Panasonic Toughbook Arbitrator Ccr24pna_user_guide

---------------------------------------------------------------------------------------
Read this user guide carefully for safe operation and proper use of 
the product.
Features and specifications are subject to change without 
notification.
Toughbook Arbitrator
WIRELESS TRANSCEIVER SYSTEM
CCR24PNA
User Guide  
VERSION 1.1 

TABLE OF CONTENTS
114
SPECIFICATIONSPowerDC 12V for RX
Frequency (MHz) 2.4GHz FHSS with 2,400 ~ 2,483MHz
Number of Channel 95 Channels
Channel Space 864KHz
Speech Coder 32Kbps ADPCM with Parity
Type of Modulation GFSK  MODULATION / DEMODULATION
Data Rate 576Kbps Time Division Duplex
Receiver  Sensitivity
Power 
Consumption Min: -90 dBm
Typ.: -92 dBm to -94 dBm  @BER = 0.001
Max: -96 dBm
Maximum when charging:  610mA
Battery Talk Time: 12 Hours
Charge Time: 3 Hours
Battery Capacity Lithium-Ion Polymer...

CAUTION 
312
Warning(1) Immediately discontinue use of the battery if, while using, charging, or 
storing the battery, the battery  emits an unusual smell, feels hot, 
changes color, changes shape or  appears abnormal in any other way. 
Contact your authorized reseller  or Panasonic if any of these 
problems are observed.
(2) Do not place the batteries in microwave ovens, high-pressure containers,  or on induction cookware.
(3) In the event that the battery leaks  and the fluid gets into one’s eye, do...

510
PACKAGE CONTENTS
- Transmitter (TX)
- Receiver (RX)
- Plug-in Microphone (MONO)
- Mounting Bracket for Receiver with Screws
- Rechargeable Li-Ion Battery
- Leather Pouch
- External Antenna
- Desktop Charger for Transmitter
- AC Power Supply for Desktop Charger
- Charger Stand for Desktop Charger
- RF Main Cable
- In-car Microphone (MIC)
- User Guide
Mode TALK            REC Low 
Battery Out of 
Range Mute
TALK 
REC 
OFF:
GREEN 
On
REC:
GREEN 
Blink
LED OFF
LED + 
Vibration GREEN 
On Vibration 
(1...

78
DESCRIPTION -
 
Receiver1
Antenna Connection 5Serial Number Label
2 Audio Recording LED 6Main Cable Connection
3 Battery Charging LED 7FCC, UL, IC Labels
4 Charging PIN/Matching ID
1
2
3
4 5
6
7
DESCRIPTION – RF Main CableConnection with the system
- Audio Out:  Connects to “Audio In” port in the back of the recorder
- Power (Red), Power GND (Black ):  Connect to the engine battery
- TX Indication (Red):   Connect to GPIO cable 
- Mute Indication (Orange):   Connect to GPIO cable 
- Trigger REC...

96
DESCRIPTION – Receiver (RX) LED’s
Note: 
When the TX is docked in 
the RX, the  GREEN Talk LED will 
blink once.  If it continues to blink, 
please refer to Troubleshooting 
section for more details.
Note: When fully charged, the TX 
stops drawing current from the 
battery to prevent overcharging.
Audio Recording LED:GREEN  = Unit recording        
(after the TX Talk button has 
been pressed)
Battery Charging LED:RED = Charging
GREEN  = Fully charged
DESCRIPTION – Transmitter (TX)
1
23
4
67
8 11
9
10...

114
INSTALLATION & OPERATIONInstallation:1) Install the mounting bracket by using the screws
2) Slide the RX Set onto the bracket
3) Connect the main cable to the RX
4) Connect external antenna to the RXOperation:1) Charge the TX for at least 3 hours 
2) Switch the power on (located on the bottom of the TX)
3) Place the TX into the RX to synchronizeNote:  Disconnect the battery or turn off the device when the TX is not in use  for long periods of time
CAUTION WarningDo not continue charging the battery...

132
TROUBLESHOOTING
ProblemCheck  points
No reception  -Check the battery status 
- Check the connection and cables
-
 
Check the communication range
Poor reception,  static, noise -
 
Change the loca
tion of the RX
-
 
Check the communication range
-
 
Check to see if unit is placed near              
TV, speakers, or other electronic 
devices
Unit does not  respond -
 
Check the battery status
-
 
Check the power switch on the bottom 
of the unit
-
 
Check the connection and cables
 
-
 
If the problem...