Panasonic Tv Dvd Combination Pv 20df25 Operating Instructions

							31
Disc Operation
Te amo.
AUDIO:3 ESP
 Dolby Digital 3/2.1ch
SELECT  :AUDIO
I love you.
AUDIO:1 ENG
 Dolby Digital 3/2.1ch
SELECT  :AUDIO
Some DVDs have more than one title, e.g. movies. If the disc offers 
a title menu, you can select the desired title number. (Operation 
may vary according to the disc.)
1  Press TITLE in Play mode to 
display title screen.
DVDs may offer a special menu. This menu may include guides to 
unique contents, audio/subtitle languages, etc. Although contents 
and operation may vary, the following steps show basic steps for 
using menus.
1  Press MENU in Play mode to display main menu of 
DVD.
2 Press ▲▼◄► or NUMBER 
keys to select an item.
2 Press ▲▼◄► or NUMBER 
keys to select a title.
3  Press SET or PLAY to 
access.
•  Step 3 not necessary when using 
NUMBER keys. 

TITLE MENU
4 EPILOGUE2 A PAINFUL
SEPARATION
3MEETING
AGAIN 1 PROLOGUE
TITLE MENU
4 EPILOGUE2APAINFUL
SEPARATION
3MEETING
AGAIN 1 PROLOGUE
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 4
3MEETING
AGAIN
  Main Menu of DVD
 
Title Menu of DVD
You can change the audio soundtrack language, selected at 
Settings for DVD Operation, to a different language if available. 
(See page 41.)
(This operation works only with discs on which multiple audio 
soundtrack languages are recorded.)
1  Press AUDIO in Play 
mode to display the audio 
selection on-screen.
•  Display disappears after 5 seconds.
2  Press AUDIO repeatedly, 
▲▼, or NUMBER keys to 
select desired language.Audio soundtrack 
language being played 
back.
Notes:•  If, after several presses of the AUDIO button, the language does not 
change, language selection is not offered on the disc.
•  When disc is removed, language reverts to initial setting. If this language 
is not recorded on the disc, the language recorded will be heard.
  Audio Soundtrack Language
DVD-V
DVD-V
1 MAIN STORY
2 SUBTITLE
3 AUDIO SOUNDTRACK
4 INFORMATION
LOVE STORY
3  Press SET or PLAY to 
access.
•  Step 3 not necessary when using 
NUMBER keys.
Note:•  Repeat steps 2-3 if there is more than one menu.
Information on the audio 
stream currently being 
played back is displayed. 
(See page 43.)
LPCM96 kHz
or
48 kHz16 bit
Linear PCM disc 20 bit
24 bit
Dolby 
Digital1 ch - 5.1 ch Dolby Digital disc
dts1 ch - 5.1 ch dts disc
ENGEnglish
FRAFrench
DEUGerman
ITAItalian
ESPSpanish
NLDDutchSVESwedish
NORNorwegian
DANDanish
PORPortuguese
RUSRussian
JPNJapanese
Note:•  With DVD-RAM, Audio Soundtrack 
Language cannot be set. Audio 
stream and Audio mode (LR/L/R) 
settings can be made. Audio stream 
operation method is the same as for 
Audio Soundtrack Language. Press 
► to move the cursor to Audio 
mode, then press AUDIO or ▲▼ to 
select LR/ L/ R.
DVD-V
CHIChinese
KORKorean
MALMalay
VIEVietnamese
THAThai
*Other
AUDIO:1  LR
 Dolby Digital 3/2.1ch
SELECT  :AUDIO/◄ ►
The unit memorizes the point where STOP is pressed (STOP ► 
display on screen).
Press PLAY to resume play from this point.
Pressing STOP again in DVD mode or opening the tray cancels 
RESUME. However, RESUME is not canceled when power is turned 
off and on.
  RESUME Function
Notes:•  RESUME works only with discs for which elapsed play time is displayed 
during play.
•  When a DVD-RAM still picture is played back, the counter will not be 
displayed; however, RESUME will function.
DVD-VCDRAM • When  
 appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit 
or the disc. 
						

