by selecting the
elapsed time.
 Change the elapsed time by pressing NUMBER
keys, and press SET.
(e.g.) 01 : 23 : 45 0 ➛ 1 ➛ 2 ➛ 3 ➛ 4 ➛ 5
 This function does not work with some discs.
Disc information screen (for DVD)
Track No. and elapsed playing time are not
displayed during play started from menu of Video
CDs with playback control.
When 
 appears on the screen while a button is
being operated, it means that the corresponding
operation is prohibited by the unit or the disc.
Disc information screen (for Video CD/ CD)
A. Track No.
Change the No. by pressing  or the NUMBER
keys, and press SET.
B. Playback control ON/OFF
[Video CD with playback control only]
C. Disc currently being played
D. Elapsed playing time
Notes
  OFF Video CD menu play is cleared.
  ON Video CD menu play is displayed.
  Video CD             CD
1
23
4
A
B
C
D
LIGHT
TITLE MENUDISPLAY ADD/DLT
DSS
CABLE
+VO
LCH
C
H VO
L
10
SUB TITLEANGLE AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTESURROUND
TIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
NUMBER
keys
SELECT
 SET
20_27DF62 (P36-43)Disc OP.p65 2002/04/16, 13:4342 
						

							43
Advanced Operation
SET : SET END  : D I SPLAY
PLAY
D I SC  REPEATRANDOM  PLAY
SELECT : 
SET : SET END : D I SPLAY
PLAY
CHAPTER REPEAT 
a. Repeat Play
Unit information screen
  Change the desired mode during play by pressing , and press SET.
DVD
Video CD/CD
b. Play mode [Video CD/ CD only] (See page 39 or 40.)
PROGRAM  PLAY     program play
RANDOM  PLAY     random play
              --
---      normal play
Detailed Descriptions of Each On-Screen Display
a
b
 CHAPTER/TITLE REPEAT PLAY (DVD) TRACK/DISC REPEAT PLAY (Video CD/CD)
For your reference
*Important:If a remote control button does not work when pressed, press the DVD button on the remote
and try the button again.
TITLEchapterchapter
chapter
CHAPTER REPEAT
TITLE REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
tracktrack
track
TRACK REPEAT
DISK REPEAT
NORMAL PLAY
CURRENT PLAYBACK POSITION
CHAPTER REPEAT
TRACK REPEATTITLE REPEAT
DISC REPEATREPEAT OFF
REPEAT OFF
20_27DF62 (P36-43)Disc OP.p65 2002/04/16, 13:4343 
						

							44For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
MP3 Playback Operation
1Press POWER* on the remote or unit.
Press OPEN/CLOSE,
and then place a MP3 disc into the disc tray.
Press OPEN/CLOSE to close.
2
MP3 Playback
You can use this unit to play MP3 format audio recorded for
personal use with a computer etc. onto a  CD-R or CD-RW.
Play may not be possible in some cases due to the
condition of the recording.
3
MP3 MENU is displayed and playback is
started automatically. (The MP3 CD directory is
displayed.)
ROOT
VA
TECHNO
  
POPS
JAZZ
END_WALTZ
DD_CUB I C 
N
OCTURNE
NORN

Function
StatusCounter
PLAY MODE
Folder area
File area
Parent
folder
(The currently
displayed folder
turns green)(The selected
MP3 file/folder
is displayed
with a cursor.)
(The MP3 CD directory structure
displayed in the above example OSD is
shown in the diagram at left.)

:MP3 file
:Folder
:Parent folder
4

Forward/Reverse Search
Press FF/SLOW+ or REW/SLOW- during play.
Press PLAY to release.
Search speed, slow at first, increases with each
additional press of the button up to 4 levels.

Forward/Reverse Track Skip
Press SKIP 
| or | SKIP during play.
Each press skips a track.
If pressed within first 3 seconds of playback, skips to
the previous track. If over 3 seconds, returns to
first track. (|
 SKIP only.)
Only the SKIP | or | SKIP button can be used
for track skip selection during playback.
Put unit in Stop mode before performing folder/file
selection (see above right.)
Press STOP to stop playing.
5
Press OPEN/CLOSE to eject the disc.The MP3 MENU is closed automatically.

MP3 playback (During STOP mode)
1)Press 
 to select an MP3 file ().
2)Press SET or PLAY to start playback.

Select folder (During STOP mode)
1)Press 
 to select a folder ().
2)Press SET to display files/folders
contained in the folder.

Select parent folder (During STOP
mode)
1)Press 
 to select a folder ().
2)Press SET to make changes to
the previous directory display.