							32For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
I love you.Te amo.SUBTITLE: 3 ESP
SELECT :SUB TITLE
1  Press AUDIO in Play mode to display the audio 
screen.
2 Press ◄► to select 
“VOCAL.”
3  Press AUDIO or ▲▼ to set.
 
Vocal selection for Karaoke discs
DVD-V
VOCAL ONVOCAL OFFVOCAL V1VOCAL V2
VOCAL OFFVOCAL V1 + V2
DVD Karaoke (1 vocal)DVD Karaoke (2 vocals)
You can select a different subtitle language (if offered) than the one 
set at Settings for DVD Operation. (See page 41.)
1  Press SUB TITLE in Play 
mode to display the subtitle 
selection on-screen.
•  Display disappears after 5 seconds.
  Subtitle Language
DVD-VRAM
Notes:•  When closed captioning is used along with subtitles, they may overlap. If 
so, turn one function off. (See pages 20-21.)
•  If, after several presses of the button, the language does not change, 
language selection is not offered on the disc.
•  Subtitles may not change to the selected language immediately.
•  When disc is removed, subtitles revert to initial setting language. If the 
initial language is not recorded on the disc, the disc’s priority language will 
appear.
2  Press SUB TITLE repeatedly, 
▲▼, or NUMBER keys to 
select desired language.Number of subtitle 
language being played 
back.
Note:•  With DVD-RAM, the subtitle can 
only be set to ON/OFF. The subtitle 
language cannot be selected.
ENGEnglish
FRAFrench
DEUGerman
ITAItalian
ESPSpanish
NLDDutchSVESwedish
NORNorwegian
DANDanish
PORPortuguese
RUSRussian
JPNJapaneseCHIChinese
KORKorean
MALMalay
VIEVietnamese
THAThai
*Other
1  Press DISPLAY in Play or Stop mode to display “On-
Screen Display.”
When DISPLAY is pressed, On-Screen Displays show disc 
information and unit information.
•  Each press of DISPLAY changes the on-screen display as follows. 
(Please refer to pages 35-37.)
Note:•  When DISPLAY is pressed during play of a Video CD with Play control, 
the NUMBER keys are not available on the displayed screen. In this case, 
press DISPLAY again to remove the displayed screen.
•  DISPLAY button does not function while main menu of DVD, title menu of 
DVD, Direct Navigator, or Play List is displayed.
Selected disc information
 
  Information Display
Normal Screen

DVD-VRAMCD
Selected unit information


You can enlarge specific portions of a picture and select the zoom 
ratio using the ZOOM button on the remote during DVD playback.
1 Press ZOOM 
repeatedly to 
change display 
as follows.
•  You can enlarge the 
center portion of the 
image to one of 2 
magnifications.
Notes:•  The subtitle cannot be enlarged nor can its position be changed.
•  During picture zoom, “ZOOM1” or “ZOOM2” appears on-screen for 5 
seconds.
•  Zooming, on some discs, may result in poor picture quality, or may not 
operate at all.
•  The picture zoom feature does not work with a Video CD.
2 Use the ▲, ▼, ◄ and ► buttons to move the 
position up, down, left and right.
  Picture Zoom
×1.0 
(ORIGINAL)×1.5 
(ZOOM1)×2.0 
(ZOOM2)
1st 
press2nd 
press
3rd press
DVD-VRAM
Yeah !
Yeah !
AUDIO:
    2 ENG VOCAL ON
SELECT  :AUDIO/◄ ►
I love you.I love you.SUBTITLE: 1 ENG
SELECT :SUB TITLE
ZOOM1ZOOM2
TRACK:12
TIME :00:00:23
SET   :SET      NEXT:DISPLAYTITLE  :  2
CHAPTER: 12
TIME   : 01:12:55
SELECT:▲ ▼
SET   :SET      NEXT:DISPLAY
REPEAT       :OFF
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAYREPEAT       :OFF
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAY
PROGRAM:  2
TIME   : 01:12:55
SELECT:▲ ▼
SET   :SET      NEXT:DISPLAY
REPEAT       :OFF
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAY
VCD
LRL
Video CD
R
• When   appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit 
or the disc. 
						