Select PLAY MODE (During STOP
mode)
1)Press 
  to move cursor to
PLAY MODE.
2)Press 
 to select the desired
PLAY MODE (see below).
Folder area operation cannot be done.
Only file area operation is possible.
Note
[PLAY MODE]
NORMAL:
All MP3 files are selected and
played back one time only.
SINGLE REPEAT:
The selected MP3 file is
played back repeatedly.
FOLDER REPEAT:
The MP3 files contained in
the selected folder are played
back repeatedly.
However, folders below the
selected folder are not played
back.
DISC REPEAT:
All MP3 files are played back
repeatedly.PLAY
   PLAY   MODE : NORMAL
00 :  00  :  00           MP3  MENU  ROOT                   . .               
  VA                       END_WALTZ
  TECHNO             DD_CUB I C
  POPS                  NOCTURNE 
  JAZZ                   NORN
20_27DF62 (P44-45 DVD).p65 2002/04/16, 13:4344 
						

							45
Advanced Operation
1
1)Press  to select
“DVD LOCK.”
2)Press SET to set
“ON” or “OFF.”
DVD Lock Ratings (DVD only)

  “ON” 
➛ ➛➛ ➛
➛ DVD Lock is activated.

  “OFF” 
➛ ➛➛ ➛
➛ DVD Lock is deactivated.
LEVEL 1 : LOCK ALL:
Playback of all DVDs, CDs and Video CDs is
prohibited. (Use to prohibit play of mature
theme DVDs not encoded with a rating level.)
LEVEL 2 : DVDs expressly for children can be played back.
LEVEL 3 to 7 :
DVDs for general audiences/children can be
played back. (DVDs with mature content are
prohibited.)
LEVEL 8 : NO LIMIT: (Factory preset)
All DVDs can be played back.
You can prevent playback of DVDs with a specific rating level which may be unsuitable
for children.
Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one you
preset, playback will be prohibited.

After DVD Lock is set and a
blocked DVD is played, this
message will appear. The
message may differ depending
on the disc.
To continue viewing a blocked
program for now,
Press 
 to select “YES” and
SET. Then, enter your 4-digit
secret code. When “NO” is
selected, blocked programs
cannot be viewed.
DVD Lock Feature
Ratings which are highlighted  in Green will be blocked;
those not highlighted (white letters) will not be blocked.
Perform DVD Lock setting in TV mode.
Enter your secret code to display LOCK menu.
(Perform “Enter Secret Code” steps on page 30.)
US   MOV I ES                       : OFF
       CHANGE   SETT I NGS
US  TV   PROGRAMS         : OFF
       CHANGE   SETT I NGS
DVD  LOCK                        : OFF
       CHANGE   SETT I NGS  SELECT :                  SET : SET   END       : ACT I ON   
           LOCK    
 NEXT   PAGE
SELECT : 
SET : SET END : D I SPLAY,
YOUR  SELECT I ON  EXCEEDS  THE
PLAYER  S  RAT I NG  L I M I T.
DO  YOU  WANT  TO  CHANGE  THE
LIMIT?
YES
NO
Discs not encoded with a rating level will play even if the jacket states it is for
mature audiences. For these discs, the DVD Lock Ratings will not work.
Caution
2
1)Press  to select
“CHANGE
SETTINGS.”
2)Press SET to display
screen.US   MOV I ES                       : OFF
       CHANGE   SETT I NGS
US  TV   PROGRAMS         : OFF
       CHANGE   SETT I NGS
DVD  LOCK                        : OFF
       CHANGE   SETT I NGS  SELECT :                  SET : SET   END       : ACT I ON   
           LOCK    
 NEXT   PAGE
3
1)Press   to
select rating level.
2)Press SET to select
“LOCKED” or
“UNLOCKED.”
   LOCK  ALL  SELECT :                   SET : SETEND       : ACT I ON   
1
2345 
6
7      
8     
UNLOCKED
4Press ACTION three times to end setup.
To change DVD LOCK settings
After entering your secret code in
step 3 on page 30, select “OFF”
to deactivate DVD Lock or
change the rating level.
*Important:If a remote control button does not work when
pressed, press the FM/TV, DVD button on the
remote and try the button again.
TITLE MENUDISPLAY ADD/DLT
PAUSE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
SUB TITLEANGLE
ZOOM AUDIOCLEAR
ENTER
ACTION RETURN
S E T
ACTION SELECT
 SET
20_27DF62 (P44-45 DVD).p65 2002/04/16, 13:4345 
						