							33
Disc Operation
Note:•  This unit was designed for playback only. DVD-RAM recording is not 
possible.
You can enjoy playing your personally recorded/edited DVD-
RAM discs on this unit.
6  Press PLAYLIST or D.NAVI to display Play List 
or Direct Navigator menu for easy title or scene 
selection.
7  Press STOP to stop playing.
8  Press OPEN/CLOSE to eject the disc.
  Play a DVD-RAMNotes:•  Titles in Direct Navigator and Play List cannot be changed using this unit.
•  With Direct Navigator, up to 99 programs can be displayed. With Play 
List, up to 99 titles (999 scenes) can be displayed.
•  While DVD MAIN MENU is displayed, Play List and Direct Navigator 
display will not appear even if PLAYLIST or D.NAVI is pressed.
3 Press OPEN/CLOSE.
1  Press POWER on the remote or unit.
4  Place disc into disc tray.
5  Press PLAY to start play. Disc tray closes 
automatically.
•  Play begins from the first program title recorded on the DVD-RAM.
Play List             Page1/5
No.  Date  Length  Title
SELECT:
SET   :SET           END:MENU1
2
3
4
00:01:00
00:03:12
00:15:01
00:03:00Movie Picture 
Playback
Still Picture 
Playback
Hybrid Playback
Partial Playback 2002/12/24 
5:15:41AM
2002/12/25
4:31:49AM
2002/12/25
8:24:25AM
2002/12/25 
12:45:00AM
Titles Recording time and 
datePage No. Play List No.Recorded time 
length
Direct Navigator        Page1/4
No.  Date  Length  Title
SELECT:
SET   :SET          END:TITLE1
2
3
4
01:00:00
00:30:00
01:30:25
02:00:50Drama
Pana NEWS
Tigers vs. Giants
Dinosaur 2002/12/24 
5:15:41AM
2002/12/25
4:31:49AM
2002/12/25
8:24:25AM
2002/12/25 
12:45:00AM
Program No.
Titles Recorded time 
length
Recording time and 
datePage No. Example: Direct Navigator menu Example: Play List menu POWEROPEN / 
CLOSE
NUMBER 
keys
PLAYLIST
STOPPLAY
D.NAV I
10
RAM
2  Press DVD to set remote to DVD mode.
DV D
DVD-RAM Operation
SELECT
▲▼◄►/
SET 
						