							46For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
DISC LANGUAGES (DVD only)
To select and set the language of the audio soundtrack,
subtitles, or title/DVD menus for all discs to be played.
“AUDIO” selectionsTo select the audio soundtrack language.
(factory preset: English)
English/Spanish/French/Japanese
Original: Original disc language
OTHER ✱✱✱✱: Other language selection*
1
“SUBTITLE” selectionsTo select the subtitle language.
(Factory preset: AUTO)
AUTO :Same language selected for
“AUDIO”
If language set for “AUDIO”
is used in playback, subtitles
will not appear.
If another language is used
during playback, the subtitles
will appear in the language
selected at “AUDIO” setup.
English/Spanish/French/Japanese
OTHER ✱✱✱✱: Other language selection*
1
“MENUS” selections(factory preset: English)
To select the language used in title
menus or DVD menus.
English/Spanish/French/Japanese
OTHER ✱✱✱✱: Other language selection*
1
To enter OTHER ✱✱✱✱
      
 code number,
Press number keys (Please refer to
language codes on page 49).
To make corrections, press 
repeatedly to delete language code
number, and correct.
Settings for DVD Operation
1
3
Once initial settings are done, they
remain in memory (even after the
power is off) until changed.
This means the unit will always
operate under the same conditions
(especially DVDs) each time.
DISC LANGUAGES (See below.)Any languages offered on the disc can be set. If a language
not offered is set, the original disc language will be selected.
AUDIO OUTPUT (See page 47.)You can set the audio output that comes from the digital
audio output terminal.
STILL MODE (See page 48.)To select “FIELD” or “FRAME” to prevent jitter or to make
small text or fine patterns clearly visible in a still picture. When
“AUTO” is set, “FIELD” or “FRAME” is selected automatically.
TV MODE (See page 48.)To select whether the video material for a wide-screen will
be played back in Pan & Scan style or in Letterbox style.
Ready Checklist
Unit is in TV mode, press FM/TV.
4
1)Press  to select
“DISC LANGUAGES.”
2)Press SET to display
screen. Press ACTION* in Stop mode to display
MAIN MENU.
1)Press 
 to select
an item.
2)Press SET to set.DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : L e t t e r b o x
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : Letterbox
M A I N  MENU
DVDLOCK
CH
CLOCKTV
LANGUAGE
END         : ACT I ON SELECT  :                            SET : SET 
5312
1)Press   to
select “DVD.”
2)Press SET to display
screen.
1)Press 
 to select
an item.
2)Press SET
repeatedly for
desired language.
(Please refer right.)
5
D I SC  LANGUAGES
SELECT :  
SET : SET
END : ACT I ONAUDIO : EnglishSUBT I TLE : AUTO
MENUS : English
6
Press ACTION to redisplay DVD menu
and go to step 3 to setup another item.
Or, press ACTION three times to exit.
*1If the selected language is not offered,
the original disc language is selected.
20_27DF62 (P46-49 Setting DVD).p65 2002/04/16, 13:4346 
						

							47
Advanced Operation
Make settings according to amplifier
connected to optical audio output as
shown in above table.
When a dts decoder is not connected, to
enjoy dts DVD, please select audio output
other than dts on the dts DVD menu
screen. Otherwise, there will be no sound
from the unit speakers.
*1 Audio output from unit is converted to 48
kHz/16 bit in addition to audio from digital
audio output.
To enjoy high quality sound at 48 kHz/
20 bit /24 bit or 96 kHz, connect the
amplifier or decoder directly to the audio
output connectors, not to the digital
audio output connector. 
[Select “OFF” at
the “LPCM (DVD)”.]
*2 When connecting an amplifier (with an
optical digital input connector) which
does not contain the Dolby Digital or dts
decoder, be sure to select “OFF”.
If “Bitstream” is selected, starting DVD
play may cause such a high level of
noise as to be harmful to your ears and
damage the speakers.
*3 When a dts decoder is connected,
please select “Bitstream” in “dts”.
If “OFF” is selected, there will be no
sound.
AUDIO OUTPUT
Select the digital output to be output from the
optical digital audio output connector of the unit.
Do steps 1 and 2 on page 46.

 

 


 “LPCM (DVD)” selectionsOFF:Linear PCM of less than 48 kHz/16 bit is output.
When playing DVDs recorded in linear PCM of
over 48 kHz/20 bit or 96 kHz, no digital audio is
output. (Factory preset)
PCM:When playing DVDs recorded in linear PCM of
48 kHz/20 bit/24 bit or 96 kHz, digital audio
converted to 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to
48 kHz/16 bit or below for copyright protection.)