							34For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Direct Navigator        Page1/4
No.  Date  Length  Title
SELECT:
SET   :SET          END:TITLE1
2
3
4
01:00:00
00:30:00
01:30:25
02:00:50Drama
Pana NEWS
Tigers vs. Giants
Dinosaur 2002/12/24 
5:15:41AM
2002/12/25
4:31:49AM
2002/12/25
8:24:25AM
2002/12/25 
12:45:00AM
1  Press D.NAVI in Play/Stop mode to display the 
Direct Navigator menu.
2 Press ◄► to select a page and press ▲▼ or the 
NUMBER keys to select a title (Program No.).
If the DVD-RAM features Direct Navigator, a list of recorded titles 
is displayed. Simply select a title number and start playback. 
(Operation can vary with disc used.)
  Direct Navigator
Using NUMBER keys starts play automatically.•  The number of available titles varies with each disc.
4  Press D.NAVI to clear Direct navigator menu.
1  Press PLAYLIST in Play/Stop mode to display the 
Play List menu.
2 Press ◄► to select a page and press ▲▼ or the 
NUMBER keys to select a title (Play List No.).
If the DVD-RAM features a Play List, your preselected list of 
favorite scenes is displayed for easy access. (Operation can vary 
according to how you edited the DVD-RAM.)
  Play List
4  Press PLAYLIST to clear Play List menu.
Using NUMBER keys starts play automatically.•  The number of available titles varies with each disc.
Play List             Page1/5
No.  Date  Length  Title
SELECT:
SET   :SET           END:MENU1
2
3
4
00:01:00
00:03:12
00:15:01
00:03:00Movie Picture 
Playback
Still Picture 
Playback
Hybrid Playback
Partial Playback 2002/12/24 
5:15:41AM
2002/12/25
4:31:49AM
2002/12/25
8:24:25AM
2002/12/25 
12:45:00AM
3  Press SET or PLAY to start playing.•  Pressing SET or PLAY is not necessary when using NUMBER keys.3  Press SET or PLAY to start playing.•  Pressing SET or PLAY is not necessary when using NUMBER keys.
Example 1:
To select No. 12, first press the 10 key, then 1, then 2.
Example 2:
To select No. 2, press 2.Example 1:
To select No. 12, first press the 10 key, then 1, then 2.
Example 2:
To select No. 2, press 2.
Direct Navigator     Page1/4
No.  Date  Length  Title
SELECT:
SET   :SET          END:TITLE1
2
3
4
01:00:00
00:30:00
01:30:25
02:00:50Drama
Pana NEWS
Tigers vs. Giants
Dinosaur 2002/12/24 
5:15:41AM
2002/12/25
4:31:49AM
2002/12/25
8:24:25AM
2002/12/25 
12:45:00AM
Play List             Page1/5
No.  Date  Length  Title
SELECT:
SET   :SET           END:MENU1
2
3
4
00:01:00
00:03:12
00:15:01
00:03:00Movie Picture 
Playback
Still Picture 
Playback
Hybrid Playback
Partial Playback 2002/12/24 
5:15:41AM
2002/12/25
4:31:49AM
2002/12/25
8:24:25AM
2002/12/25 
12:45:00AM
RAMRAM • When  
 appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit 
or the disc. 
						

							35
Disc Operation
REPEAT       :OFF
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAY
TITLE  :  2
CHAPTER: 12
TIME   : 01:12:55
SELECT:▲ ▼
SET   :SET      NEXT:DISPLAY
NUMBER 
keys DISPLAY
a.TITLE:
Go directly to a preset title number.a.REPEAT MODE:
REPEAT MODE can be selected
1  Press DISPLAY in Play or Stop mode to display “On-
Screen Display.”
2 Press ▲▼ to select an item.
3  Press SET to enter selected 
item. Change the item 
by pressing ▲▼ or the 
NUMBER keys, and press 
SET.
1  Press DISPLAY twice in Play or Stop mode to 
display “On-Screen Display.”
2  Press SET to enter. Change the item by pressing 
▲▼ and press SET.
Disc information screen 1
Unit information screen 1
DVD-V
DVD-V
b.SURROUND MODE:
See page 40.
b.Chapter:
Go directly to a preset chapter number.
•  This function does not work with some discs.
c.Disc currently being played:
The type of disc currently inserted is displayed.
TITLE
chapter chapter chapter
REPEAT:
CHAPTER
REPEAT:TITLE
REPEAT:OFFCURRENT PLAYBACK POSITION Example:a
b
ac
d b
12 : 34 : 56     1 → 2 → 3 → 4 → 5 → 6
00 : 20 : 00     2 → 0 → 0 → 0 → SET
Example:
d.Elapsed playing time:
Go to a different scene by entering an elapsed playing time, then 
SET.
•  This function does not work with some discs.
•  If SET is pressed while making entries, unit returns to the condition 
before entries were made.
  Disc Operation -Using Information Screen-
TITLE  :  2
CHAPTER: 12
TIME   : 01:12:55
ENTER :0-9
SET   :SET      NEXT:DISPLAY
TITLE  :  2
CHAPTER: 12
TIME   : 01:12:55
ENTER :0-9
SET   :SET      NEXT:DISPLAY
SELECT
▲▼◄►/
SET 
						

							36For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
TRACK:12
TIME :00:00:23
PROGRAM PLAY
                NEXT:DISPLAY
REPEAT       :OFF
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAY
TRACK:12
TIME :00:00:23
ENTER :0-9
SET   :SET      NEXT:DISPLAY
b.TRACK:
Go directly to a preset track number. a.Play mode:
When Play mode is set (see pages 38-39), the mode name is 
displayed.
1  Press DISPLAY in Play or 
Stop mode to display “On-
Screen Display.”
2  Press SET to enter selected 
item. Change the item 
by pressing ▲▼ or the 
NUMBER keys, and press 
SET.
a.REPEAT MODE:
REPEAT MODE can be selected.
1  Press DISPLAY twice in Play or Stop mode  to 
display “On-Screen Display.”
2  Press SET to enter. Change 
the item by pressing ▲▼, 
and press SET.
b.SURROUND MODE:
See page 40.
Disc information screen 2
Unit information screen 2
CD
d.Disc currently being played:
The type of disc currently inserted is displayed.
track track track
REPEAT:TRACK
REPEAT:DISC
REPEAT:OFFCURRENT PLAYBACK POSITION Example:a
d
c
a
b
c.Elapsed playing time:
When disc information screen 2 is displayed, it is not possible 
to enter an elapsed playing time.
CD
b
TRACK:12
TIME :00:35:12
                     PBC OFF
PROGRAM PLAY
                NEXT:DISPLAY
Disc information screen 3
VCD
TRACK:12
TIME :00:35:12
                     PBC OFF
ENTER :0-9
SET   :SET      NEXT:DISPLAY
1  Press DISPLAY in Play or 
Stop mode to display “On-
Screen Display.”
2  Press SET to enter selected 
item. Change the item 
by pressing ▲▼ or the 
NUMBER keys, and press 
SET.
Unit information screen 3
VCD
1  Press DISPLAY twice in Play or Stop mode  to 
display “On-Screen Display.”
2  Press SET to enter. Change 
the item by pressing ▲▼, 
and press SET.REPEAT       :OFF
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAY
a
b
b.TRACK:
Go directly to a preset track number. a.Play mode:
When Play mode is set (see pages 38-39), the mode name is 
displayed.
d.Disc currently being played:
The type of disc currently inserted is displayed.c.Elapsed playing time:
When disc information screen 3 is displayed, it is not possible 
to enter an elapsed playing time.
a.REPEAT MODE:
REPEAT MODE can be selected.
b.SURROUND MODE:
See page 40.
track track track
REPEAT:TRACK
REPEAT:DISC
REPEAT:OFFCURRENT PLAYBACK POSITION Example:a
d
cb
e
e.Playback control ON/OFF:
ON:  Video CD menu play is displayed.
OFF:  Video CD menu play is not displayed. 
						