 

 


 “Dolby Digital” selectionsBitstream:Dolby Digital bitstream (1ch-5.1ch) is
output. (Factory preset)
OFF:No output.

 

 


 “dts” selectionsBitstream:dts bitstream is output. (Factory preset)
OFF:No output.

 

 


 “DRC (Dynamic Range Compression)” selectionsOFF:Normal audio range is selected. (Factory preset)
ON:For dynamic sound even at low volume, this is
useful for late-night listening. [Dolby Digital DVDs
only].

 

 


 “SURROUND” selectionsSurround Sound creates the effect of sound coming from
non-existent rear speakers even when only connected to
a 2-channel stereo system.
OFF:No Surround Sound effect. (Factor y preset)
ON:Surround Sound effect.
1)Press  to select
an item.
2)Press SET
repeatedly for output.
(See below.)
1)Press  to select
“AUDIO OUTPUT.”
2)Press SET to
display screen.
AUD I O  OUTPUT
SELECT :  
SET : SET
END : ACT I ONLPCM(DVD) : OFFDolby  Digital : Bitstream
d t s : OFF
DRC : OFF
SURROUND : OFF
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : F I ELD
TV  MODE : L etterbox
1
3 2
4
Turn off other surround effects when
using this surround effect.
For optimum effect, the distance between
the unit and the listener should be about
3 or 4 times the distance between the
right and left front speakers.
Notes
Recommended setting
LPCM
(DVD)
OFF
PCM*
1
PCM*1
PCM*1
Dolby
Digital
OFF
OFF*
2
Bitstream
Bitstreamdts
OFF
OFF*
2
OFF
Bitstream
No amplifier is connected
AV amplifier (with digital
audio input connector)
without Dolby Digital/dts
decoder
AV amplifier including
Dolby Digital decoder
AV amplifier including
Dolby Digital/dts decoder
*3
   Type of amplifier
   to be connected
Press ACTION to redisplay DVD menu
and go to step 2 to setup another item.
Or, press ACTION three times to exit.
*Important:If a remote control button does not work when pressed, press the FM/TV, DVD button on
the remote and try the button again.
20_27DF62 (P46-49 Setting DVD).p65 2002/04/16, 13:4347 
						

							48For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
STILL MODE
1
1)Press * to select
“STILL MODE.”
2)Press SET
repeatedly for mode.
(See below)
2
Do steps 1 and 2 on page 46.
AUTO:“FIELD” (Field still) or “FRAME” (Frame still) is
automatically selected during the still mode.
(Factory preset)
FIELD:“FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with “AUTO” on some discs.
FRAME:“FRAME” (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with “AU TO” on some discs.
Selecting TV MODE
a
1)Press  to select
“TV MODE.”
2)Press SET
repeatedly for mode.
(See below.)
b
Do steps 1 and 2 on page 46.
Pan & Scan :Widescreen video data is played in Pan
& Scan style (left and right of screen is
trimmed.)
Video data not formatted in Pan & Scan
will play in letterbox style.
Letterbox :Widescreen video data is played in
Letterbox style (top and bottom of screen
has black margin).
Set the screen display style for widescreen video
material playback.
Pan & Scan (Factory preset)
Letterbox
Set to reduce jitter in a displayed still picture or a
motion picture.
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : F I ELD
TV  MODE : L e t t e r b o x
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : F I LED
TV  MODE : L e t t e r b o x
3Press ACTION twice to exit this mode.
Press ACTION twice to exit this mode.c
Example
(Factory preset)
Settings for DVD Operation (continued)
*Important:
If a remote control button does not work
when pressed, press the DVD button on
the remote and try the button again.
LIGHT
TITLE MENUDISPLAY ADD/DLT
PAUSE
DSS
CABLE
+SKIPSKIPPLAY
STOP
SLOW/SEARCH
+VOLCH
CH VOL
10
SUB TITLEANGLE
ZOOM AUDIO
OPEN/CLOSE
CLEAR
ENTER
MUTESURROUND
TIMER
R-TUNE
ACTION RETURN
D V D FM/TV
S E T
ACTION SELECT
 SET
20_27DF62 (P46-49 Setting DVD).p65 2002/04/16, 13:4348 
						