							37
Disc Operation
a.REPEAT MODE:
REPEAT MODE can be selected.
1  Press DISPLAY twice in Play or Stop mode  to 
display “On-Screen Display.”
2  Press SET to enter. Cursor moves to the right. 
Change the item by pressing ▲▼ and press SET.
Unit information screen 4
Direct Navigation 
(PROGRAM)
PLAY LIST
RAM
PROGRAM PROGRAM PROGRAM
REPEAT:
PROGRAM
REPEAT:DISC
REPEAT:OFFCURRENT PLAYBACK POSITION Example:
PLAY LIST PLAY LIST PLAY LIST
REPEAT:PLAY 
LIST
REPEAT:ALL 
PLAY LIST
REPEAT:OFFCURRENT PLAYBACK POSITION Example:
REPEAT       :OFF
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAY
b.SURROUND MODE:
See page 40.
a
b
PROGRAM:  2
TIME   : 01:12:55
SELECT:▲ ▼
SET   :SET      NEXT:DISPLAY
PLAY LIST:  2
TIME   : 01:12:55
SELECT:▲ ▼
SET   :SET      NEXT:DISPLAY
Example:
PLAY LIST Example:
Direct Navigation (PROGRAM)
1  Press DISPLAY in Play or Stop mode to display “On-
Screen Display.”
2 Press ▲▼ to select an item.
3  Press SET to enter selected item. Change the item 
by pressing ▲▼ or the NUMBER keys, and press 
SET.
Disc information screen 4
b.Disc currently being played:
The type of disc currently inserted is displayed. a.Direct Navigation (PROGRAM) or PLAY LIST No.:
Go directly to a preset title number.
RAM
ab
c
ab
c
Example:
12 : 34 : 56     1 → 2 → 3 → 4 → 5 → 6
00 : 20 : 00     2 → 0 → 0 → 0 → SET c.Elapsed playing time:
Go to a different scene by entering an elapsed playing time, 
then SET.
•  This function does not work with some discs.
•  If SET is pressed while making entries, unit returns to the condition 
before entries were made.
PROGRAM:  2
TIME   : 01:12:55
SELECT:▲ ▼
SET   :SET      NEXT:DISPLAY
PROGRAM:  2
TIME   : 01:12:55
ENTER :0-9
SET   :SET      NEXT:DISPLAY
PROGRAM:  2
TIME   : 01:12:55
ENTER :0-9
SET   :SET      NEXT:DISPLAY
• When   appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit 
or the disc. 
						

							38For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Notes:•  Up to 16 tracks can be programmed.
• “◄” or “►” (depending on disc) indicates additional PROGRAM PLAY 
screen. Press ▲▼◄► for next or previous screen.
•  To clear the last programmed track, press ▲▼◄► to move to “CLEAR 
LAST” and press SET. (Pressing CLEAR also clears.)
•  To clear all programs, Press ▲▼◄► to move to “CLEAR ALL” and press 
SET. (Programs are also cleared when the power is turned off or the disc 
is removed.) You can program specific tracks and order of play.
1  Press ACTION in Stop mode to display MAIN MENU.
10 Press ▲▼◄► to select “START.”
11  Press SET to start play of programs in the sequence 
selected.
To cancel, press STOP during 
play, then press CLEAR.
2 Press ▲▼◄► to select 
“DVD.”
3  Press SET to display DVD 
MAIN MENU.
4 Press ▲▼ to select “PLAY 
MODE.”
5  Press SET to display PLAY 
MODE screen.
6 Press ▲▼ to select “PROGRAM PLAY.”
7  Press SET to display screen.
8 Press ▲▼◄► to select a track number.
 (Track numbers on disc are displayed.)
9  Press SET to set.
•  Repeat steps 8-9 to select another 
track.
•  The selected track is added on the 
right side.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
  Program Play
CD
NUMBER 
keys
ACT ION
CLEAR
Special Disc Operation
       DVD MAIN MENU
DISC LANGUAGES
AUDIO OUTPUT
STILL MODE    :AUTO
TV MODE       :4:3 Pan&Scan
PLAY MODE
 SELECT    :▲ ▼
 SET       :SET
 END       :ACTION
         PLAY MODE
PROGRAM PLAY
RANDOM PLAY
 SELECT    :▲ ▼
 SET       :SET
 END       :ACTION
        PROGRAM PLAY
      DISC          PROGRAM
◄ 1  2  3  4     12  3  5  2
  5  6  7  8     16
  9 10 11 12
 13 14 15 16►
   CLEAR LAST
   CLEAR ALL         START
 SELECT    :▲ ▼ ◄ ►
 SET       :SET
 END       :ACTION
        PROGRAM PLAY
      DISC          PROGRAM
◄ 1  2  3  4     12  3  5  2
  5  6  7  8     16
  9 10 11 12
 13 14 15 16►
   CLEAR LAST
   CLEAR ALL         START
 SELECT    :▲ ▼ ◄ ►
 SET       :SET
 END       :ACTION
VCD
SELECT
▲▼◄►/
SET 
						