							49
Advanced Operation
Language Code List
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/
or “MENUS” (see page 46).
   CodeLanguage
7079Faroese
7082French
7089Frisian
7165Irish
7168Scots Gaelic
7176Galician
7178Guarani
7185Gujarati
7265Hausa
7273Hindi
7282Croatian
7285Hungarian
7289Armenian
7365Interlingua
7378Indonesian
7383Icelandic
7384Italian
7387Hebrew
7465Japanese
7473Yiddish
7487Javanese
7565Georgian
7575Kazakh
7576Greenlandic
7577Cambodian
7578Kannada
7579Korean
7583Kashmiri
7585Kurdish
7589Kirghiz
7665Latin
   CodeLanguage
7678Lingala
7679Laothian
7684Lithuanian
7686
Latvian, Lettish
7771Malagasy
7773Maori
7775Macedonian
7776Malayalam
7778Mongolian
7779Moldavian
7782Marathi
7783Malay
7784Maltese
7789Burmese
7865Nauru
7869Nepali
7876Dutch
7879Norwegian
7982Oriya
8065Panjabi
8076Polish
8083
Pashto, Pushto
8084Portuguese
8185Quechua
8277
Rhaeto-Romance
8279Romanian
8285Russian
8365Sanskrit
8368Sindhi
8372
Serbo-Croatian
8373Singhalese
   CodeLanguage
8375Slovak
8376Slovenian
8377Samoan
8378Shona
8379Somali
8381Albanian
8382Serbian
8385Sundanese
8386Swedish
8387Swahili
8465Tamil
8469Telugu
8471Tajik
8472Thai
8473Tigrinya
8475Turkmen
8476Tagalog
8479Tonga
8482Turkish
8484Tatar
8487Twi
8575Ukrainian
8582Urdu
8590Uzbek
8673Vietnamese
8679Volapük
8779Wolof
8872Xhosa
8979Yoruba
9072Chinese
9085Zulu
   CodeLanguage
6565Afar
6566Abkhazian
6570Afrikaans
6577Ameharic
6582Arabic
6583Assamese
6588Aymara
6590Azerbaijani
6665Bashkir
6669Byelorussian
6671Bulgarian
6672Bihari
6678
Bengali; Bangla
6679Tibetan
6682Breton
6765Catalan
6779Corsican
6783Czech
6789Welsh
6865Danish
6869German
6890Bhutani
6976Greek
6978English
6979Esperanto
6983Spanish
6984Estonian
6985Basque
7065Persian
7073Finnish
7074Fiji
20_27DF62 (P46-49 Setting DVD).p65 2002/04/16, 13:4349 
						

							50For assistance, please call : 1-800-211-PANA(7262) or send e-mail : [email protected]
Before Requesting Service
Remote Control
Unit cannot be controlled...
ACTION, SELECT, SET, POWER,
etc. buttons cannot be selected...
Correction
Aim Remote directly at the remote sensor on the unit. (P. 9)
Avoid any object blocking signal path.
Inspect the remote batteries. (P. 4)
Exposing unit remote sensor to direct fluorescent or outdoor
light may cause signal interference.
Press FM/TV for TV mode. (P. 26)
Press DVD for DVD mode. (P. 26)
Press FM/TV for FM mode. (P. 26)
Check remote batteries.
Check the following points once again if you are having trouble with your unit.
Power
No power…
Power turns itself off...
Monitor
No picture or sound...
Poor picture with normal sound...
Poor sound with normal picture...
Poor TV reception...
No color or poor color...
Ghost (multiple) images...
TV programs cannot be watched...
Correction
Make sure your antenna system (TV or CABLE), is
correctly set. (P. 10)
Completely insert Power Plug into an AC outlet.
Set POWER button to ON.
Adjust BRIGHTNESS, SHARPNESS, and PICTURE
controls in the SET UP Video Adjustment. (P. 35)
Adjust VOLUME control. (P. 18)
Adjust SHARPNESS and PICTURE controls in the SET UP
Video Adjustment. (P. 35)
Adjust TINT and COLOR controls in the SET UP Video
Adjustment. (P. 35)
Install a directional antenna.
Make sure the selected channel is in unit’s memory. (P. 12)
Correction
Completely insert Power Plug into an AC outlet.
Set POWER button to ON.
Auto power-off (shutoff) occurs after about 5 min. in DVD
mode with no operation, or if there is no broadcast signal in
TV mode. Turn the power back on. (P. 17, 28)
If you cannot resolve the problem, please call the Customer Call Center for product
assistance at 1-800-211-PANA (7262.)
To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262.)
or send e-mail to : [email protected]
20_27DF62 (P50-51 Before Req.).p65 2002/04/16, 13:4350