							39
Disc Operation
Tracks are played in random order.
1  Press ACTION in Stop mode to display MAIN MENU.
2 Press ▲▼◄► to select “DVD.”
3  Press SET to display DVD MAIN MENU.
4 Press ▲▼ to select “PLAY MODE.”
5  Press SET to display PLAY MODE screen.
6 Press ▲▼ to select “RANDOM PLAY.”
7  Press SET to begin random play.
To cancel, press STOP during play, then press CLEAR.
4  Press SET to enter Select mode.
5 Press ▲▼ to select “DISC.”
(Unit Information Screen) (Unit Information Screen)
1  Do steps 1-11 on page 38.
2  Press DISPLAY to display Disc Information screen.
(Disc Information Screen)
3  Press DISPLAY again to display Unit Information 
screen.
6  Press SET to set mode.To cancel, select “REPEAT 
OFF” in step 5, then press SET.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
  Program Repeat Play 
Random Play
CDCD
       DVD MAIN MENU
DISC LANGUAGES
AUDIO OUTPUT
STILL MODE    :AUTO
TV MODE       :4:3 Pan&Scan
PLAY MODE
 SELECT    :▲ ▼
 SET       :SET
 END       :ACTION
         PLAY MODE
PROGRAM PLAY
RANDOM PLAY
 SELECT    :▲ ▼
 SET       :SET
 END       :ACTION
REPEAT       :OFF
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAY
REPEAT       :OFF
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAY
REPEAT       :DISC
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAY
(Unit Information Screen) (Unit Information Screen)
REPEAT       :DISC
SURROUND     :OFF
SELECT:▲ ▼
SET   :SET       END:DISPLAY
VCDVCD
TRACK:12
TIME :00:00:23
PROGRAM PLAY
                NEXT:DISPLAY
• When   appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit 
or the disc. 
						

							40For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
ANGLE:2/2
SELECT :ANGLE
Enjoy a surround-like effect if you are using two front speakers only. 
The effect is broadened and sound seems to come from virtual 
speakers on either side if the disc has surround signals recorded on 
it.
1  Press VSS in Disc mode.•  The Surround sound effects can be changed by pressing VSS 
repeatedly as shown in the figure below.
Notes:•  Turn off the surround effects on the other equipment. 
•  V.S.S. will not work, or will have less effect, with some discs.
•  Turn V.S.S. off if it causes distortion.Default
Some DVDs are recorded at lower than average volume levels. 
For these DVDs, this unit can be set so that the average volume is 
increased automatically.
1  Press ACTION to display MAIN MENU.
2 Press ▲▼◄► to select 
“TV.”
3  Press SET to display SET 
UP TV screen.
6  Press ACTION twice to return to the normal screen.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
SET UP TV
CAPTION
INPUT SELECT :TUNER
SET UP VIDEO/AUDIO
DVD VOL ADJUST :+2
SELECT: SET:SET
END :ACTION
  DVD Volume Adjust 
V.S.S. (Virtual Surround Sound)
DVD-V
4 Press ▲▼ to select “DVD 
VOL ADJUST.”
5  Press SET to set the level 
(0, +1, or +2).
Notes:•  This function not available with DVD-RAM.
•  ANGLE Indicator lights up on the unit when a scene recorded from 
different angles is detected.
•  The angle number can be set beforehand so that the angle is switched 
whenever ANGLE Indicator lights up.
DVDs may contain scenes shot from multiple camera angles 
allowing the same scene to be viewed from different angles. You 
can view these angles, if available, using the ANGLE button.
1  Press ANGLE in Play mode 
to display the angle selection 
on-screen.
2  Press ANGLE repeatedly, 
▲▼, or NUMBER keys to 
select the desired angle.
•  Display disappears after 5 seconds.Number of angle being 
played back.
  Multiple Angle Viewing
DVD-V
DVD-VCDRAM
Note:•  DVD Volume Adjust works only when sound is in Dolby Digital.
SURROUND:OFF
SURROUND:1
SURROUND:2
SURROUND:3
ANGLE:1/2
SELECT :ANGLE
• When   appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit 
or the disc.